Parts Needed to Install 7-way and 4-Way Connector in 2001 Ford F-350
I am looking for a tow package wiring harness for my 2001 Ford F-350 V10. I found the Ford Replacement OEM Tow Package Wiring Harness, 7-Way Super Duty with code 118243 which has the correct connection but I was wondering if you have one that...
Weight Distribution Recommendation for 37 foot Forest River XLR 29KW Toy Hauler
Im buying a 37ft Forrest River XLR 29kw toy hauler with a hitch weight of 1515lbs. Im going to be pulling it with a 2016 F250 6.7 Powerstroke class 5 with 2 1/2 reciever. Not sure what all the weights will be loaded down and Im going to pick...
Is the Replacement Hub Clamp Bolt # ERT052 Stainless Steel
Are these stainless | Yes, the Replacement Hub Clamp Bolt # ERT052 is stainless steel. |
RV Propane T-Fitting to Run Stove and Grill at the Same Time
Hi, I just purchased a 5th wheel with a LP line to the rear outdoor kitchen, which has a female quick disconnect on it. Whats the best way to run 2 appliances, each with their own regular. I dont see a dual outlet male /2 female QD tee on...
Which Way Should the Kingpin Coupler Block Face on the Andersen Ultimate Part # AM3200
I have a Ford SD swb, should the block be facing forward or back?wards | The orientation of the kingpin coupler block that comes with the Andersen Ultimate Connection 5th Wheel Trailer Hitch System with Adapter part # AM3200 will depend on which...
Troubleshooting Trailer Brakes that Lock Up When Brakes are Touched
I have installed your 10inch electric brake kit with new drums. No matter how low the brake controller is set the brakes on the trailer lock up as soon as the truck pedal is pushed. I have installed trailer brakes many times and have never...
Will The MORryde MR34AR Shock Absorbing Equalizers Fit A 2021 Vengeance Rogue Armored 4007
We have a 2021 Vengeance Rogue Armored 4007 with lippert 7000lb axles. I want to upgrade the suspension with equalizers and a shackle wet bolt kit. There are so many different choices for equalizers. Are there pros and cons for each? Which...
Front Axle Suspension Kit to Reduce Impact on Factory Jounce Spring on 2014 Ford F-250
I have a Ford F 250 2014 4 wheel drive I do not have equipment on the front I do pull about 5000 pounds on the back I am installing Firestone ride-rite on the back I Drive over speed bumps to leave and come home every day I want to install these...
Will a Reese Weight Distribution Shank Work with a Curt Weight Distribution System
I currently have Curt part #17300 and need more of a drop than the current shank will allow. I was wondering if this shank was compatible with part #C17307 that I have with my current setup. | The Reese weight distribution shank # RP54970 has...
Compatibility of Wheel Masters Airless Inflation Kit # WM80092 with Tire Pressure Monitoring Systems
Is it possible to use a TPMS sensor on this? If not, do you have another solution? | According to my contact at Wheel Masters, the 80092 wouldn't be compatible with TPMS systems, because there's no air in the tube. Using a regular extension...
Why Are Service Body Trailer Hitches Not Rated for Weight Distribution Systems
I recently purchases a draw tite ultra frame service body trailer hitch v-2inch weld on rated for 16,000 and 1600 and I need a weight distribution hitch for my trailer. I noticed after installing that the instructions say not for weight distribution...
Troubleshooting No 12V Power on 7-way Wiring on 2000 Ford F-350
What need to do get 12v working. No 12v on my plug ford 2000 f350 just added fifth wheel wiring kit | If the 12V power circuit on your original bumper-mounted 7-way trailer socket on your F-350 worked before you installed the 5th wheel harness...
Is there a Difference Between Part Numbers CAB-C5G and C5G1216
What is the difference in the CAB-C5G Convert-A-Ball Cushioned 5th-Wheel-to-Gooseneck Adapter - 12inch to 16inch Tall - 20,000 lbs and the C5G1216 Convert-A-Ball Adjustable Fifth-Wheel-to-Gooseneck Coupler Adapter - 12inch to 16 | There is...
Disc Brake Kit Availability Compatible with the Dexstar Conventional Steel Wheel # AM20766
I am looking for a rotor/caliper combination that works with the AM20766 wheel. What truck or trailer disc brake setup works with this wheel? | The Dexstar Conventional Steel Wheel # AM20766 has an 8 on 6-1/2 inch bolt pattern. To see a list...
Vent Cover Availability for Older Trailer
I cant find a ventline elixir vent cover with the same hing. It has gaps in it. not solid and the ones that have gaps are in a different place. It is on a 1989 chinook motor home that I am in the process of restoring. | Check out the picture...
7-Way Trailer Wiring Recommendation for a 1999 Ford F-250
your part number 20119 is supposed to fit a 1999 ford f250. the plug that connects to the oem harness does not at all look the same in the video as the original. mine is square wit rounded corners and has different sizes and lenght pins in it....
Best Way to Use Two Different Weight Distribution Systems for Different Weight Trailers
The tongue weight of a TT toy hauler I plan on buying will be in the 10K-13K range max 14K. I am looking at the RP66130. Prefer cams over friction pads. Assuming the RP66130 is a good choice, here is my real question. I also want to tow...
Are Spacers Needed to Install Timbrens on Vehicle with Leveling Kit
For a 2004 F250- I am looking to purchase a set of timbrens part # TFR250SDE. My truck rear wheel well measures out at 44.5. In the video on your website the f250 measures out at 40.75. My truck has a leveling kit on it and I want to make...
Roof Rack Recommendation for a 2015 Scion xB
I have a 2015 scion xb i been looking for permanent custom mount roof rack system i seen the thule and yakima permanent rack system which both of them used flare nut do u think the rhino will be work on metal roof thanks | I would strongly...
Trailer Tire Recommendation to Replace Size ST235/80R16
I currently have the following tires on my 44 ft fifth wheel toy hauler. Westlake -ST235/80R16E I have three axles rated at 7000 lbs each. I want to replace them with tires at least as good or better. What do you reccomend? Thanks, | I really...
Options for Correcting Sag on 2010 Ford F-350 Hauling 48 FT Haulmark Gooseneck Trailer
I have a 2010 Ford F-350 DRW Crew Cab 4x4 that I haul a 48ft Haulmark enclosed gooseneck trailer. My question is when hooked up my rear axle weight is is anywhere from 8,000-8,900lbs and all though ive never measured it ive noticed that my...
Trailer Rim and ST215/75R14 Taskmaster Tire Recommendation
I am in search of a couple of spares... I need to know if I can deviate on one of them. I would really like to get a Taskmaster ST215/75R14 LR C on a silver mod rim 5 on 4 1/2 bolt pattern. Your site only shows white.... | Check out the Provider...
Fit of Brophy Camper Tie-Downs HSSF on 2002 Ford F-350 Crew Cab Long-Bed Diesel
Can your camper tie down brackets hold a 11.5 ft camper well on a 2002 F 350 crew cab long bed. 4wd.? Diesel. I am looking at purchasing this camper. I would appreciate the correct part numbers for this size camper. Thank you very much. | You...
Recommended Hitch Receiver Reducer for 2017 Ford F-250 with 3 Inch Hitch to Blue Ox Sway Pro System
Hello. I just realized last night I forgot to put the pin in the factory F250 reducer sleave and lost it somewhere on the road. Im looking for a replacement, that would reduce it from the 3inch receiver and fit my Blue Ox Sway pro system....
Filter Your Search
Contact and Help