Result:

2000 Ford Excursion with towing package. The current Ford hitch has an electrical connection in a steel frame to the left of the hitch. I don't see that on the CURT 14011 Class 4 Trailer Hitch. Do I have to remove the current electrical connection...

I am looking to replace my trailer hitch on 2003 Ford Excursion and wanted to see if you had a class V option? Not that I want to tow that heavy but for the thickness it looks like they have in the metal. Is there any that would match frame...

Do you have a class 5 hitch for 2000 ford excursion with 2.5” receiver | Our only custom fit trailer hitch receivers we have for your 2000 Ford Excursion are the Curt Class IV # C14011 and Torklift Class V # TLF1006. The Curt has one 2" receiver...

I am looking at using an extended ball mount with added sway control to clear a spare tire carrier bumper. I will be hauling a 22’ tandem axle RV with 455lbs of empty tongue weight 600+/- loaded and a dry weight of 4,300lbs GVWR 7,400. My tow...

Greetings and thanks for your help. The question I have is in regards to the 2000 and early 2001 Excursions. From my research, those model years had an early model hitch that had smaller 14mm hardware and the later 2001-2005 models had an updated...

Are both receiver slots rated the same for two capacity? | Both of the 2" receivers on the TorkLift SuperHitch Original Trailer Hitch Receiver - Custom Fit - Class V - Dual 2" Receivers # TLF1006 have the same tongue weight rating of 1700lbs...

I need a hitch for my 2000 Excursion 4x4 7.3 liter that is rated for 18000 pounds it should be a class 5 hitch do you have one | The 2000 Ford Excursion is actually rated for 10,000 pounds gross trailer weight. The 18,000 pounds is the gross...

I have a 2001 Excursion that the factory cross pin hole on the receiver has been ground oblong from use. So, when you put a hitch in the receiver and install the pin there is a significant amount of play front to back that allows the hitch...

would this hitch physically fit/mount on a 2005 Excursion 4x4, 6.0 diesel? I realize it is more hitch than I need, I just want to know if it would install? Thanks | I have a very high capacity hitch I can recommend for your 2005 Ford Excursion,...

Expert says Thule Stacker or Yakima Big stack will work with factory cross bars on a 2002. My bars actually touch the roof in the center and I might have 1/4inch clearance underneath toward the outside where the bar clips into the track. I...

Will this hitch fit my 2000 Ford Excursion? | I have another option for you, but the TorkLift SuperHitch Original Trailer Hitch Receiver - Custom Fit - Class V - 2" # TLD1109 you were looking at is only confirmed to fit select Ram Pickups and...

Hi, Im looking at upgrading my current battery to the brightway BRW37FR. I was just wondering what I will need to allow a trickle charge from my alternator as well as recommended solar panels. Also, is there an inverter setup available to run...

Hi, I need to replace my factory hitch and would like one rated at 1400 lbs max hitch weight, do you have anything that bolts on? Thanks. | The TorkLift SuperHitch Original Trailer Hitch Receiver part # TLF1006 is designed to be a direct bolt...

Hello, I take that the battery box is made from 100 aluminum. Is it possible to have the box NOT powder coated with black paint? | The TorkLift PowerArmor Solar Locking Battery Box # TLA7710RS is made from aluminum but there is no option to...

2002 Ford Excursion with a 4 in lift. With travel trailer I get rear sag. Was thinking air bags ? Will this product correct sag when loaded? Much less expensive than air bags! Thanks | The most cost effective option we can offer you to reduce...

Im looking for a reciver hit I can mount to the front of my truck for winch and even a mount for my bench vice and grinder can I use this hitch | There are front mount hitches available for your 2005 Ford Excursion but TorkLift hitch # TLF1006...

The Ford Excursion doesnt come factory with upper or lower overload springs. With that being the case, the torklift TLA7310 wouldnt work on the Ford Excursion. Would that be correct? Thanks | You are correct that the TorkLift Suspension Upgrade...