How Do I Find the Weight Rating on an Old Hitch for a 1999 Chevy S-10?
How can I determine if it is a class 111 or class lV hitch. | Your hitch's maximum tow weight rating can sometimes be imprinted into the steel somewhere on the crossbeam. You may need to clean it up really good and feel around for it on that...
Can Optronics LED Trailer Light, Part # STL79RB, Replace Tail Lights on 1996 Chevy S-10 Pickup
Im installing a left and a right stl79rb for a replacement of my 96 s10 tail lights. I want to use the stl79rb for running and brake lites only and wire a seperate led amber bulb for left and right turn signal how do I do this and do I need...
How to Connect 4-way to 1991 Chevrolet S-10 Pickup
How to connect them | To add a 4 pole trailer connector to your S-10, I'd recommend the Curt T-Connector, part # C55312. This custom-fit harness plugs into your Chevrolet S-10 Pickup's wiring harness, which is located beneath your vehicle,...
Why Does my 2 Inch Hitch have a 1/2 in Pin Hole and a 5/8 in Pin hole
I have a 2inch x 2inch hidden hitch. It has the hitch pin holes for a 1/2inch and a 5/8inch pin. I need a 1/2inch pin and can not tell if this will work with a 2inch x 2inch hitch. Most 1/2inch pins specify that they are for 1 1/4inch hitches,...
What Parts are Needed to Flat Tow a 1999 Chevy S-10 Pickup Behind a Motorhome
How do you hook up to the tow bar? May I please see the instructions and illustrations for the bar. And what kind of tow bar works with this? What is the weight limit? Does it come with safety cables and all needed hardware? We have a 1999...
Can a 1997 Chevy S-10 4x4 Be Flat-Towed
Can a 1997 Chevrolet s10 4wheel Dr be towed behind a MH. | Yes, a 1997 Chevy S-10 4x4 can be flat-towed behind a motorhome with all four wheels down. However, you will need to either disconnect the drive shaft each time or get a drive shaft...
Parts Needed to Flat Tow a 2003 Chevy S-10 ZR2 Behind an RV
flat towing a zr2 s10 2003 cant find a baseplate or adapters | I spoke with my contact over at Blue Ox and he said that # BX1616 base plates are the ones that you can use for your 2003 Chevy S-10 ZR2 and you should be good to go. For a compatible...
Will The MORryde MR34AR Shock Absorbing Equalizers Fit A 2021 Vengeance Rogue Armored 4007
We have a 2021 Vengeance Rogue Armored 4007 with lippert 7000lb axles. I want to upgrade the suspension with equalizers and a shackle wet bolt kit. There are so many different choices for equalizers. Are there pros and cons for each? Which...
Towing Mirror Recommendation for a 2003 Chevy S-10
Looking for slip on mirrors to fit 2003 S10 SR5 Crew cab. I havent been able to find any. | For your truck we have mirrors that will work, but at this time we do not have any custom fit towing mirrors. I recommend the K Source Universal Clip-On...
Trailer Hitch Fit for 1998 Chevy S-10 Truck
Im looking for a trailer hitch that fits a 1998 Chevrolet s10. | The correct hitch will depend on which bumper your S-10 is equipped with. For a factory step bumper, I'd recommend the Curt # C13132. For a roll pan bumper, you'll want to use...
Recommended Trailer Hitch for 1997 Chevy S10 ZR2 Pickup
Hi, Im looking for a hitch that fits my s10 4x4 1997 regular cab zr2 could you help me? | For your 1997 Chevrolet S-10 Pickup ZR2 model, I recommend the Draw-Tite Class III Max Frame Receiver Hitch # 75051. This Class III hitch is confirmed...
How to Wire Third Brake Light on Camper Shell
Looking to wire my camper shell third brake light tou 1989 S10 pick up ext cab. Do you carry a logic module for this type of hook up. Thanks | Yes we do have a logic module that will work to wire your third brake light on your camper shell,...
Correct Replacement Cover for Extang Lo Pro Tonneau 8560 on 1998 Chevy S-10 6' Bed
Looking for a replacement tonneau cover. My cover is an Extang EXG-8560 1998 Chevy S10 6 foot bed Thanks | I spoke with Extang about the Extang Lo Pro Tonneau 8560 on your 1998 Chevrolet S-10 Pickup with 6' Bed and they informed me that you...
Is the Optronics 25 Ft 4-Way Trailer Wiring Harness Going to Last Long
It seems that all the wiring kits I have bought never lasted long, I have wired my trailer 3 different times, the kits have been made in China. I have looked at the 25ft Y wiring kit that u have and want your opinion of if this is what I need....
Blue Ox Base Plate Kit - Fixed Arms for 2001 Chevrolet S-10 Pickup
does this fit the above 2x2 LS 2.2L engine? | The # BX1633 is for bigger trucks like a 1500 but the Blue Ox Base Plate Kit - Fixed Arms Item # BX1625 is the confirmed fit from the manufacturer for your vehicle. |
Can 2000 Chevrolet S-10 Extreme Pickup Be Flat-Towed
What parts will I need to tow a 2000 s-10 p/u extreme on all 4 with a stowmaster 5000 tow bar ie wiring harness base plates | I did some research and found that the manual for the 2000 Chevrolet S-10 pickup states that the vehicle is not to...
What is a Roll Ban Bumper when Looking at Trailer Hitch Fits for a 1989 Chevy S-10
Looking at your trailer hitches for my 89 S-10. It says will not fit vehicles with roll pan bumpers. What does that mean. | If you take a look at the picture I have included the truck in it has a type of roll pan bumper. Essentially it is...
Does the Westin Fey Bumper # 66001-97200 Come with a Hole to Access the Spare Tire?
Please verify that this bumper has a hole left of the license plate area to access the spare tire hanger for lowering. Thank you | I have an answer for you. Unfortunately, our installation team here at etrailer confirmed that the Westin Fey...
What Snow Tire Chains Do You Recommend For My 205/75-14 Sized Tires
I need 205 75 14 chains, what size would work? 75 isnt one of the options. | The Titan Chain Snow Tire Chains - Ladder Pattern - Twist Links - 1 Pair, part # TC1134, is a Class S compatible snow tire chain that is compatible with your 205/75-14...
Trailer Hitch Receiver Compatible With 1992 GMC Sonoma Short Bed
I have a 92 Sonoma 2dr rear drive, why wont this fit my short bed truck? | The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13132 will fit your 1992 GMC Sonoma truck as long as you have a factory step bumper. It will require...
Ladder Rack Recommendation for 2001 Chevy S-10 for Carrying 2 Kayaks
Hello! I have a 2001 Chevy S-10 2-door Pick-up with a 6foot bed with spray-on x-liner and a naked roof. I am looking for an over-the-bed rack system to hold two 12foot kayaks weighing 40-50 lbs each. I would like to still have access to the...
Truxedo Edge Header Stop For Chevy S-10
Hello i have a 2003 s10 zr5 with a 6 bed. And it came with the truxedo cover and I wanted to know it this would work on my cover, and if i could get seals not sure of the model# or where to find it. | Could you get me pictures of your tonneau...
Left Brake Light Does Not Work On Boat Trailer Connected To 2004 Chevy S-10 With Flat 4-Pin
Hi- I have a 2004 Chevy S-10 4x4 with a flat 4 pin connector. On my boat trailer, going through light checks, everything works- turn signals, running lights, except when brakes are applied, only the right brakelight comes on and the left will...
Is the Roadmaster Tracker Tow Bar Compatibile with Standard Base Plate 161-2 for a 1998 Chevy S10
had a 1996 geo tracker with 118-1 base plates and the tracker tow bar, now have a 1998 chevy s10 i think i need the 161-2 base plates can i use the tracker bar from the geo | Yes, the Tracker Tow Bar, part # RM-020 that you use with your Geo...
Filter Your Search
Contact and Help