Where is AMG AMG102202 American Flag Hitch Cover Manufactured
Where is the cover manufactured, what country? | According to the good folks at AMG, the emblem itself use on the # AMG102202 american flag hitch cover is manufactured in Ft. Worth Texas, the backer portion that slides into the hitch is manufactured...
How Thick is the Replacement Foam Gasket for AMG Hitch Covers
How thick or these gaskets? do they come in different thickness? | Foam gasket # AMG-FM is very thin. You are looking at 1/8 inch thick. This gasket only goes in this one size since it has a specific application, fitting AMG hitch covers. All...
Availability of University of Missouri Hitch Cover
Do you have a 2 inch hitch cover for the Unversity of Missouri-Columbia? | Mizzou is located about an hour and 15 minutes west of our location in Wentzville, Missouri. Do we have hitch covers? You better bet we do! If you click the provided...
Where Is The AMG Alabama Hitch Cover Made
Where are the covers made? | I contacted our representative at AMG about the AMG Alabama Hitch Cover, part # AMG1000124. The emblem or seal on the hitch cover is made in the United States. The black plastic piece that attaches to the hitch is...
What Size Receiver is on a Hitch for a 2020 Ford Ranger Lariat and What Receiver Cover Can I Use
Not sure of the hitch receiver size on the 2020 Ford Ranger PU. This will be a present, I dont have the truck available to measure the receiver. Thank you. | It looks like the available hitches for a 2020 Ford Ranger Lariat are all 2" receivers,...
Fit of Michigan Logo Hitch Cover on 2011 Toyota 4Runner
will a 2 trailer hitch cover fit a 2011 toyota 4runner? | As long as the 4Runner is equipped with a 2 inch receiver, and the top of the receiver has at least 3/4 inch of clearance above it, the Michigan Logo Hitch Cover should work great with...
Can the Iowa State University Hitch Cover # ISTHRC be Secured with a Locking Hitch Pin
IfI purchase item ISTHRC, am I able to to lock it on my vehicle? I see that it requires a pin, but if I use a locking type pin, will it keep it with a better chance of not being stolen? Thanks! | Yes, you can secure the Iowa State University...
Depth of Hitch Pin Hole On LSU Hitch Cover
I am wondering if this would fit in the hitch of my 2017 Toyota Tundra. I know its a 2 inch hitch but my current hitch plug is too deep to reuse. | The hitch pin hole of the LSU Hitch Cover # AMG100246 is about 2-1/2 inches from the back of...
Adapter Recommendation For Trailer Hitch With 1-1/4 Inch Receiver Opening To Use 2 Inch Hitch Cover
the opening in my hitch is 1 3/4 . does a Wisconsin badger hitch 2 inch cover able to be used | The University of Wisconsin Trailer Hitch Receiver Cover, part # AMG102646, you referenced is designed to fit 2 inch receiver openings. You may...
Availability of Rubber Cover that fits Over Entire Hitch Ball
Have seen, and am looking for, a rubber cover that fits OVER the whole ball mount? | We have covers that will fit over the entire hitch ball, though at present we do not have covers that will fit over the mount. The mount will be powder coated...
Superman Logo Trailer Hitch Receiver Cover for 2 Inch Receiver
Hello, I have a chrome hitch cover similar to your product PC00225 for my 2inch trailer hitch. It came with a 3-hole mounting which is just slightly too short to meet up with the hitch pin hole. Do you sell longer mounting brackets? Thank...
What Size Hitch is the Foam Gasket Part # AMG-FM Designed to Fit
Dear sir/madam, Im interested in purchasing a foam trailer gasket. What are the inside dimensions of this product? Or in other words, is this designed to slide over a traditional 2inch yoke? | The inside dimensions of the Foam Gasket part...
82nd Airborne hitch cover available? | Unfortunately we do not have the 82nd Airborne Logo hitch cover. We do have US Army covers like the emblem # AMG102391, but nothing at that is Airborne specific. I've attached our other Army covers for...
Recommended Batman Hitch Cover for a 2" Hitch Receiver
I'm a big batman fan, will this hitch cover fit on my 13419 receiver | Yes, the Batman Logo Trailer Hitch Receiver Cover # AMG102808 you're looking at will fit just fine in your Curt Trailer Hitch Receiver # C13419. |
Recommended Hitch Lock for Wisconsin Trailer Hitch Cover
AH-41008 Is this cover lockable with a pin? | Yes, to lock the University of Wisconsin Emblem 2 Inch Trailer Hitch Cover # AMG102646 to your hitch receiver, I recommend our etrailer.com Hitch Receiver Lock # e98880. This lock is designed for...
Availability of Class II Hitch Covers for 1-1/4 inch Hitches
Looking for 2nd class hitch hitch cover on a VW Tiguau | To see all of the hitch covers we offer that are designed to fit 1-1/4 inch hitches like the Class II hitch you have on your 2013 Volkswagen Tiguan you will need to click the attached...
Recommended Anti-Rattle Trailer Hitch Receiver Lock To Minimize Movement And Noise.
Recently purchased a hitch cover #NHC111 and even with the included gasket, there is quite a lot of movement little surprised and disappointed - no reflection on etrailer. Looked on your site and you recommend two products - #AMG-FM and #BWTS35020....
Which Hitch Pin is Needed for Oregon State Hitch Cover # AMG102561
what hitch pin would i use with the oregon state Beaver hitch cover | The Oregon State Hitch Cover you mentioned, part # AMG102561 is compatible with a 2 inch receiver, which would use a 5/8 inch diameter hitch pin like part # PC3. However,...
Availability of Metal Hitch Cover for University of Nevada at Las Vegas
Im looking for a metal unlv trailer hitch cover. Do you guys make them and Im just not seeing it? | We do currently offer a Nevada-themed hitch cover. Part # AMG102547 is an all-metal hitch cover featuring the Nevada Wolf Pack emblem in chrome...
Are Additional Gaskets Needed for the Hitch Cover # AM100703
Im purchasing a hitch cover but wondering how many foam gaskeds do i need? Also, do you sell the bolts that i need to secure the cover in the receiver? Thanks | Looks like you are planning on purchasing the Hitch Cover part # AMG100703 . This...
Will A/M/G American Flag 2-Inch Hitch Cover # AMG102202 Fit Hitch on 2008 Toyota Tacoma
Will this fit a tacoma 2008 hitch? Thx. | The A/M/G American Flag 2-Inch Hitch Cover # AMG102202 will fit a 2-inch hitch receiver opening and since this is the hitch size offered for your truck this hitch cover will work fine. The American...
How to Fit a 2 inch Hitch Cover to a 2-1/2 inch Hitch
will this fit a class IV receiver? if not, which Auburn ones will fit? | The Auburn University Color Logo Emblem 2" Hitch Cover # AMG100062 that you referenced is designed to fit a 2 inch trailer hitch. Class IV are 2 inch hitches but it sounds...
US Navy Bug Shield Compatibility with 2015 Chevy Colorado
I have a 2015 Chevy Colorado. Does this product fit this vehicle? | The EGR Armed Forces Superguard Bug Shield Hood Protector - Navy # 301430NVY is not a fit for your 2015 Chevy Colorado. It is a fit for Chevy Silverado models form 2005-2007...
Foam Gasket for 2 Inch Lighted Chevy Hitch Cover # CR-007C
Is there anyway to purchase the hitch cover foam gasket? | For a replacement foam gasket for hitch cover # CR-007C I recommend # AMG-FM. |
Filter Your Search
Contact and Help