bing tracking image

Rondo  x   >   Rav4  x   >   Rabbit  x   >   Mark LT  x   >  

Brake Controller Showing Overload Error Code

I have a 2006 Lincoln Mark LTsame as a Ford F150 with a 5.4 L engine and I tow a 7000 lb trailer. I have a Reese Brakeman Digital and a Draw-Tite ActivatorII brake controller. I doesnt matter which one is hooked up they both advise of an...

Thule Spare Me Rack on 2010 Rav4 with Back Up Camera

I see that I cannot use a Thule Spare Me 2 bike carrier if I have a backup camera on my 2010 Rav4. Why? What are the alternatives? I can live without the camera for a short term. Thanks! | I spoke with the folks at Thule regarding the spare...

Finding Installer for Curt Hitch on 2009 Kia Rondo

A Curt Trailer Hitch Receiver for a Kia rondo 2009 what car brands aré compatible to install the tráiler Hitch | Hey Adrian, I attached a link to an installer locater that you can use to find someone to install the Curt hitch part # C11031 on...

Soft Roll Up Tonneau Cover For 2006 Lincoln Mark LT Truck

I HAVE A 2006 LINCOLN MARK LT ITS GOT A OLD TRUXEDO COVER ON IT NOW BUT I CAN NOT FIND A PART NUMBER ON IT.IT IS A SOFT ROLL UP TYPE. I WOULD LIKE TO REPLACE IT BUT I NEED HAVE EXCESS TO MY STAKE HOLES ITS GOT A 5.5 FOOT BED ON IT. | Hello Richard....

Parts Needed to Add Brakes to 1992 Coleman Arcadia Pop-Up Camper

I want to add brakes to my 92 Coleman Arcadia pop-up. I am looking for the correct hub/drum and electric brake assemblies. The wheel bolts are 5 on 4 1/2 and the tires are Carlisle USA Trail 20.5x8-10. The current axle includes a square flange...

Weight Of The MORryde 20"x48" And 20"x60" Sliding Trays For RV Cargo Compartments

20x48 and 20 x 60 steel cargo tray How much do these weigh each ? thx | The MORryde Sliding Tray for RV Cargo Compartment - 48" x 20" - 800lbs - 1 Way Item # MR94FR weighs approximately 70lbs and the MORryde Sliding Tray for RV Cargo Compartment...

Replacement Jack For 2001 Stratos Bass Boat Trailer

I have a 2001 Stratos Bass boat with a Fulton center bolt swivel jack onto a welded plate on the trailer. I would like to upgrade to the Fulton F2. My holes on the plate are 3X3 on center. Will the F2 work? Can I send you picture? Thank You...

Does The GE Appliances RV Refrigerator GE58FR Come With A Mounting Bracket?

Does this with mounting brackets? | Hello Raymond, thanks for reaching out. The mounting brackets are not included with the GE Appliances RV Refrigerator # GE58FR. It requires a GE approved top bracket part BMT-GPV10. This is not something we...

Installation Instructions for Wiring a 2008 Volkswagen Rabbit to Tow a Trailer

My question is about the electical hook-up. Can I splice a 4-flat connector directly into the wiring harness, or do I need some kind of powered module dure to the fact that it6 haqs LED lights? | Due to the MX (Multi-Plexed) wiring system on...

Can 1,500 lb Trailer Axle be Swapped for 3,500 lb Axle

Good day I have a 10x7 utility trailer with 1500 lb axle with no brakes or brake flange. I was wondering if I could swap out the 1500 lb axle with a 3500 lb axle with electric brakes? The trailer frame seems to be made out of angle iron, not...

What is the Battery Life for Hopkins Wireless Magnetic Tow Lights

What is range of battery life for these lights? The check battery level indicator light every 2 hours statement has me concerned. I drive for much longer stretches than that and dont wish to carry excessive spare AAs or replace them every couple...

Why is a Stabilizing Strap Recommended on Curt Hitches and what is Meant by Non-Trailer Load

What is meant by stabilizing straps for non-trailer loads? | Non-trailer loads are hitch accessories like bike racks and cargo carriers. Basically anything that is not a trailer that you could put on a hitch. Curt recommends you use a Curt Trailer...

Recommended Weight Distribution System For Prolite S Camping Trailer

Hi, my Prolite S camping trailer is @ 1600lb heavy, tongue weight is 200lb, what weight distribution you can recommended for me?? Plese ASAP. Thanks | For your Prolite S camping trailer, I recommend the Reese Steadi-Flex Weight Distribution...

Brake Controller Harness Connection Port Location on a 2006 Lincoln Mark LT

I have a 2006 Lincoln Mark LT I need to know the location of the factory harness to plug in the Brake controller. | If your 2006 Lincoln Mark LT is equipped with a factory 4-Way or 7-Way trailer wiring then the location of the brake controller...

How to Determine Axle Placement on a Custom 5 x 9 ATV and Motorcycle Trailer

Hi, I am building a 5x9 atv/ motorcycle trailer by emulating an 80s Cox 4x8. The axle was centered on the Cox and so assuming thats ok for the new one. I saw the math equasion shown here but its a little over my head, most small trailers I see...

Recommended Trailer Hitch Receiver for 2011 Kia Rondo

I am looking for a trailer hitch for my KIA Rondo 2011. Do you guys have anything for this models Thanks | For a trailer hitch that fits your 2011 Kia Rondo we have the Draw-Tite Trailer Hitch Receiver # 36525. This is a custom fit Class I...

What is the Weight of Hollywood Racks Sport Rider SE2 2-Bike Platform Rack # HR1450Z

How much does this bike rack weigh? We plan to use it with two different vehicles and ease of moving from one to another is important. We had the Thule Apex and it weighed 41#s which was OK. Does this weigh about the same? | The Hollywood...

Is Trimming of the Foam Absorber Required for the Curt Hitch On a 2010 Mini Cooper Convertible

have a question about hitch and hard form . I removed the bumper today for preparation for hitch installation. The bumper has the hard foam but it is wedge between the front and back metal bumper with a full metal back hard foam cannot be...

Parts Needed to Flat Tow a 2007 Lincoln Mark LT Behind an RV After Disconnect Drive Shafts

Can this truck be towed 4 flat? And if so..what products will I need to do so? Do I need a driveshaft disconnect device? | I checked the owner's manual for your 2007 Lincoln Mark LT and you can flat tow it but the front (on 4x4s) and rear drive...

Trailer Hitch Recommendation for a 2007 Kia Rondo

I am looking for a trailer hitch for a Kia Rondo that was manufactured in Dec, 2006. I dont see one in your listing earlier than 2007. Thank You | That is because you most likely have a model year 2007 Kia Rondo that happened to be built in...

How to Tell if the Yakima SkyBox NX 16 Will Fit a 2006 Toyota RAV4

Will this box fit my 2006 Rav-4? It has a factory rack and cross bars. | Here is how you can determine if the Yakima SkyBox NX 16 Rooftop Cargo Box, # Y95AV, will fit your 2006 Toyota RAV4 and allow your rear hatch to open. Measure the crossbar...

Class II and Class III Trailer Hitches for 2016 Toyota RAV4 Hybrid

I am purchasing a 2016 Toyota RAV4 Hybrid and would like to know if the gas RAV4 hitch will work on the hybrid model as well. Thank you. | We can offer you either a 1-1/4-inch Class II hitch # C12108 or a 2-inch Class III hitch # C13149 for...

How Much Does the Thule Hitching Post Pro Bike Rack Weigh

I am wondering how heavy the bike rack is before I order it. thanks - | The Thule Hitching Post Pro # TH934XTR has a shipping weight of 41 pounds. The rack itself, minus the packaging, weighs about 38 pounds. I have linked a video review of...

How to Prevent Exhaust Components from Contacting the Trailer Hitch

I purchased the replacement CURT trailer hitch hardware from eTrailer for this hitch and installed the 11074 on my 2009 4DR Rabbit. However - after install, I now experience a lot more noise at low RPMs. Theres vibration being transmitted back...

Filter Your Search