Recommended Roof Rack That Can Work With A Kayak Carrier For 2004 Mazda Tribute
Can the Thule ride on adapter be used to carry 2 j style kayak racks? | Rhe Thule Ride-On Adapter part TH532 has been discontinued but will only work with bike carriers. This adapter uses plastic mounting hardware and cannot handle the stress...
Replacement Gear box for Venture 900-258125
I have a 2015 Shockwave 5th wheel toy hauler. I believe I need a new landing gear box. The landing gear motor is a Venture serial number 9000-258175 LCI PIN 142178 12 vdc - 30 amp. Do you have a replacement gear box that will fit? | The correct...
Troubleshooting Wiring Harness for 2002 Mazda Tribute With Tow Package
Hello, I have plugged in to the factory tow 4 way and I only have running lights. No turn signals and no brake lights? What should I do? Thank you! | I would first go to the connector behind the paneling in the cargo area on the driver side,...
Does Demco Base Plate Kit DM9517113 for 2004 Mazda Tribute Fit Base Model
I have a 2004 mazda tribute. Does your kit cover all tribute models. I have base model. | Yes the Demco base plate kit part # DM9517113 that you referenced does fit the base model 2004 Mazda Tribute like you have. |
Trailer Left Brake/Turn Signal Goes On then Shuts Off w/Curt Wiring Harness on 2006 Mazda Tribute
I have a mazda tribute 2006 non-towing package. Purchase the curt connector for the vehicle to be able to plug it to my trailer. After i install the adapter to the vehicle side, I test it with a 4 pin flat trailer tester. The car was off and...
Which Fuse of 2005 Mazda Tribute with Tow Package for Activating Circuits
I have a 05 Mazda tribute with the towing go plug in need to know what fuse I need to make it work or relay and where does it go in fuse box | From customers we've learned that the fuse slot number 1 is the one associated with activating the...
trailer Hitch Recommendation For 2005 Mazda Tribute To Tow Small Boat And Trailer
Hi, I have a 14-ft aluminum boat/motor/trailer package total weight less than 1000 lbs. The trailer has a two-inch ball receiver - what is my best option for pulling this with my little SUV? | The trailer hitch I recommend for your 2005 Tribute...
Why Does T-One Vehicle Wiring Harness Need to Be Connected to Both Taillights on 2002 Mazda Tribute
Hi if i only need the tail and brake lights on my trailer dont i only need to connect wiring to one of the tail lights of the car? the brake lights on the trailer are on one system of wires | You will want to connect the Vehicle Wiring Harness...
Trailer Wiring Recommendation for a 2003 Mazda Tribute
Will 48895 work on a 2003 Mazda Tribute LX? | We have several trailer wiring options that are confirmed to fit your 2003 Mazda Tribute, but the part # HM48895 that you referenced is not one of them. Instead you would want the part # 118343...
Is a Trailer Hitch Receiver Adapter Needed to Tow a Boat With 2009 Mazda Tribute?
I have a 1 1/4 inch receiver and i need to pull a boat so id like to put on an extension with a 2 inch receiver, any thoughts | Using an adapter to go from a 1-1/4 inch receiver to a 2 inch receiver will have zero impact on whether or not your...
Will the Draw-Tite Max-Frame Class III Trailer Hitch Fit on a 2005 Mazda Tribute S
will this hitch fit 2005 Mazda Tribute S? I have read conflicting reports. I am ready to order but need to make sure it will fit. Thank you | I verified with my contact at Draw-Tite that the Draw-Tite Max-Frame Class III Trailer Hitch, # 75751,...
Instructions For Tow Ready T-One Wiring Harness, # 118343, On 2001 Mazda Tribute
Instructions are easy, but not clear. Please answer the above question. The instructions in note four say to unplug center black. My center is gray. My vehicle is a 2001 Tribute. Step 3 reads from the passenger side so my understanding is green...
Can a Taillight Converter Module Go Bad After Working Properly for Months
Is it possible for the Circuit Protected Modulite Powered Taillight Converter to go bad? I installed this several months ago and now it does not work. Using a test light, all circuits work beforeinch the converter, but nothing works afterinch...
Will the Draw-Tite # 36501 Receiver Fit with an OEM 1-1/4 Receiver on a 2005 Mazda Tribute
Will this work if you already have the factory installed, 1 1/4” hitch on your vehicle? I have seen some models that install underneath the factory hitch and dont require modification. 2005 Mazda Tribute V6 w factory hitch | Since the trailer...
Trailer Wiring Recommendation for 2010 Mazda Tribute without Backup Sensor
2010 Mazda Tribute - I am ordering trailer hitch #e56AR Do I need to order a wiring harness? if so, which one? Are any other electrical parts necessary? My Mazda does not have a back up sensor. | Yes, if you plan on towing a trailer and not...
Replacement Hardware Kit for Hitch Installation on a 2005 Mazda Tribute
hello I need the the bolts and nuts for the hitch installation for a 2005 mazda tribute. What is the part number please? Thank you | I would be happy to help you. You need the Replacement Hardware Kit for Trailer Hitches item # RHK. This will...
Towing Capacity, Brake Controller, and 7-Way Trailer Connector for 2003 Mazda Tribute
I was looking at upgrading my hitch and adding a brake control with 7 way flat to a 2003 Mazda Tribute to tow a 1700 lb trailer with brakes and a couple of quads. I see the tow rating of this car is listed at 3500 lbs, but the factory towing...
Can LEDs for Optronics RV Interior Dome Light # RVILL39 Be Replaced
Hello, This weekend our oval LED light with a switch stopped working. I took the lens off and found all these little squares, of which would be the LED lighting. How do I change this out? Thank you! | The LEDs inside the Optronics RV Interior...
Fastener Kit Needed for the Draw-Tite Trailer Hitch # 36501
How can I get the fastener kit 36501F for this hitch? | The proper mounting hardware can be ordered for the Draw-Tite Class II Trailer Hitch, item # 36501, by using item # RHK, replacement hardware kit, in the search box and then entering the...
Does the Replacement Pin and Tether # P307 Have a Ball Bearing
Is this the pin with ball bearing ? | Yes, the Replacement Pin and Tether # P307 that you referenced has a ball bearing in the pin to keep it from sliding out. I attached a picture that shows the pins pointed out on a Swagman XC Bike Rack...
Trailer Brake Controller Recommendation for a 2009 Mazda Tribute
mazda tribute 2009 what is the best brake controler i can buy for my tribute | For a 2009 Mazda Tribute the most popular brake controller, and the one I recommend, is the Tekonsha P2, # 90885. This controller is reliable, easy to use, and easy...
Trailer Hitch Recommendation for 2005 Mazda Tribute
Will this hitch work on my 05 Mazda Tribute | The Curt # E-3S is meant to install on a full or medium size truck step bumper, and wouldn't work on your Tribute. We do offer custom designed hitches meant to fit your vehicle, and that's what...
Roof Rack Recommendation for a 2005 Mazda Tribute Flush Rails
am i able to attach Rhino Rack Roof Rack - DK28 on to my 2005 Mazda tribute with flush rails | The only roof rack designed to fit the flush rails on your 2005 Mazda Tribute roof is made by Inno and includes the following parts: - 42" Square...
What is Narrowest Wheel Width Tire Size 205/75-14 Can Fit
looking for tires/rims for a starcraft autumn ridge outfitter 18 qb tire: 205/75R14 rim : 14 5x5 Would a rim size 14 5x4.5 work ? Thank You | The narrowest rim width that a 205/75-14 can fit on is 5 inches so a 14 by 4.5 inch wide wheel...
Filter Your Search
Contact and Help