!Wildcat Maxx Travel Trailer  x   >   !1701  x   >   Kodiak  x   >  

Good Morning, I own a 2009 dual axle Caravan trailer that has ST 185 r13 tires on it. Im sure of the GVWR but I think its 6000#. I was wondering if it is possible to retrofit my grease bearings with a Cool Hub oil based system. What would I...

I want to add disk brakes on my 2014 Montana 5th wheel. I believe i have 8000 lbs axles. the questions is are they electric only or electric/Hydraulic. what more info will you need to give me the part# and cost? CVW 15700 Thanks | Disc brakes...

I would like to add brakes to a triton snowmobile trailer with dual axle 10 wheels, do you have a complete surge kit for this? | In order to find if a disc brake kit like the Kodiak Disc Brake Kit - 8" Rotor/Hub - 5 on 4-1/2 - Dacromet - 2,000...

I have a triton SF-21 bass boat. I don’t know the trailer mfg. it is a tandem trailer with disc brakes on the rear wheels. They have not worked for many years. How do I identify the correct Rotor and brakes kit as well as the hub for the front...

What is the correct part number for the wheel stud for the TDE 46210 hub. I know that its a 1/2inch stud, 2inch long, but I cant seem to find the right knurl diameter. Do you have it ? | What diameter knurl do you need? I was not able to look...

I have a 225 SS caliper. The flexible brake line connection to the caliper will not work. The banjo bolt does not fit into the brass connector and it doesnt fit into the caliper threaded hole that the brass fitting screws into. It looks like...

I know that the calipers are SS. inch AREinch the brake pads SS backed or just standard ? | The brake pads included with the Kodiak Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet and Stainless - 3,500 lbs # K2HR35DS you were looking...

i would like to convert my hydraulic drum to hydraulic disk brakes. i would like to hear your opinion on which kit will best meet my need. i currently have 7000lb dexter torsion axles. i have attached the axle spec sheet for your reference....

I bought a momentum toy hauler. It has the Hydrastar 3 axle disc brake conversion setup. What/where can I get brake pads replacements? | You can use the Kodiak Ceramic Brake Pads # K250CP-SS to replace the worn pads on your Hydrastar Disc Brake...

I purchased a kodiak disc brake kit no.K2HR35D, and after installing it and trying to use the powerbuilt brake bleeder kit, I found that the kodiak bleeder fitting woujld not accept the hose that came with bleeder kit. In fact the kodiak bleeder...

Since I need brake work on my EZ Loader boat trailer, I want to swap all 4 drum brakes for disc brakes. The 2001 trailer model is 1-TEZB 23-25/27 7500 H2X. The bearings and seals were replaced last week, so Ill be reusing them. While doing...

what would the proper lug and stub combo be for these wheels? | The Karrier ST225/75R15 Radial Trailer Tire with 15" Aluminum Wheel # AM32669 fits 1/2"-20 bolts so you'll need something like the Kodiak # K12WB2 which is 2" long. It's best to...

I want 1 piece lugnuts instead of the two piece with a metal sheath, they ge bent and the wrench will not fit on them, DO you sell 1 piece that is solid and not wrapped. | We do! Check out the Kodiak Stainless Steel 1/2" Lug Nut # KALN1375S....

I have a trailer axel which I want to buy oil seals for the bearings. The axel has a sticker on it saying lippert V000631990 Capacity 2500 serial # S007912128 lci35-sb-87.5-71-US-L-545-7222-30PT-CAP 2500# V00044478 Can you please help me...

Looking for a disk brake conversion kit for a2019 Grand design 5th wheel with Dexter 5200 lb axles. I would prefer to use the installed factory brake controller in the 2018 Ram 2500. I do not see a compatible “ kit” listed in your web site,...

Can you measure the ID of the slip on rotor so I can make sure they will fit over my no-name 3,500# hub? | The slip-on rotor included with the Kodiak # K2R35D disc brake kit have an inside diameter of 6.681 inches and an outside diameter of...

Do these fit 2250 brake caliper | Yes, the Replacement Silicone Dust Boot # K250BSSSI will fit DBC-250 and DBC-2250 calipers. |

I need wheel studs for a shorelander trailer. 1/2 -20 size. I have tried some from auto parts stores but the knurled part is too big to fit in the hub. Do you have anything? | Can you please let me know the what the diameter of the knurled part...

I am looking for caliper bolts for Kodiak disc brakes - item # K2HR712E. Are these correct? | Kodiak disc brake kit # K2HR712E uses 250 calipers, # KDBC250E, and the bolts for those are indeed # KGBS. There is also a rebuilt kit should you...

Do you have the brake lines for a 1999 seabreeze rv . And how much are they ? | We do have brake lines you can use with your RV. Brake lines are not vehicle specific though so you can use any lines provided they are long enough and have the...

What is the proper gear oil to put in my 9,000 lb. oil bath axle. | I recommend the Kodiak Synthetic Bearing Oil for Oil Bath Hubs - 8 oz Bottle # XLPROLUBE. It is a 90 weight synthetic oil. Dexter bought out Kodiak so this meets their specifications. I've...

What nuts do you have for these wheels? 2009 Casita with Dexter 3500 | Since the Dexstar Steel Mini Mod Trailer Wheel - 15" x 6" Rim - 5 on 4-1/2 - Silver Powder Coat # AM20537 is meant to work with 1/2"-20 wheel studs, you can use the Kodiak...

Hey I’ve got a tandem axle trailer with 8k Lippert Axles with 5/8” studs I was looking into converting it to electric over hyd disc brakes | I would be happy to recommend all of the parts you need for adding electric over hydraulic disc brakes...

I have a Redi-haul FSL16272E-102 trailer with factory electric drum brakes. I want to convert to electric/hydraulic disk brakes and need all the parts for that change over. The Redi-Haul cut sheet shows 2 Dexter Torflex 7,200 pound axles with...