Underbed Installation Kit and 5th Wheel Hitch for a 1989 Ford F-250 w/ 8' Bed
I have a 1989 Ford F250 Super Cab 3/4 T 4x4 8 ft bed with lift springs. I have a 2001 Keystone Springdale 242 RL 5th wheel trailer GVWR 7880 lbs. What hitch is recommended with below bed rails? | The only 5th wheel hitch that we have that...
How to Wire in an Electric Trailer Brake Controller Pulse Preventer
I have a 1986 Ford f350. I spliced into the cold side of the brake switch, keeping the original brake wire traveling to the brake lights. So now.... Question Do I conect the Yellow wire to the cold side brake wire. and the brown wire to the...
Stromberg Carlson 100 Series 5th Wheel Tailgate for a 1989 Ford F-250
Will this tailgate fit a 1989 F250? | For your 1989 Ford F-250 you want to use the Stromberg Carlson 100 Series 5th Wheel Tailgate # VG-100 instead of part # VG-97-100 as the part that you referenced fits newer models Ford pickups. Attached...
Recommended Rear Suspension Enhancement For 1990 Ford F-250 W/ Curt Gooseneck Hitch
I have a 1990 F-250 HD standard cab with the overload springs and a curt hide-a-ball gooseneck. Will there be any installation issues or special mods needed for me to add this airbag system or a different one to my truck? My trailer grosses...
Converting An Inverted Fifth Wheel Trailer Hitch To Gooseneck Hitch
I just redid a 2001 Adam stock trailer thats a goose neck, I just picked up an 89 F250 with a pop up kingpin hitch in it. My question is, can I out the goose neck tube on the trailer for an inverted 5th setup on the trailer? I know you can...
Replacement Tarp for Replacement Tarp for Extang BlackMax Tonneau Cover on 1987 Ford F-150 Long Bed
Which one for 1987 f150 8ft bed with snaps? | I assume you have are asking about an Extang tonneau cover on your 1987 Ford F-150 with an 8 foot bed, and the one that snaps on is the Extang BlackMax Soft Tonneau Cover - Snap On 2515. So long...
Will the Pollak 5th Wheel / Gooseneck T-Connector with 7-Pole Fit the 1986 F 350 Super Cab
The wireing is already ford standard for a pull trailer. Looks like a nice design. | If your 1986 F-350 has the round style plug that attaches the vehicle wiring to the 7-Way connector on the rear of the truck, like the one on the Tow Ready...
Will The Furrion Vision S RV Camera System Work With A Trailer Pre-Wired For A Furrion System?
Hello. I am always appreciative of the wisdom from the experts on your website. I have a 2017 F-150 XLT 2.7 EB with the 302A package and the standard tow package. I just bought a 16 foot camper weighing 2500 pounds dry weight. This is a little...
Replacement Vent Cover for 1998 Winnebago Minnie Winnie RV with Continuous Hinge
Do you have replacement cover continuous hinge . Inside dimensions141/2×141/2, outside 15×15 | I do have replacement covers available if your roof vent has a continuous hinge. If you are looking for a smoke vent cover then you can use part #...
Does Tekonsha Voyager Manual Override Cause Brake Lights to Go On
When I engage the emergency brake on the brake controller should the brake lights come on on a 1991 Ford F350? | When using the manual override on the Tekonsha Voyager Trailer Brake Controller # 39510 the brake lights of your 1991 Ford F-350...
Are Buyers Products Parts Made in the USA
Is this one made in the USA? If not do you sell a comparable one made in the US? Can you give me a list of any other pintle hitches you sell with the same bolt pattern as this one? Thanks | I'm happy to inform you that all Buyers Products engineering,...
Does Pro Series 5K Square Drop Leg Trailer Jack Get Welded Directly to the Trailer Frame
I do not see any type of weld plate in the pics. Do you just weld the square channel of the jack to the frame or is there a plate? Thanks | For Pro Series square drop leg trailer jack # PS1400850383 you will just weld the outer square tube to...
Drill Bits Required for Installing Curt Class V Hitch C15300
I am installing a c15300 hitch on my 1989 ford f 250. I have to drill holes to install. What type of bit should I use. | To install the Curt Class V XD Trailer Hitch Receiver # C15300 on your 1989 Ford F-250 you will need two sizes of drill...
B and W Fifth Wheel Towing Setup Recommend for 1991 Ford F250 XLT Lariat
looking at this to fit a 37 1/2inch in outside to outside from measurement . I also want to make sure the companion fifth wheel will also work on this setup. I had a crude setup for a fifth wheel which was just a 1/2 plate steel with a ball...
Trailer Hitch Recommendation for a 1986 Ford F-150
I have a 1986 ford F-150 short box pick-up which hitch would be the correct one for my make and model.? | The most popular trailer hitch for your 1986 Ford F-150 is # C15300 if it is a regular pick-up truck model, not a cab and chassis, and...
Class V Trailer Hitch, Weight Distribution, Brake Control for 1988 Ford F-250 Towing 10K Trailer
I have a 1988 Ford F-250 HD with a 35 gallon tank where the original 19 gallon and spare tire used to be... Im going to pull a 28 ft race car trailer with a 10000 GVW. Im a belt and suspenders kind of guy so rather than be at the max of a IV...
How Many Hours will the Vision X 9004 Halogen Headlight Bulbs # VX-L9004 Last
I heard you all say in the video that the bulb will only last 250 hours. Is that correct? Ive seen other halogen bulbs that last 10x as long, 2000 hours. | I spoke to my contact at Vision X and he informed me that the Vision X 9004 Halogen...
How To Determine Fit of the Derale Fan Spacer Kit for Belt-Driven Fans On a 1987 Ford F-150
will your 3.5 cooling fan spacer fit my 1987 f150 5. 0 | I do have a way for you to confirm fit of the Derale Fan Spacer Kit for Belt-Driven Fans part # D31551 but I do not have any way to do this for you. Therefore, you will need to make sure...
Class V Trailer Hitch Recommendation for 1990 Ford F-250
Hello I have a 90 f250 8800gvrw. Right now it has a class III . I need to upgrade to a class V. I am looking at the curt and the bandw. I know both are made in USA. Both carry lifetime warranty. The Curt is a solid welded assy. The BandW...
Class III Hitch Receiver Recommendation for 1987 Ford F-150 with 37-1/4 Inch Frame
Hi, I see that the Curt #14001 will fit a 1987 F150 with ~37-1/4inch frame width. However it is a Class IV which is a bit overkill for an old F150. Is there a Class III Curt receiver or other USA made brand that will fit this truck and frame...
Which Husky Bracket Kit Do I Need to Install Fifth Wheel Trailer Hitch Bed Rails on 1990 Ford F-350
I have a 1990 F350 xlt lariat with 8ft bed. I have the bed rails but what bolts aND hardware do I need to install it? | The hardware for a Husky fifth wheel hitch on your 1990 Ford F-350 will depend on the type of rails you have. If you have...
How to Tow a Trailer that has a 5-Way Trailer Connector with 1984 Ford F-250 that has a 4-Way
I have inherited a 1984 F250 supercab. My dad installed a 4-flat harness on it. I am buying a new boat with a 5 flat harness and surge breaks. What products do I need to buy? What will I need to do with the existing 4 wires for the 4-flat?...
Parts Needed to Tow Horse Trailer Behind Truck with Truck Bed Camper Extending 41 Past Bumper
I have a 1988 F350 crew cab dually with a 7.3l diesel and a Lance camper that measures 41inch from receiver to camper bumper. Id like to tow a dual axel 3 horse trailer with Ebrakes the weights 4,200 lbs empty horses weight around 1000 lbs Please...
Recommended In-Bed 7-Way for a 1988 Ford F-350
I have a 1988 Ford F350 that is equipped with a factory tow package wiring plug. I am looking to purchase a 7 way pigtail that would plug in to the factory tow package plug and then have the 7way receptacle to mount in the truck bed on the other...
Filter Your Search
Contact and Help