Will the Stay-IN-Play Work On a 2004 Pontiac Vibe With Brake Booster Behind Firewall
I have been studying the installation instructions and various youtube videos for installing the Demco stay and play breaking system DM86VR on my 2004 Pontiac Vibe. On your website It is confirmed to fit this car which is basically like a Toyota...
Comparing the Swagman XC and XTC-2 Platform Trailer Hitch Mount Bike Racks on a 2004 Pontiac Vibe
Hi- What are the differences between the Swagman XC2 and XTC-2 bike racks? We have two 30 lb dual suspension mountain bikes with tires that are almost exactly 2.5 in. wide. I am leaning toward the XC2 b/c of the tire width, but am not sure if...
Propane Tank Cover for 20 lb RV Propane Tanks
I was originally looking for a 20# double rv propane tank cover. After a few searches it seems they are rare. Any thoughts are appreciated. Thx | The # CAM40532 propane tank cover will work with a pair of either a 20-lb or a 30-lb steel propane...
Hitch and T-Connector Wiring Recommendation for a 2004 Pontiac Vibe
What Draw-Tite part number is best for 2004 Pontiac Vibe and what T-split wiring package is available? | The Draw-Tite trailer hitch that will fit your 2004 Pontiac Vibe is # 24812. The T-one Flat Trailer Wiring for your vehicle is the Tow...
Blue Ox Parts Needed to Flat Tow 2009 Pontiac Vibe
Towing a 2009 Pontiac Vibe 4 down with a Blue Ox | For a base plate kit for your 2009 Pontiac Vibe you would want the part # BX3779. Then for a tow bar the most popular option is the part # BX7380 which comes with safety cables. For lighting...
Will the Yakima RocketBox Pro 14 Fit the Factory Crossbars on my 2004 Pontiac Vibe
I just want to make sure that this box will fit my car. I have a 2004 Pontiac Vibe. It has the factory rack that runs parallel with the vehicle plus the two the run cross ways, they are able to be moved around. They are not raised up and...
What Trailer Hitch And Hanging Bike Rack Will Work On a 2009 Pontiac Vibe
I want to put a trailer hitch on my Pontiac Vibe in order to put a hanging bike rack. Can you suggest both a trailer hitch and a hanging bike rack that would work together? 2009 pontiac vibe | You will want to check your owners manual or with...
Lid Supports that Fit Yakima Skybox Carbonite 16
Hi, I have a Carbonite Skybox 16 and am in need of the three latches that are fastened along one side of the top lid. I understand that I will have to drill out the existing rivets and use nuts and bolts to refasten the three latches. I also...
Is 2006 Pontiac Vibe FWD Automatic Transmission Flat Towable
Can I flat tow this vehicle without tearing the transmission up? | According to my research, your best bet would be to use a Tow Dolly like # RM-2050-1, but ONLY if your Vibe is equipped with the U341E automatic transmission, it can be towed...
Can RockyMounts HighNoon FC Solo Bike Rack Carry Bike with Flat Front Tire
I have a RockyMounts HighNoon FC Solo bike rack. My fat bike has a flat tire on the front and I want to haul it to the bike shop. Can I haul this bike with a front flat tire on this rack? Will it come loose on the highway? | The RockyMounts...
My Draw Bar Will Not Fit All the Way Inside My Draw-Tite Hitch 24812 on my Pontiac Vibe
I recently bought a Draw-Tite hitch #24812 for my Pontiac Vibe. Today, when I attempted to use my drawbar, I found the shank wouldnt go all the way into the receiver, because of a stop in the side. I was told by Draw-Tite that this is intentional,...
Does Conical Washer 01292-008 Fit Curt Hitch that Fits 2007 Pontiac Vibe
Will your 1/2 inch conical toothed washer fit the 12 mm bolt for my Curt trailer hitch on my 2007 Pontiac Vibe? Thank you. | Yes the Reese conical washer part # 01292-008 will work with the install hardware of the Curt hitch # C12221 that fits...
Trailer Hitch and Wiring for a 2000 Honda S2000
Do you have an installation manual for the hitch its a 2000 honda s2000 | Yes, installation instructions for Curt trailer hitch # C11212 (no longer available) are linked on its product page, right hand side of the page. I have also included...
Availability of Side Marker Lens For Wesbar Light That Uses Wesbar Red Square Lens #3335
I am looking to replace the lenses on my Wesbar trailer lights. I found the main big tail light lens on your site... its Lens #3335, But I cant find the small side lens that goes on the same fixture... its size is 2 and 13/16 by 2 and 1/8 inches....
Do Bolts Need to Be Fished Into The Frame To Install Draw-Tite 24812 Hitch on 2009 Pontiac Vibe
Will I need to thread anything in the frame before I bolt the trailer hitch on? If so what kind do I need. | You won't need to fish any fasteners into the vehicle frame to install the Draw-Tite # 24812 Class I hitch on a 2009 Pontiac Vibe. The...
What Draw Bar Fits Draw-Tite Class I Hitch Part # 24812
I have 3 - 1 1/2 drawbars. How can I tell if they will fit in the #24812 hitch? Is there a measurement of the pin hole location for this hitch? | The Draw-Tite Class I hitch you were looking at, part # 24812 uses a 1-1/4 inch receiver. A class...
Why is Draw-Tite Hitch a Class I and Curt Hitch is a Class II for a 2006 Pontiac Vibe
Draw Tite is classified as class I and Curt is classified as class II. When I look at the specs they have matching specs: 200lbs tongue weight and 2000lbs towing. What makes the Curt a class II and it only bolts with 4 bolts? Draw Tite...
Can 2005 Pontiac Vibe Be Flat Towed Behind Motorhome
Besides tow bars, light and braking packages from E trailer, would a 2005 Pontiac Vibe need a transmission pump for flat towing? | I checked the online owner's manual for the 2005 Pontiac Vibe on the GM website and it shows that the front-wheel-drive...
Gear Ratio and Minimum Load of Dutton-Lainson # DL11002 Worm Gear Hand Winch
What is the gear ratio for this winch DL11002? Also, Is there a minimum load required? Thank you! | The Dutton-Lainson # DL11002 winch you referenced has no minimum load requirements, and has a 40:1 gear ratio. |
Does Tow Ready Custom Vehicle Wiring # 118458 Require a Battery Connection, 2003 Pontiac Vibe GT
I have an 03 Vibe GT. Does this particular harness need power run directly from the battery? if so, is all cable included? | The Tow Ready Custom Fit Vehicle Wiring, # 118458, does not require a direct connection to the battery when installing...
Is Installation Hardware Included with Curt Class II Receiver Hitch Part # 12234
Does this come with the 1.25 mm x 30mm mounting bolts described in the installation instructions? | The Curt Class II Receiver Hitch, part # 12234 includes all hardware necessary for installing the hitch. All hardware described or listed in...
Draw Tite or Curt Hitch that Fits 2008 Pontiac Vibe
Is the drawtite hitch a better fit than the curt hitch? Does the drawtite hitch stick out far enough past the bumper to facilitate a bicycle hitch rack? Thanks | Hey Paul, I do like the Draw Tite part # 24812 that fits your 2008 Pontiac Vibe...
Trailer Hitch Receiver for 2003 Pontiac Vibe is Touching Muffler
I recently purchased a Curt hitch from you for my Pontiac Vibe. I left very good reviews because it did install very easily. I did not read all the reviews but Im going to have to make some modifications because the muffler is vibrating against...
Troubleshooting 4-Way Trailer Wiring on 32003 Pontiac Vibe
I have a 2003 Pontiac Vibe with a Curt 55057 circuit protector. The wiring installation was by a pro shop 15 years ago and worked well for years. The right turn signal does not work. Bulb good. Cannot find any wiring shorts or discontinuity....
Filter Your Search
Contact and Help