Solution to Mount Aluminum Car Hauler Ramps in Enclosed Trailer for Transport
Do you have any kind of mounting equipment that can attach the ramps to the trailer for transport? | We do have a solution to mount the # 288-07503 in what I'm assuming is an enclosed trailer. What you can use is the CargoSmart Rotating Safety...
ATV/UTV Wheel Tie Downs That Are Made In The USA
I see these were not made in the USA. Do you have a set that is made here in the USA? | While we do not have an entire kit like the Erickson ATV E-Track Tie-Down Kit # EM98CV that is Made in the USA, we will have different parts that are Made...
Can Snap-Loc E-Track Self Tapping Screws SL99FR Be Used To Install E-Tracks To Metal Under 3/4" Wood
Are the 1-1/4inch Snap-Loc E-Track Self-Drilling Metal Screws going to be long enough for my trailer? I have an enclosed trailer that I am going to install 5foot long etracks in the floor. The floor is 3/4inch plywood and then it would go into...
Cargo Carrier Solution for Carrying 2 Small Dirt bikes and Snowblower
Hello! I could us a product recommendation. Id like to find a cargo carrier that could be used for 2x small dirtbikes 150lbs each, or less in the summer, and a medium-sized snowblower in the winter. Is there a product youd recommend that...
Recommended Hardware for Installing E Track Onto Trailer Interior Side Walls
Do you sell screws to attach e-tracks to trailer walls? | The hardware needed will depend on what surface you'll be mounting the e track to and how thick it is. We do offer 1 x 1-1/4 inch hardware for installing e track like the # 3371903055...
What is the Maximum Wheel Diameter for Tow-Rax Floor Jack Mount
Hi, What size wheels will this mount accommodate? I have a jack with 5 inch wheels, most of these will only fit 4 inch I believe. LMK.... | The maximum wheel diameter that will fit the Tow-Rax Floor Jack Mount # TWSPJSTAL is 4 inches. It doesn't...
Self-Tapping Screws to Install E-Track
Do you sell them to replace factory screws - about 1 1/8 inch ? Or where can l buy them? | Your best option is Self-Drilling Screw Hardware for Snap-Loc E-Track Tie-Down Anchors - Qty 4 Item # SLHSDDS-P. They are 1-1/2 inches long though. If...
What is the Proper Orienation for Installation of Snap-Loc E-Track Tie-Down Anchor
Proper orientation for maximum strength? | The Snap-Loc E-Track Tie-Down Anchor # SLSS will have the same break strength and safe working load limit no matter what the orientation is when installed. The maximum load (break strength) is 3,000...
Recommended E-Track Ratchet Strap Tie-Down 2 Inches × 16 Feet With Highest Weight Capacity
What is cost of a 2in ×16 ft etrac ratchet strap rated 11,000 pounds | E-Track straps go up to 1,500 lbs max capacity. I've linked the page to all of the e-track strap options we carry to assist. It sounds like you will want the Snap-Loc E-Track...
E-Track For a Small Mounting Area on a Tow Dolly
Hi, I like to use E Tracks instead of D Rings. I have a car tow dolly that has about 3inch room on each side to hook my strap on to it. I like to use E track. Is there an E Track that short that can be installed on a 3inch x 3inch surface...
Recommended E-Track Anchor for Enclosed Race Trailer Walls
I was look at the single slot E-track Code: SLSB... I have an enclosed race hailter with the laminated particle board interior walls and wooden studs behind it... Would you advise using this for that sort of application? | The Snap-Loc E-Track...
Recommended Cargo Stabilizer For Large Bin In 2005 Ford E450 Box Van
I have a Large Trash bin approx 2,000 lbs loaded in a 2005 E450 14ft Box Van. Can you suggest a method of securing the cargo? It was previously attached to the wall and it pulled the e-track out. Thank you | The biggest problem with an E-Track...
Im working on a custom project and Id like to incorporate some holes to accept e track accessories. Ive found that e track is 12 gage but I cant find any information about the length and width of the rectangular holes. Can you please let me...
Will Zinc Coated E-Track Bolted to an Aluminum Trailer Cause Corrosion
When bolting track to deck is there any concern regarding dissimilar metals being joined in the process - zinc coated steel onto aluminum? If so, what should be done during installation to minimize the difference? | The zinc plating on the...
Package Contents of Snap-Loc Hooks # SLAHI
Can you tell me how many hooks come in a package Thanks. | The # SLAHI is sold in quantities of 1 piece, if you would like more than 1 you would just need to update the quantity box next to the add to cart button. I have linked the above mentioned...
E-track Solution for Securing Trike Cycle and Can-Am Spyder to trailer
I have a -tail trailer for my trikes. I would like to use a different tie down and saw your etrack system. I was looking at one mount in front and behind the tire not the full length. Question is do I need to run the straps back straight...
Hardware for Attaching E-Track to Wood Floor and Walls
I have an aluminum ATC trailer that has wooden floors and siding. I want to put Etrac down on floors and some of the side walls. Wood is 3/8” thick. What type of screws do I need? | Since you have wooden floors in your trailer the hardware I...
Dolly Recommendation for Moving Generator Around without Wheels
I am looking for something wheeled that I can put my Powerhouse PH2100Phi generator to allow me to wheel it rather than lift it. Do you carry something like that? | You could put your Powerhouse generator on a moving dolly like the part # SL1500DR319-P...
Will The CargoSmart Rope Ring Work With Snap-Loc E-Track Tie-Down Anchor
will the cargo-smart rope ring work with the snap-loc single tie down anchor | Yes, the CargoSmart Rope Ring part # 3481767 is compatible with the Snap-Loc E-Track Tie-Down Anchor part # SLSS. The safe working load limit of the Snap-Loc E-Track...
Will the Snap-Loc Loc-Ring for E-Track Part # SLARI Work with Ford Box Tie-Downs
Will these work with Ford box link | I spoke to my contact at Snap-Loc and they informed me that the Snap-Loc Loc-Ring for E-Track Tie-Down Anchors part # SLARI will indeed work with the Ford Box Tie-Downs you have in your 2017 Ford F-350. I...
Keeping Snow Out of E-Tracks on a Snowmobile Trailer and Corrosion Prevention
Hello, I purchased a whole bunch of e-tracks for my snowmobile trailer and they are awesome of course. Couple questions: any idea on how to keep the snow and ice from accumulating inside of the tracks? We have only had one snowfall so far...
E-Track And Tie-Down Strap for Securing Ladder on Inside Wall of Enclosed Utility Trailer
Want to secure a ladder to inside of an enclosed trailer. I have the brackets that the ladder sits on but wanted to secure it to a horizontal etrax above and below the ladder. I was considering part SLLS28CER but it will obviously have a twist...
Strap Recommendation to Secure Front Bike Tire During Travel
I have a 2021 Mazda CX-5 and 29er Specialized Carve mountain bike. This bike rack looks great but Id like to know what type of strap you recommend to keep the front tire stable while the car is in motion? | Great choice on the Kuat Beta # B202-2! To...
Erickson E-Track Straps for Enclosed Trailer Transporting ATV
My Enclosed trailer has two rows of front to back etrack already installed. Can I use the straps with my existing track and not use the provided chocks? | If you already have four E-Tracks mounted to the floor of your enclosed trailer and you...
Filter Your Search
Contact and Help