Weight Distribution System Recommendation for a Trailer with 540 lbs of Tongue Weight
Hello, when using a weight distribution system, does that increase the load on the axles of the trailer? My trailer axle weight now is 2780 lbs., the tongue weight is 540 lbs. Will the axle weight increase if I use a weight distribution hitch?...
How to Carry 3 Bikes on a 2009 Pontiac Vibe GT
It looks like there is only one hitch recommended for the GT model, and it is a class 1. I read on the Thule bike rack description that I can only carry two bikes, but I need to carry three. Is there any way for me to be able to do that with...
Is Installation Hardware Included with Curt Class II Receiver Hitch Part # 12234
Does this come with the 1.25 mm x 30mm mounting bolts described in the installation instructions? | The Curt Class II Receiver Hitch, part # 12234 includes all hardware necessary for installing the hitch. All hardware described or listed in...
What Draw Bar Fits Draw-Tite Class I Hitch Part # 24812
I have 3 - 1 1/2 drawbars. How can I tell if they will fit in the #24812 hitch? Is there a measurement of the pin hole location for this hitch? | The Draw-Tite Class I hitch you were looking at, part # 24812 uses a 1-1/4 inch receiver. A class...
Lightest Weight Weight-Distribution System Recommendation for 540 lbs of Tongue Weight on Trailer
Hello, my camper weighs 3280 lbs. loaded, tongue weight is 540 lbs. Please tell me the lightest weighing weight distribution hitch you have. By weight, I mean physical weight of the unit. Mostly concerned with weight of shank and head assembly...
What Trailer Hitch And Hanging Bike Rack Will Work On a 2009 Pontiac Vibe
I want to put a trailer hitch on my Pontiac Vibe in order to put a hanging bike rack. Can you suggest both a trailer hitch and a hanging bike rack that would work together? 2009 pontiac vibe | You will want to check your owners manual or with...
Will Solera 12V Power RV Awning Conversion Kit Easily Replace Dometic Kit on RV
Hello, Im looking at converting my manual awning to electric. My current awning doesnt have the metal pieces that have to be bolted to the side of the trailer like this one. Im just worried that there may not be studs vertically where these...
Adding Larger Wheels to Trailer Hub Assembly with Same Bolt Pattern
I am looking at 8-259-5UC1-EZ. It says they are for 8-12 inch wheels. Is there some reason it wouldnt work for bigger wheels as long as the bolt pattern is correct? I ask because I have hubs similar to this and want to put bigger 13inch or 15inch...
Trailer Hitch Receiver and Wiring Required to Carry a 64LB E-Bike With a 2005 Pontiac Vibe.
Im looking for a trailer hitch for a 2005 Pontiac Vibe. I want to hang a bike rack on it. All the hitches I see are 1 1/4 but the bike carriers are 2 inch. There adapters for thus problem but are they enough to support a 90 pound bike and the...
Is Heat Shield Modifcation Required to Install Curt Trailer Hitch # 12221 on a 2008 Pontiac Vibe
Is the triming of the heat shield necessary on a 2008 Pontiac Vibe. I havent found a video of the installation on said year, and no comments Ive read mentioned triming of the heat shield, but the Curt add says it might be necessary. | The Curt...
Trailer Hitch & Related Items for 2009 Pontiac Vibe
will hitch C12221 fit my 2009 Pontiac Vibe? | Yes, the Curt 1-1/4-inch Class II hitch # C12221 will fit on your 2009 Pontiac Vibe so long as it is the GT version. If your Vibe is other than the GT version then instead you will want Curt's hitch...
Roof Rack, Kayak and SUP Carrier for a 2009 Pontiac Vibe
Hi, I have a 2009 Pontiac Vibe currently with no roof rails. I need to carry 2 SUPs and 1 Kayak. I was considering the Yakima roof rack round bars 58” with the Jaylow fold down with the SUPDawg or Thule Taxi. Can you advise if these combinations...
Troubleshooting 4-Way Trailer Wiring on 32003 Pontiac Vibe
I have a 2003 Pontiac Vibe with a Curt 55057 circuit protector. The wiring installation was by a pro shop 15 years ago and worked well for years. The right turn signal does not work. Bulb good. Cannot find any wiring shorts or discontinuity....
Canoe Carrier Hull Facing Down on a Yakima Rack and Roll Trailer # Y08107
Hello, Id like to carry on a Yakima Rack and Roll Trailer - 78inch this canoe recreation discovery 169 with the hull facing the road so that I can transport my paddling gear inside the canoe. Is it possible? If yes, what kind of carrier can...
Will My Hitch Ball Fit the Curt Class II Round Tube Trailer Hitch on my 2004 Pontiac Vibe
Does this hithch come with a hitch-ball? I already have a U-haul hitch-ball I bought for a 91 jeep cherokee. Can I use it with this hitch? On the metal bar is stamped: V-5 U-haul Max load 3500 lb Tongue wt 350 lb On top of the ball is stamped: U-Haul...
Trailer is not Level When Towing with Recommended Drawbar
I purchased this hitch and the recommended drawbar but my trailer is not level when towing. Front is lower, is there anthing I can do to get my trailer level? | The instructions (see link below) state that the drawbar must be used in the rise...
Is Hardware Included with Draw-Tite Hitch 24812?
The description doesnt mention if the mounting bolts and washers are included. I was wondering if I needed to pick some up? Thanks | Yes, all the necessary hardware and instructions are included with all of our hitches. |
Will the Thule Passage 3 Bike Trunk Mounted Bike Rack Fit a 2009 Pontiac Vibe
Will this bike rack work on a 2009 Pontiac vibe? | I have confirmed with both our fit guide and the Thule Fit guide, and the Thule Passage 3 Bike # TH911XT that you reference, is confirmed as a fit for your 2009 Pontiac Vibe. It attaches to...
Hitch Mounted Cargo Carrier Recommendation for a 2009 Pontiac Vibe
Many carriers specifiy a 2" Class III reciever. I have a Class II 1.25 receiver on my 2009 Pontiac Vibe and I was wondering if this carrier will safely mount on it or if I need to buy a 1.25 to 2 adapter and go with one of those? | Actually,...
What Gear Does 2007 Pontiac Vibe Need to be in to Tow on Dolly
I have a 2007 Pontiac vibe FWD than I’m dolly towing behind my MotorHome. Do I need to pull fuses or just put in neutral. I have no clue . Brand new to this . Please help | I pulled up the owners manual of your 2007 Pontiac Vibe and to tow...
Propane Tank Cover for 20 lb RV Propane Tanks
I was originally looking for a 20# double rv propane tank cover. After a few searches it seems they are rare. Any thoughts are appreciated. Thx | The # CAM40532 propane tank cover will work with a pair of either a 20-lb or a 30-lb steel propane...
Blue Ox Parts Needed to Flat Tow 2009 Pontiac Vibe
Towing a 2009 Pontiac Vibe 4 down with a Blue Ox | For a base plate kit for your 2009 Pontiac Vibe you would want the part # BX3779. Then for a tow bar the most popular option is the part # BX7380 which comes with safety cables. For lighting...
Will the Stay-IN-Play Work On a 2004 Pontiac Vibe With Brake Booster Behind Firewall
I have been studying the installation instructions and various youtube videos for installing the Demco stay and play breaking system DM86VR on my 2004 Pontiac Vibe. On your website It is confirmed to fit this car which is basically like a Toyota...
Lid Supports that Fit Yakima Skybox Carbonite 16
Hi, I have a Carbonite Skybox 16 and am in need of the three latches that are fastened along one side of the top lid. I understand that I will have to drill out the existing rivets and use nuts and bolts to refasten the three latches. I also...
Filter Your Search
Contact and Help