bing tracking image

Rav4  x   >   Motorhome Chassis  x   >   Rondo  x   >   Mariner  x   >  

Result:

Recommended Replacement Bushings for a Sway Bar On a 1997 Safari Continental

I have a 1997 safari continental. I am looking for sway bar end link bushings. | Shelton, from my research it appears that your 1997 Safari Continental has a Chevy P-Series chassis which would mean that you should have the Roadmaster Front...

Does Install of Triple LED Trailer Tail Light # 328-003-30LEM2 Require Diodes

Are the taillights I ordered Wire and Play so to speak or does a diode need to be added. Not that it matters much for this question but I am installing these on a Montana fifth wheel replacing the standard rectangular taillight you see on most...

Replacement for Xantrex XADC 8012 Converter Charger

I have an inverter/charger xantrex xadc 8012 in my motorhome. Do you sell a replacement? | Hello Vee; your Xantrex XADC 8012 is an 80 amp converter charger. For a replacement we have the Progressive Dynamics 9300 Series RV Converter Charger...

Thule Spare Me Rack on 2010 Rav4 with Back Up Camera

I see that I cannot use a Thule Spare Me 2 bike carrier if I have a backup camera on my 2010 Rav4. Why? What are the alternatives? I can live without the camera for a short term. Thanks! | I spoke with the folks at Thule regarding the spare...

Parts Needed to Tow Tent Trailer With 2011 Mercury Mariner

Hi! My tent trailer has a 7 pin plug. I am looking to install a hitch and proper wiring on a 2011 Mercury Mariner without trailer tow package. All I see are 4 pin kits. Do you have any suggestions??? Thanks! | The wiring you will need for your...

Finding Installer for Curt Hitch on 2009 Kia Rondo

A Curt Trailer Hitch Receiver for a Kia rondo 2009 what car brands aré compatible to install the tráiler Hitch | Hey Adrian, I attached a link to an installer locater that you can use to find someone to install the Curt hitch part # C11031 on...

Where to Connect Black Wire from Prodigy P2 Brak Controller

The black hot wire on the brake controller goes connected to always hot or to ignition? | Hey Rafael, The black wire for the Tekonsha Prodigy P2 Trailer Brake Controller # 90885 needs to be connected to a constant 12V power source. If your...

Wireless Brake Controller Recommendation for 40 Foot Motorhome

I have a 2000 country coach allure that I was wondering if you have a wireless brake controller. it is a RV forty feet long. we go places where there isent internet alot will that afect signal.? | Hey Joel, the Prodigy RF brake controller...

Recommended Replacement for a Magnetek Model 6325 Converter

Hi, I’m looking for a converter replacement for my 1986 Toyota dolphin. I read the thread and wanted to order a replacement for 6300 A model 6325 | It looks like there actually isn't a direct replacement for your Magnetek series 6300A Model...

How Are the Bearings in the Malone LowMax Trailer Greased and Re-Packed

How do you gtease the bearings and how often is this needed to prevent mishap on the road? | The Malone Low Max trailer has a removable hub, so you'll be able to pull it to access and remove the bearings; we've actually done a helpful video...

Parts Needed to Add Brakes to 1992 Coleman Arcadia Pop-Up Camper

I want to add brakes to my 92 Coleman Arcadia pop-up. I am looking for the correct hub/drum and electric brake assemblies. The wheel bolts are 5 on 4 1/2 and the tires are Carlisle USA Trail 20.5x8-10. The current axle includes a square flange...

How to Clean Out a Freshwater Tank and Lines on an RV or Trailer

How to clean out the fresh water tank for use. | It depends on the type of freshwater system you have in your RV or trailer. There is likely a specific procedure outlined in the literature for the RV/trailer that you will need to follow. If...

Replacement LCI RV Step Module for 164889

I need a LCI step control module part #164989 Bar code 11675a2772100841 This is for a 2006 Monaco Camelot door step. Do you have anything that will work. | Is it possible the module number is 164889? That cross referenced with our part # LC301702...

Which Breakers Work w/ the Progressive Dynamics 4100 Series RV Converter PD4135K?

Hi I recently purchased a PD4135 AC DC Distribution Panel from etrader I went to fit it but there are no breakers supplied , so I need your help to find the correct breakers for this plastic unit pref something that was made to mount to the...

Recommended Spare Tire Cover For A 4.80/4.00-8 Trailer Tire

Please recommend a spare tire cover that will fit one of these without flapping in the wind! | With the Taskmaster 4.80/4.00-8 Bias Trailer Tire # AM30000 having a diameter of 16.1 inches when fully inflated, we will not have a perfect fit for...

Replacement Motor Solution for Kwikee Series 32 RV Step with Motor 151332

Hello. Will the conversion kit #LC379145 work on a 3 step A series installed in a Damon Intruder? Gear box #151320 and motor #151332. Thank you very much | Thanks for all the info you gave on your step setup. We've had similar questions...

Differences Between the Voyager and P3 Brake Controller

Hi, I currently have a Tekonsha Voyager brake controller unit. I just purchased a new 15 Jeep Grand Cherokee and will need to install a new brake controller on that vehicle. Can you explain the main differences between the Voyager model and...

Air Bag Suspension Kit Needed for 1987 Toyota Dolphin Motorhome

Hello ,wanting an airbag for rear suspension on a 1987 toyota dolphin motorhome. | The only air bag suspension kit that is compatible with your 1987 Toyota Motorhome Chassis comes from Air Lift with the kit # AL88113. You might also be interested...

Air Lift Load Lifter Kit that Fits 1989 Toyota 1-Ton National RV Dolphin

1988 Toyota 1-ton chassis, dual rear wheels, VIN code ending with 3W. 1989 National RV Dolphin motorhome is mounted atop the Toyota 1-ton chassis. Will the AirLift air springs/bags kit #AL88113 fit in the above combination? Also, how long are...

Can Thule Hullavator Pro Fit on Square Malone Crossbars

Hi! I love this site!!! I want to purchase the Hullavator Pro, and I currently have 50” malone square crossbars on my ‘06 Mercury Mariner. Can my crossbars accommodate the Hullavator pro? Thank you! | Yes, the Thule Hullavator Pro # TH898 can...

Steering Stabilizer for 2004 Holiday Rambler Endeavor

Will this work on the 2004 Holiday Rambler endeavor | Since your 2004 Holiday Rambler Endeavor is on a Roadmaster Motorhome chassis you have two options for steering stabilizers. You have the part # RM-RBK8-RSSA for if you have leaf springs....

Replacement Module Recommendation for Power Gear Module 500457

I have a 2001 Holiday Rambler leveling jack controller pad is not working your video says your kit lc359259 will work on my #500457 leveling control witch I guess is obsolete i watched the video it says plug and play my controller has three...

Replacement Lens and Housing for 1991 Winnebago Micro Mini Warrior

I own a 1991 Winnebago Micro Mini Warrior RV. It sits on a Toyota 1-ton dually pickup chassis. I need to find replacement parts for the rear tail light housing including the housing, lenses and bulbs. The original Winnebago parts are as follows: Electrical...

Installing Trailer Wiring Harness in 2009 Mercury Mariner Without Factory Tow Package Wiring

My 2009 Mercury Mariner did not come with a hitch. However, it has the wiring adapter at the back of the vehicle. And, the power distribution box has the spaces for the three tow relays needed to power the wiring adapter. But, when I tried...

Filter Your Search