Are Relays Needed to Activate Tow Package Wiring in 2012 Suzuki Equator
For the 2012 suzuki equator, I already have the 4 pin connector attached in the rear, but I dont recall installing a relay kit inside the truck. I havent had to use it yet, however in am picking up a new trailer during the week. I hooked a test...
Looking for Hitch Solution for 2004 Monaco Dynasty Coach
Morning Have a customer looking for a trailer hitch assembly for their 2004 Monaco Dynasty coach Diesel pusher The original hitch appears to have been cut off with a torch Any help on this would be greatly appreciated | Hey Bill, I wish...
Availability of Tire Chains for 17.5L-24 Tractor Tires for Kubota MX5100
hi do you have chains to fit my 17.5L-24 tractor tires? not sure how to use your search tool for this application - kubota MX5100 4wd thanks | Hi Glenn; we do have tire chains that for your 17.5L-25 tires on your Kubota MX5100. The search...
Tow Bar for 1981 Volkswagen Rabbit Pickup
What tow bar will hook up to a Volkswagen rabbit truck bumper, I need one that is 31 inches | Hi Andrew; are you saying you need the arms to be 31" apart? The Curt Adjustable Tow Bar # C19745 you were looking at has an adjustable arm width from...
Tire Chains for an ATV with 25x10x12 Tires
Are cable chains available for Kubota SUV... 25X10.00-12NHS | While we do not have cable chains for ATV 25x10x12 tires, we do have low-carbon steel V-bar chains for them. They are the Titan Chain ATV Snow Tire Chains - Ladder Pattern, part...
Troubleshooting Non-working Running Lights on a Trailer Being Pulled by a 2012 Suzuki Equator
2012 Suzuki equator 4wd. It has trailer oem trailer wiring and I plugged in the wiring harness from U-Haul but I do not have running lights. I have turn signals, emergency flashers and brake lights but no running lights. I have been using...
Curt Trailer Wiring Harness Recommendation for a 2011 Suzuki Equator
how can I tell if my suzuki equater will accept the118263 harness? I DONT KNOW IF IT HAS THE TOW PACKAGE. | The Curt Custom Fit Vehicle Wiring # 56087 that you referenced will work on your Suzuki Equator even if you do not have the tow package....
Comparing Curt Wiring Harnesses for a 2011 Suzuki Equator
2011 suzuki equator without trailer package. so my reading notes i would need the #56087 wiring harness. what is the different in #56087 and C56225 harness. thanks | The Curt trailer wiring harness, # C56225, works and installs more like the...
Best Compatible ATV Winch and Mounting Plate for a 2012 Kubota 900XT RTV
What model winch would you recommend for a Kubota 2012 900XT RTV, do I need to purchase a separate mounting plate? This would only be used occasionally. | Yes, you will need to purchase a separate mounting plate specifically designed for your...
Will The Torklift StableLoad # TLA7311 Work With An Air Bag Kit?
Will the StableLoad - A7311 work with air bags. If not is there any other equivalent options? | Yes, the Torklift StableLoad # TLA7311 will indeed work with an air bag kit. This is actually a combination we recommend fairly frequently as the...
Dimensions of Putco Tailgate Cap 51614P
what are the dementions of this part #p51614p I need length and width to make sure it fits | I reached out to the manufacturer and the Putco Tailgate Cap - Stainless Steel # P51614P measures 50.25 inches long. He didn't have a width and we...
Will the Curt Wiring Kit # 56087 fit on a 2011 Suzuki Equator without Tow Package
I would like to know if part #56087 will work on my 2011 Suzuki equator which I believe does not have a tow package. Ive attached a picture of what i believe is the connection and can you tell me if this is where it plugs into. want to make...
Does Factory Installed Transmission Cooler on 2011 Suzuki Equator Mean I Have Tow Package w/ Wiring
I have a 2011 suzuki equator nissan frontier, how do I know if the tow package is installed for towing lights? Do I need the relay package or just the adapter? I do have a factory installed transmission cooler, does this mean I have the tow...
Tap To Clean Weld Nuts Inside Frame On a Suzuki Equator
the holes in my frame are very rusty, I guess I need a12m x1.25 tap to clean them up. do you sell them? | Yes, we have the 12 mm x 1.25 Tap and Drill Bit part # PTW8662 which can be used to clean the weld nuts inside the frame when installing...
Troubleshooting Trailer Brakes that Lock Up when Trailer Wiring is Connected
Help. 7 way connector works well except it applies brakes as soon as it is plugged in 2012 Suzuki Equator sport 4 door 4wd Curt venturer trailer brake shows single green light when brake is touched or manual slide moved, whether trailer plugged...
Back Up Alert Recommendation for a 2010 Suzuki Equator with a # 921 Reverse Lamp Bulb
Will it fit my 2010 Suzuki Equator Nissan Frontier existing bulb #921 18vots | The Hopkins Backup Alert, # HM20101VA, is designed to replace a # 3156 bulb and will not replace the # 921 bulb on your 2010 Suzuki Equator. Instead, I would recommend...
Troubleshooting Trailer Brakes That Stay Locked Up
I have a 2009 Suzuki Equator Made by Nissan and I am having the same problem with the constant 12v going thru the blue wire. We did the switching of the blue and black wires but it seemed to not let me have brakes. My brake controller still...
Ball Mount Recommendations for a 2011 Suzuki Equator
which is the common ball mount for this truck. | The recommended ball mount for the hitches for the 2011 Suzuki Equator is a Ball Mount # AMSC2. The etrailer.com Ball Mount Kit # 989900 that you referenced includes the # AMSC2 as well as a...
What is the Length of the Suzuki Trailer Hopkins Wiring Harness part # HM43575?
How long is the wiring end to end on this item? Item # HM43575 | The Hopkins wiring harness item # HM43575 has a length of 45-1/4 inches for the wiring alone and the overall length including the plugs/adapters end to end is 48-1/8 inches. |
Trailer Brake Lights/Turn Signals Not Working when Connected to 2009 Suzuki Equator
I just bought the recommended wiring harness from etrailer for my pick up truck that included all the relays to match my pickup. I did the install and made sure everything snapped into place. When I hook up the trailer new trailer the running...
Parts Needed to Install 7 way Connector on 2009 Suzuki Equator
I have a 2009 Suzuki Equator 2wd 6cyl. Years ago I installed a 4pin trailer harness which included the harness that is installed in the passenger side panel. Im needing to install a 7pin adapter to pull an RV, do I need to replace that harness...
Where Should the Converter Box be Mounted on a 2011 Suzuki Equator Trailer Wiring Harness
Where do i mount the light receiver on the Suzuki bumper? | If you look at the instructions, linked for you, for the CURT Wiring Harness, # 56087, they have attached the converter box to the frame rail on the 2011 Suzuki Equator. You will want...
Replacement Tarp for Extang Trifecta Signature 2.0 on a 6 Foot Bed 2011 Suzuki Equator
Is there a replacement tarp available for this? Looking to replace my dads leaking Trifecta 2.0 signature tonneau cover for his 2011 Suzuki Equator 6 foot bed. Thanks! | The correct replacement tarp for the Extang Trifecta Signature 2.0 Soft...
Trailer Wiring Recommendation for a 2012 Suzuki Equator
will this product fill 2012 Suzuki equator without towing package? | We do have a wiring harness designed for your Equator but I spoke with my contact at Curt Manufacturing and found that the custom fit wiring, # 56087, is not recommended for...
Filter Your Search
Contact and Help