Recommended Dual Electric Radiator Fan w/ Shroud for 1967 Chevy Chavelle
I have a 67 chevelle aluminum radiator bb 427 core dia 22-17 wanting electric fans and shroud to fit what I have also has long water pump I have 2 and five eights from pulley to core need something low profile?? | For your 1967 Chevelle I recommend...
Looking for Hitch Solution for 2004 Monaco Dynasty Coach
Morning Have a customer looking for a trailer hitch assembly for their 2004 Monaco Dynasty coach Diesel pusher The original hitch appears to have been cut off with a torch Any help on this would be greatly appreciated | Hey Bill, I wish...
Tow Bar for 1981 Volkswagen Rabbit Pickup
What tow bar will hook up to a Volkswagen rabbit truck bumper, I need one that is 31 inches | Hi Andrew; are you saying you need the arms to be 31" apart? The Curt Adjustable Tow Bar # C19745 you were looking at has an adjustable arm width from...
Trailer Hitch Receiver Recommendation for 1970 Chevrolet Chevelle
Hi, Do you carry a trailer hitch set up for a 1970 chevy chevelle? It would be nice to tow a small trailer. Thanks! | Although we do not have a custom fit hitch available for your 1970 Chevrolet Chevelle, I have a hitch that should work for...
Instructions and Minimum/Maximum Air Pressure for Air Lift Drag Bags on a 1968 Chevy Chevelle
I need instruction sheet. Also what is max. air pressure | The Air Lift Drag Bags for your 1968 Chevy Chevelle are # AL60844. The instructions are linked on the right hand side of the page for you (here and on the product page). The minimum...
Fit of Air Lift 1000 Drag Bags AL60844 on 1969 Chevrolet Chevelle
Hello, I have a 1969 Chevelle SS 396/375 4-spd car and have a couple questions. 1 Do these bags prevent wheel hop? 2 Can order these bags in a different color preferably Black? Thanks | The AirLift 1000 Drag Bags for Rear Coil Springs # AL60844...
Can the Air Lift 1000 Drag Bags Be Inflated Separately?
thanks, but i dont need a pump, i just want to put more air in the left side. a seperate shrader valve for each would be ok. | The Air Lift 1000 Drag Bags for Coil Springs item # AL60844 comes with everything you need to set the air bags up...
Powered Fans to Correct Cooling Issue with 427 Big Block in 1966 Chevrolet Chevelle SS
Have a 66 Chevelle SS with 450HP 427, auto trans, new 160 thermostat, and aluminum radiator and dual fan setup I believe to be by Champion. Just bought the car. Dont know the CFM of the fans, but they appear pretty small. The engine runs VERY...
Electric Radiator Fan Less Than 2-3/4" Wide for 1967 Chevrolet Chevelle SS
Hello, I have a 1967 Chevelle SS with a 496 BB. I have been having issues with overheating since I have added air conditioning, plus I live in Arizona where the temps are crazy hot. I do not have but roughly 2-3/4 to work with for depth as...
Wheel Net Recommendation for a Polaris RZR with 27x9R-14 Front Tires and 27x11R-14 Rear Tires
I have a 2012 RZR XP. It has 27-9R-14 in the front and 27-11R-14 in rear for tires. I have put the E-TRACK system on my trailer. I want to know if there is a tire strap that would work. | For your tires, I recommend going with the Erickson Wheel...
Replacement Exterior Folding Handrail for 2015 Grand Design 385TH Toy Hauler
we have a 2015 grand design momentum 385th toy hauler. will this fit where the one that is on there now looking at just taking it off and replaceing it with yours? it looks the same as ours, yours is just larger. It is mounted on the left...
Can the Deka Battery Isolator DW08770 Be Used On a Boat
can it be used in a boat where I have a starting battery and a separate battery for my accessories. | Yes, the Deka Battery Isolator part # DW08770 can be used on a boat to separate the starter and auxiliary battery but you would need to mount...
Winch Mount Recommendation for 2013 Polaris RZR-4 XP 900
What winch mount will work for my 2013 rzr xp 4 900? | We have the Bulldog Winch Mount part # BDW15167 which is a confirmed fit for your 2013 Polaris RXR-4 XP 900. You could use it with the part # BDW15001. |
MagnaFlow Exhaust Recommendations for a 1967 Chevelle Super Sport
Will this kit work on a 1967 Chevelle SS with a 502 BB? | According to MagnaFlow, the Stainless Steel Crossmember-Back Exhaust System, # MF15897, will fit your 1967 Chevelle SS. This kit is a cross member back exhaust kit. My contact at MagnaFlow...
Recommended Dual Path Air Compressor and Air Bags for a 1967 Chevelle
i may try some air bags on my 67 chevelle , do you know if i can get them to inflate individually? | If you use a dual path air compressor like the Air Lift Load Controller Compressor System item # AL25856 you will be able to inflate the Air...
Synthetic Rop Superwinch Terra 45 that Can Be Used with 2016 Polaris RZR XP 4 Turbo
Will this winch fit my 2016 Polaris RZR XP 4 turbo and can I get it with a synthetic rope? | We have the custom winch mount part # BDW15182 which is a fit for your 2016 Polaris RZR XP 4 turbo that you can then use with the synthetic rope Superwinch...
Winch Mount for Superwinch 3000 LT for 2011 Polaris RZR 900 XP
Will the winch mount #2202914 and Superwinch LT 3000 SW1130220 fit a 2011 Polaris Ranger RZR 900 XP without any modifications to the RZR? The list of models does not include the XP version. | For your 2011 Polaris Ranger RZR 900 XP the correct...
Airaid SynthaFlow Premium Air Filter for 2011 Polaris RZR XP900 ATV
I am thinking of buying an ATV air filter, code AR850-352. its for my 2011 RZR xp900 | Airaid Powersport SynthaFlow Direct-Fit Replacement Premium Oiled Air Filter # AR850-352 is a confirmed fit for your Polaris XP900. I suggest the cleaning...
Is It Normal For Replacement Pin Box To Measure Narrower Than Brackets on Trailer
In your description video you are calling out the width at 12. When our pin box arrived it is 11 13/16inch wide. This is 3/16inch narrower. The frame members where it attaches is a heavy 12, the 1621 HD pin box Im replacing is 12. Is it going...
Troubleshooting Manual Override that Won't Work to Lock Up Trailer Brakes
I replaced my old controller with the Tekonsha p 3 controller and I have a 2001 GMC Sierra 2500 hd. I have only tried it on my empty 18 foot car hauler but no matter what adjustments I make I cannot get the brakes to lock up to adjust them!...
Winch Mounting Plate that Fits 2016 Polaris RZR 1000 S
I have a 2017 Polaris 1000 S. Need mounting plate that fits warn 4000s about 6 1/2 inch spread. Anything? | For your 2016 Polaris RZR 1000 S the Bulldog Winch mount part # BDW15182 is a confirmed fit. This winch plate will work with a Warn 4000...
Filter Your Search
Contact and Help