F-350  x   >   2017  x   >   Touareg  x   >   BRZ  x   >  

I am interested n the Draw-Tite Sportframe Trailer Hitch Receiver for my 2017 Subaru BRZ, but have a couple of questions. Your info says that its a bolt on installation with no drilling. Does that include bodywork? Does the hitch come out...

If you have to flip it over to rise the ball height you have to remove the ball, flip it and torque it down again. What is the torque spec? The nut is a 1.5inch size but what is the wrench size for the ball side to prevent it from spinning?...

I have a 2017 Volkswagen Touareg VR6 Wolfsburg edition with a factory installed hitch and 7 pin wiring connector at the hitch. Im going to be hauling a 5,000 lb boat on a 2018 EZ Loaber 2 axle aluminum trailer with electric over hydraulic brakes....

I am wondering if I can manage taking it off and on my vehicle. How much does it weigh without the sway bars? | The spring bars of the Curt weight distribution system part # C69JR are right at 35 lbs which means the rest of the system weighs...

Can novice install this on BRZ 2017 | The Curt Trailer Hitch Receiver # C11379 is going to be our easiest receiver for a novice installer on your 2017 Subaru BRZ. I have linked the installation instructions below that you can reference to determine...

Hi, I recently purchased an echo brake controller for a 7 way blade light duty trailer for jetskis. My truck, a 2020 VW amarok came with a 7 pin round european trailer socket so I cut the cables and tried to connect them to a 7 way blade socket...

I need a tekonsha P2 replacement harness non vehicle specific. Can you help with that? Thanks | For your Tekonsha Prodigy P2 Trailer Brake Controller # 90885, you can use the Pigtail Wiring Harness for Tekonsha and Draw-Tite Brake Controller...

I am looking at this brake controller : Curt Assure Trailer Brake Controller with Adjustable Screen - 1 to 4 Axles - Proportional Universal Wiring Adapter for Curt Trailer Brake Controllers And I am unsure on if I need to purchase the “without...

Tekonsha Prodigy RF Wireless Trailer Brake Controller - 1 to 3 Axles - Proportional Item # TK94FR Will this product hook up to a 7 prong flat Electric hookup? | Sounds like you are talking about the blade style of RV 7-way. That's the exact...

I am looking for a ready made adapter for a vertical OEM hitch on a 2017 VW toureg to allow horizontal mounting. Do you have one thanks | For your 2017 VW Touareg, I think you are looking for the Curt Vertical Receiver Adapter - 2" to 2", 4-1/4"...

Hi - I just purchased a used Featherlite 3110 open trailer. I also acquired a Fulton Bolt On Spare Tire Carrier from a friend that wasnt using it anymore. Can this be mounted on my trailer? I see most pictures have it being installed around...

Does the package include OEM sized screws to mount to existing bracket? | The replacement 7-way part # A10-7072VP does not come with install hardware as that normally comes with the bracket that is used like with the part # PK12711U. |

I need a break controller for a 2017 Volkswagen Touareg could you please recommend a break controller, associated wiring and any thing else needed to have fully functioning break controller. 7 point receptacle is already installed at rear...

Hi - I just bought the tekonsha prodigy P3 from you. i have also previously installed another P3 in a GMC savana 2500 that I used to own, w/o any factory 7 pin or wiring On installing the p3 controller in a 2017 VW touareg that has the...

Regarding part # 24935. Do you remove the rear panel to install? What is the part # for the correct light hookup? | Yes, to install the Draw Tite hitch part # 24935 that you referenced the rear panel does have to come off. In the instructions...

Are you able to get pollak part # 11-894 I am looking for a source. I have damaged plug and would prefer to repin the plug than splice the harness | We don't carry that Pollak part number but we do have the Tow Ready Replacement 7-Way Harness...

Is it recommended to use ant-sway bars with the Curt True Course or is it effective enough at sway control that this is not necessary? | The Curt Electronic Sway Control System # C94VV does not need any other anti-sway system to work properly....

I dont trust the speed reliability of my smartphone when it comes to activating my trailer brakes during a sway event. Are there any dedicated activators available for this controller like the tekonsha has? | Although the Curt Echo # C51180...

I've heard that installing a brake controller in my 2017 Volkswagen Touareg is pretty difficult. Is there any easy way that has been come up with? I have a 7-way at the rear of my vehicle currently. | For your 2017 Volkswagen Touareg with a...

What brake controller do you recommend for my 2017 VS Touareg? I have the 7 pin connector already. | The brake controller that I recommend using to tow with your 2017 Volkswagen Touareg is the Curt Echo # C51180 because you simply plug it into...

Our 2017 Touareg came with factory 7-way trailer wiring but we just got second trailer, a small utility type with just basic lights on the flat type connector. I hate using wiring adapters and you guys know why. Is there a replacement connector...

I have a 2017 VW Touareg - the 12v power does not activate until a trailer detection - will i be able to utilize the Curt Echo? | Yes, the Curt Echo # C51180 will work as once it and your trailer are connected your vehicle will sense a trailer...

What size scissor jacks for 1959 canned ham? 1800 pounds | The Scissor Jacks part # TJSC-24 that you referenced would work great on your 1959 Canned Ham camper. These are tall and have more than enough capacity which means they'd work really...

Is this the correct tool for the OEM Thule roof rack on my 2017 VW Touareg? | Yes, since the OEM roof rack of your 2017 Volkswagen Touareg is a Thule the correct AcuTight tool would be the part # 1500052318. |