RVR x > FRED Chassis x > Sable x >
Why Choose a Powered Taillight Converter Over a Non-Powered Model
What dictates the need between using a powered Tail light convertor Vs a non powered? | There's a couple of factors that determine that. On older vehicles, very few vehicles needed a powered converter, because the vehicle's electrical system...
Most Common Flat Towing Vehicles
Might be an odd question Do you have a list of vehicles that will work well for flat towing behind at RV? Thanks for your help. Jim | Hey Jim, We don't have a list made up but the most common vehicles I see people flat towing are: Jeep:...
Availability of Hitch Install Hardware for 2005 Mercury Sable
Im looking for a bolt kit to install my hitch a 2005 Mercury Sable | Hey Larry, do you know what hitch specifically you have? We have replacement hardware kits for the hitches we carry like the Curt part # C12232 that fits your 2005 Mercury...
Width of Channel on the Curt Channel Style Adjustable Ballmount C45900
Can you.let me know the width of the channel on the curt c45900 Regards | The interior channel width of the Curt adjustable ball mount part # C45900 that you referenced is 3 inches. |
Should Rusted Trailer Hitch Receiver be Replaced
I installed one of these Curt Trailer hitches on my 1997 Sable Station wagon and it is now so rusty I am concerned about safety. Is there a way to test it to see if it is still safe to use? | The Curt trailer hitch receiver for your 1997 Mercury...
Will The Curt Trailer Hitch Receiver C12232 Fit a 2001 Mercury Sable Station Wagon?
Will #C12232 fit a 2001 Sable Station Wagon? I don’t see anything about wagons. | Yes, the Curt Trailer Hitch Receiver # C12232 is compatible with your 2001 Mercury Sable station wagon as well as the sedans. This will only fit on models with...
Overall Dimensions of the 90 Degree Elbow Part of Lippert Waste Master RV Sewer Hose # LC359724
Hello, can you tell me the o/a dimensions of Lippert Components waste master 90 degree elbow fitting including integrated handle and shut-off lever? Im concerned about the thickness of the elbow fitting under my service panel in the compartment....
Availability Of SumoSprings Helper Springs For 2008 Tiffin Built On Freightliner FRED Chassis
do you have helper springs to fit this frame 26000 freightliner , we have a 08 tiffin with the front engine and it seems to sway a lot even with new factory shocks . what do you recommend . thanks | There are helper spring options for your 2008...
SumoSprings Fit for Tiffin Allegro Open Road on 2008 Freightliner FRED Chassis
I have a Tiffin Allegro Open Road BA32 FRED. It has a Freightliner 2008 MC Front Engine Motor Chassis. Can U Verify that this RV can use the SSF-501-40 Sumo spring and the SSR-502-54 | I checked with SuperSprings (the manufacturer of SumoSprings)...
Troubleshooting Tail Lights on 2008 Mercury Sable Not Working With Curt T-Connector Installed
Vehicle: 2008 Mercury Sable I installed the custom wiring harness on my Sable this evening and thought it was super easy. I verified that the harness with the yellow wire is on the driver side. And I pushed in all the connectors until they...
Troubleshooting Rhino-Rack Roof Rack Installation on 2018 Mitsubishi RVR Flush Rails
Ive tried to install the kit of the SX031 legs on my 2018 RVR, but if you look at the pics those legs are not straight on the flush rails so when I have the bars on them then they dont fit anymore... Am I doing something wrong or I got the wrong...
Can a Derale Transmission Cooler be Used with an Allison 2200MH Transmission on a Motorhome
I have a 2007 Fleetwood Allegro FRED motorhome with an Allison 2200MH transmission. It appears to have 12AN fittings which means the hose inner diameter is probably .69” or close to it. If I add a transmission cooler and the hose or cooler...
Trailer Hitch and 4-Way Wiring Recommendation for 2018 Mitsubishi Eclipse Cross
I need a hitch and 4 wire harness for a 2018 mitsubishi eclipse cross | For your 2018 Mitsubishi Eclipse Cross we have the Curt hitch # C13273 which is a confirmed fit and then for 4-way wiring you'd want the part # C56296 and you'd be set. |
Will the C12232 Class III Trailer Hitch Fit with Factory Dual-exhaust on a 1998 Mercury Sable
Will this hitch be compatible with my 1998 Sable dual-exhaust model? None of the pictures or installation instructions mention this specific model. | I spoke with my contact at the manufacturer to make sure there were no issues with the factory...
2006 Freightliner FRED RV Chassis Replacement Trailer Hitch Options
I need a hitch for a 2006 Freightliner FRED RV chassis? The one on the chassis now is a Curt 81201 which is discontinued. | For your application you'll need to use one of our universal RV trailer hitches like the Curt Hitch # C13704. This fits...
Replacement Tail Light Assembly for 1988 Coleman Chesapeake Pop-Up
I have a 1988 Coleman Chesapeake pop up camper. It has a 2 bulb/4 wire assembly that needs replaced. Will a 1 bulb/2 wire assembly work correctly for this? Thanks! | Actually, we offer a closer replacement that includes a reverse lamp, more...
Can a Trailer Hitch Be Installed on a 1997 Mercury Sable by a Mechanic
The cost and can a machanic install it. Weight capacity approximately. 3500 pounds. | I recommend the Curt Class II 1-1/4 Inch Hitch, part # C12232, for your 1997 Mercury Sable. This hitch has a maximum gross trailer weight capacity of 3,500...
Safe Driving Speed When Using Tire Chains Like Konig Self-Tensioning Snow Tire Chains TH04115095
how fast can I drive with these on 04 Mercury Sable | All tire chains require reduced driving speeds. If road conditions are bad enough to justify the use of tire chains then they are also bad enough to merit a slower driving speed. Individual...
Dimension of Lippert Drain Hose LC359724
Morning, Can you tell me the outside diameter of the drain hose? I realize the inside diameter is 3. Before purchasing I need to make sure it will fit in my available space. My existing compartment is 5 3/4inch deep, 14inch wide and 31 1/2inch...
Trailer Hitch and Bike Rack for 4 Bikes for a 2018 Mitsubishi RVR
I have a 2018 RVR. Can you recommend a hitch for a bike rack, 4 bikes, and a bike rack? No towing. And I don't want to have to use any straps if possible. | I will be happy to help. For your 2018 Mitsubishi RVR I recommend etrailer Trailer Hitch...
Trailer Hitch and Wiring for a 2004 Mercury Sable to Tow a Boat Trailer
Is there a class III hitch with a 2inch receiver that will work on my 2004 Mercury Sable as I plan on pulling a 12foot aluminum boat with a 8hp 4 stroke motor and gear? | The only hitch available for the 2004 Mercury Sable is the Class II Curt...
The Correct 4-Pole Hardwire Wiring Kit and Installation Instructions for a 2004 Mercury Sable
Will this work on my vehicle -seems there are so many bulbs I was curious whether this is the one would work | The 4-Pole Hardwire Kit, # 20250 is similar to the product you need but it is not quite the right one. The wiring harness for your...
Availability of a Trailer Wiring Harness for a 2000 Mercury Sable Wagon
Im looking for a 4-pin wiring harness for my 2000 Mercury Sable Wagon. All the kits I find exclude the wagon for some reason. Do you have a part number that I can order? Thanks | I spoke with my contact at Curt and he stated that the reason...
Which Hitch Receiver Hole Should Auto-Pin On Thule T2 Bike Carrier Shank Be Used With
I have a Draw Tite hitch model number 75299 and a Thule Bike Carrier model T2 Pro XT. I have no experience with this and was wondering what hole in the hitch the smaller or larger hole do I the Auto Pin in? Thank you for any help you can give...
Filter Your Search
Contact and Help