Result: class 3 to class 2 adapter

electric brakes, use the Vehicle Wiring Harness w/ Brake Controller Adapter - 7 Way # TK22115 | I have a 2017 Mercedes 170 4x4 with factory step, what trailer hitch would I be looking at? | For your 2017 Mercedes-Benz Sprinter...

You are correct the etrailer 2-in-1 Exterior Windshield and Wiper Blade Cover - 70" Wide x 39-3 | It looks like the e98899 is too small. Suggestions? The vinyl Class C solutions look like they wont fit a standard...

Receiver - Custom Fit - Class III - 2", part # 75601, you attached to your question. If you have | Hi, I have a 2016 Mercedes Sprinter 2500 - 170 wheel base, passenger van, what does it mean? Hitch does not...

be carried? for use in 24ft class B sprinter RV | can a hitch extension be installed at the end of the carrier so that a bicycle rack can also be carried? for use in 24ft class B sprinter RV | I have a solution for you, however,...

. The Gen-Y adjustable mount will make a great high low adapter and the built-in 2-1/2" x 2-1/2" receiver | Can the Gen Y Riser be used with a BlueOx Avail Tow Bar in order to tow a 2022...

with a swing-away adapter, the Yakima BackSwing Swing Away Hitch Extender part # Y02483. | I am looking for a cargo carrier for a 2019 Mercedes Sprinter 2500 class B motor home. I would like a swing away so I can open back...

Controller Adapter # TK22115 is also available. If you need a ball mount for your trailer, I recommend | I need a hitch for a 2021 Sprinter 2500 with 144" wb. It has the standard bumper on it. I also need to be able to use...

a drawtite hitch class 2 i believe rating at 500 pounds TW that i have purchased from etrailer a while back | how much weight can a 500 pound TW hitch handle? lets say i have a pick up truck that has a drawtite...

adapter for a bike rack? If so, we have the Yakima BackSwing part # Y02483. | 2019 Mercedes sprinter 250 with step bumper and 170 wheelbase. Which hitch do I need to order ? Also, do you happen to sell the swing away arm that...

Yes, the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2", part # 13358, will fit your | Part Number 13375 will not fit 2020? Will 13358 fit the 2020 Mercedes sprinter 2500? | Yes, the Curt Trailer...

. The Draw-Tite hitch has a class III rating with 2" receiver tube opening. It will work great for towing or hitch | Hello. Trying to figure out which hitch will work on a 2020 Mercedes Sprinter 170 WB, 2500...

, and that is what the hitch fitment is based on. That said, what I recommend is the etrailer Class 3 Hitch # e76AR | I have a 2020 sprinter 2500, but it says the body is 177 inches does that make a difference...

without the swing option. We are looking for a good quality 2” hitch cargo carrier for a 2019 Mercedes | I had sent in a previous question about a swing arm carrier but we’ve decided we can probably live without the swing option....

of these hitches will install the same way. All of the hitches are Class III hitches with 2 inch receivers | Hi I have the new 2016 MB Sprinter. It is a 2500 with 170 inch wheel base and a step bumper. I...

I have a 2016 Freightliner Sprinter 2500 144inch wb factory step bumper and I want to get a 2inch | I have a 2016 Freightliner Sprinter 2500 144inch wb factory step bumper and I want to get a 2inch hitch receiver, 7 pin trailer...

a passenger van and the frame members do NOT measure 30-3/8 inches apart measured outside of frame to outside | Does the C1388 fit 2020 Sprinter 2500 170 extended, standard bumper? | As long as your 2020 Sprinter 2500 with...

of the Mercedes-Benz Sprinter. Both hitches are Class III hitches with 2 inch receivers and they are all rated | From your perspective which hitch is better, the curt 13358 or the draw-tite75601? | Both the...

As long as your Sprinter doesn't have the 30-3/8 inch frame width (measured outside frame | I have a 2019 Sprinter 144 with a stock bumper. I want to buy an aftermarket hitch and an aftermarket rear step. Any recommendations?...

Adding the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" Item # 75601 | does exhaust need modified with the 75601 | Adding the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit...

Hello, I recently installed the 13358 Class III hitch. Due to rust on the existing bolts, I | Hello, I recently installed the 13358 Class III hitch. Due to rust on the existing bolts, I opted to use anti-seize on the threads....

We do have 2-inch Class III trailer hitch fits for your 2016 Mercedes-Benz Sprinter 2500 so long | Hello, can you ,please, clarified - what hitch suitable for my model, thank you. Mb sprinter 2500 worker 2016...

? Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2 Item # 75549 Will this interfere | I have a Freightliner Sprinter 4x4 with standard bumper and no step. Is this the hitch I need? Draw-Tite...

We have 2-inch Class III trailer hitches for your 2017 Sprinter 2500 that you can view | What is needed to install a hitch, 7pin trailer connector and brake controller? | We have 2-inch Class III trailer hitches...

Have a class b rv on a sprinter 2500… looking to add a KUAT NV2.0 bike rack and two bikes. one | Have a class b rv on a sprinter 2500… looking to add a KUAT NV2.0 bike rack and two bikes. one about 2O lbs...