Result:

Can you get me a set of Optronics STL87 Smoke Series lights? The manufacture part number is - Polypack part no. STL87DSRSHBP | Hey Glen. We've got a couple of options for Optronics Smoke Series lights but we don't have the STL87DSRSHB which...

I have an Itasca Navion 2014 which has 7 running lights. I would like to change them out to new LED lights. They measure 3.75 inches in the longitudinal direction. The screw holes are about 2.75 inches apart. Can suggest a new product? Thanks,...

I am looking to upgrade the rear lights of my Car Mate 5x8foot utility trailer. I currently have Peterson PM444L lights. I am hoping to use the TLL16RK set however I am not sure if they will fit. The Petersons have the standard 2 inch center...

Where is this manufactured? | Hi Peter; Optronics does have some manufacturing facilities in the US but as far as I know the components included in the Optronics Trailer Light Kit # TL16RK come from their facility in Taiwan. |

I have the trailer lights wired through a conjunction box to a WesBarg 7-Way, RV-Style Connector w/ 6foot Long Coiled Cable - Trailer End - WG54006-043. the turn and brake lights work. the right side running lights work but not the left. | On...

Do you sell the Winnebago tail light assembly part number: 152070-01-000 or a cross referenced replacement? | While we do not have an exact replacement for the Winnebago tail light 152070-01-000 you may be able to fit the Fusion LED Hardwired...

I need a red marker light for the side of my 05 Gulf Stream Sun Voyager the part number on the lenses is SAE AP2 01 and is red? Any idea | The SAE number of a trailer light isn't always the best way to pick out a replacement light since that...

Will this fit a SAE AP2 01 replacement amber side maker lens for a 2007 Rockwood Freedom 1640 LTD tent trailer? | If your original light is 4" L x 2" W x 1-1/8" D then Optronics light # MC32AB will fit in its place. If you have different dimensions...

I have purchased a 2006 Ford Ranger Pickup which I want to flat tow behind my motorhome. Are there special brackets to mount on the pickup for the tow bar or are they universal mounts. I need to order a tow bar and brackets but I am not sure...

Hello, I have a camper and the receiver for the bunk light has a 5.5mm female connector but my bunk light/fan is a 1/4 in stereo jack. Is there an adapter or would I replace the existing Jacks? Thank you | We don't have an adapter, but...

What parts do I need? | If you haven't already the first thing you want to do is make sure your 2000 Ford Ranger can even be flat towed with all 4 wheels down behind a motorhome. From my research the 4-wheel drive model can as long as it's...

i know all of my trailer lights work. right now only the left blinker and brake light work. no running lights. the ground on the trailer is good. the problem has to be the ground in the truck itself but i can not find where the ground is hooked...

Looking for a complete LED submersible wiring kit for my 1991 ranger bass boat trailer. the kit would include 2 amber and one red LED on each side and sort of oval red brake/turn/tail lights and 2 small red rear lights as seen in the attached...

How can I attached Obtronics led license light to a pre-installed Curt aux led indicator lights, #5302? I have a hitch mounted cargo carry or is there a product that incorporates indicator lights and license plate light? | The Optronics LED...

Id like to upgrade my non- reflector trailer lights with your reflectors only. Are there any requirements as to how close these should be placed to the side marker lights? Thank you. | Trailer lighting requirements will vary depending on the...

base plates for a 2002 ford ranger super cab standard 4 wheel drive - can I use a front mount hitch to attach tow bar? | A front-mount hitch such as # C31063 cannot be used to flat tow a vehicle such as your 2002 Ford Ranger because you would...

The signal wire from the right turn signal is disconnect somewhere in the vechicle, so where does the green wire start from in the 2000 ford ranger? I put all new wiring harness on boat trailer and it still does not work. | If your 2000 Ford...

What gauge wire comes on the Optronics STL264RB? | The Fusion LED Combination Tail Light Bar for Trailers Over 80" Wide part # STL264RB comes with 18 gauge wires. If you need connectors for this, I recommend the Deka Heat Shrink Butt Connector...

I need to replace a Bargman part inch 30-93-xxx lens cover in the interior of my 2000 venture tent trailer. Will this part work? | The Replacement Lens for Arcon Euro Style LED Dome Light part # AR18017 is the replacement lens for Arcon Euro-style...

Every thing seem to go flawlessly seemed very simple but I now have no turn signal or brake likes just running lights on the trailer. Do you know what the heck might be wrong? | Optronics trailer tail light # ST5RB grounds through the mounting...

Do you have a kit that will work with a 1989 ford ranger? I want to set it up to be towed behind RV. | We can help you with the items you'll need to flat tow your 1989 Ford Ranger behind your motorhome. These include components like the tow...

I have a 2011 Ford Ranger with a 4 prong wiring harness. My boat has a 4 prong on it but 5 wires. All my turn signals work with running lights on and off. The brakes work with running lights off but not when the running lights are on | First,...

I have a 2002 Ford Ranger just put new wire harness and lights on my trailer but now neither lights work when I turn on the turn signal in the truck.I did check all the fuses in the cab of the truck,but the fuses under the hood you cant tell...

will these lights work on a 24 volt system? | For a similar light that can be used on a 24 volt system you would want the part # BUL23C24B, but the # BUL78C3MB that you referenced can only be used on a 12 volt system. |