Dimensions of Curt Trailer Hitch Receiver 13900
Can you tell me what the measurement is from the bottom of the vehicle frame to the top of the cross tube and from the bottom of the frame to the top of the receiver tube? Seeing if this will work on my 1963 Dodge D100. | The Curt Trailer Hitch...
What Size Socket is Needed to Tighten Trailer Hitch Ball # 19286
What size socket is needed for this 1-7/8inch nut? | You will need a 1-7/8 inch deep well socket for the 1-7/8 inch nut on ball # 19286. To install the ball you can use a bench vise to hold it while torquing down the nut or if a vise is not...
Can Peterson Round Flush Mount Trailer Light be Installed in 1/8 Inch Thick Diamond Plate
i am mounting tail lights in 1/8 diamondplate. is this the product i want? i just want to cut the holes and mount with a rubber grommet. i do not want to have to attach light in back or anywhere else. your video explains nothing about mounting also...
Is The CIPA Universal Door Mount Mirror A High Quality Glass Mirror
You said the CM45000 has a glass mirror thats high quality. Is the CM94500 also a high quality glass mirror? | The Replacement Mirror Head for CIPA Universal Door Mount Mirror - Stainless, part # CM94500, does appear to be glass. We have not...
Trailer Hitch Availability for 1967 International Travelall 1200B 4x4 3/4-Ton Panel Truck
Have a 1967 International Travelall 1200 B which is a 4x4 3/4 ton panel truck. Would like to have a hitch similar to the Curt p/n 15320 that I installed on my Chevy because I have a spare tire mounted underneath the rear similar to the Chevy...
What Tire Chains are Good on Ice and Will Fit Both 235/75-15 and 225/75/15 Tires
will these chains fit my 235x75x15 and 225x75x15 tires? | The Titan Chain Snow Tire Chains w/ Cams part # TC2819CAM that you referenced will fit your 235/75-15 tires but not your 225/75-15 tires. The reason for this is because the 235/75-15...
5th Wheel Install Kit Rail Placement on a 1975 Dodge D200 Long Bed
I have a 1975 Dodge D200 2 wheel drive with 8 foot bed. what is the measurement from end of bed to rear base rail. I am installing a Reese 14k 5th wheel hitch with universal mounting kit. | Using Reese universal installation kit # RP30035 on...
Is Drilling Required to Install B&W Trailer Hitch Receiver # BWHDRH25122 on 1976 Dodge Truck
It states that no drilling is required, is that really true? When I searched this part number many other makes come up attached to it. So just want to know if it is a true no drilling required or not. Thanks | To install the B&W Heavy-Duty...
How Much Power/Amps Does the Tekonsha Prodigy P3 Draw
Can you tell me what a typical initial surge current Amps or power Watts is for a Tekonsha P3 brake controller when brakes are initially applied? Im mostly running this with a single axle trailer, but will occasionally use it with double axle...
Correct Westin Replacement Rear Bumper for 1978 Dodge Full Size Pickup
Will this fit a 1978 Dodge Pick up | The correct Westin Fey Diamondstep Rear Bumper for a 1978 Dodge Full Size Pickup is part # 20000-92230. This kit comes with both the rear bumper and the custom fit brackets you need to use to attach it. The...
Recommended Air Brake to Electric Brake Controller for 1969 International Loadstar 1890 Truck
which controller would give better performance I have noticed that instead of using a brake controller like this one, 1300-80, it is recommended to use the , # 90885, brake controller. Is the electric brake controller as consistent with braking...
Truck Bed Bike Rack That Isn't Fork Mounted That Works With A 1966 Dodge Pickup
I currently have the Swagman Pickup bike rack with fork mount. Im wondering if I can get the G1025 to convert it to a wheel mount so I dont have to remove the front wheel. | The Replacement Wheel Holder for Swagman G10 Bike Rack # G1025 unfortunately...
Time-Delayed Brake Controller Recommendation to Match Tekonsha Wiring on Truck
Does Tekonsha make a time delay brake controller that uses the same wiring harness plug as the P3? I have installed a P3 and can’t get it to work right so want to go back to a more basic and simple to use controller and hoping Tekonsha makes...
What is Correct Placement Of Goose Neck Hitch Ball in Full Size Pickup
where in the bed does the ball have to be front to rear ? over the rear axle,slightly in front the rear axle or can it be 8inch to 10inch behind rear axle??? | A goose neck hitch ball, or the center of a 5th wheel hitch head for that matter,...
How to Measure to See if Curt Hitch part # C15300 will Fit Truck
My 1968 dodge D100 has a frame width outside of chassis both sides of about38 or 38-1/4. I was told I needed the c15300 here but the width youve stated in the QandA is 37-1/4. Am I missing something? Thanks | What you will want to do is...
Can the Side or Traffic Cameras on the Furrion Vision S Wireless Camera System Be Adjusted
The side camera view at the rear of the camper are aimed 1 1/2 ft away from the back of the camper. It says they are not adjustable. Is there a shim kit that would help aim the cameras, so they so straight back along the side of the camper?...
Recommended Trailer Hitch and Wiring for 1965 International Travelall
Hi, Im looking to purchase a Curt Hitch 14082. what would the appropriate 4 pin flat connecter harness and brackets be? I have a vintage 1965 Travelall that this is going on. There are numerous choices for the wire harness. I like the the idea...
Parts Recommendation to Install a Brake Controller In a 1974 Dodge Sportsman
hi a have a 74 dodge sportsman a want to haul my tamdem boat around but the motorhome didnt come with any trailer wiring. I have a tekonosha voyager brake controller off another vehicle and need to know the wiring from scratch thanks | We have...
Parts Needed To Install A Brake Controller On A 1980 Dodge W400 PowerWagon
Hi. Transfer for info regardig e- break installation. Please advice 25000 / 30000 lbs 2,5 inch squash bolt reciever hitch assebly / steel construction for ny Dodge W400 PowerWagon. | If you're referring to what you need to install a trailer...
Can the Trailer Clearance Light part # MC53RB be Flush Mounted
looking for a way to flush-mount this light. am using with 4 inch round grommet mounted 435800 tail lights would like it to have the same profile.. can this be done or do you have another 2inch light to suggest. i dont want it to stick out...
Hitch Recommendation for a 1976 Dodge M-class Motor Home
Do you have a trailer hitch for a 1976 Dodge M-class motor home? Sportsman American Clipper. | For your 1976 Dodge M-class motor home we don't have any custom fit hitches available, but we do have a multi-fit hitch that should work as long as...
5th Wheel Installation Kit for a 1976 Dodge Ram Power Wagon with 6 Foot Bed
is there a install rail kit for my 76 dodge power wagon or will a 2006 dodge ram kit fit my truck | Yes, we have an installation kit for your 1976 Dodge Full Size Pickup with 6 Foot Bed. You will need to use the Reese Universal Base Rails and...
Can Bulb be Replaced on Peterson Red Flush Mounted Sealed Turn Signal Light 435800
is bulb replacable on this light? what is replacement bulb # | Peterson brake/turn signal light # 435800 is sealed and cannot be opened up to change out the bulb. I pulled one from the warehouse to verify this and cannot get the lens off (without...
Can I Install Trailer Hitch Upside Down on 1972 Dodge Full Size Pickup
Can I install the truck receiver hitch up side down on my truck frame safely? It allows me upward additional clearance for offroading is why.And bothmy trailers are spring over axle and tall.I have inverted itfor test fit and bolt holes align....
Filter Your Search
Contact and Help