!Monaco  x   >   !jetta  x   >   Shocker Hitch  x   >  

Can the Shocker Hitch XR Adjustable Drop Hitch - 2-5/16" Ball - 7-1/2" Drop - 12K Item # SHK88ZR be used with a sway bar? | Yes, you can use the Shocker Hitch XR Adjustable Drop Hitch # SHK88ZR with a Sway Control Bar # 17200 by using the Sway...

What is the horizontal measurement from the furthest pin hole to the part on top that forms the highest peak of the hitch? I have a mounted pintle hitch above my 2 inch receiver, so I want to be sure the highest point of this hitch will clear...

is there a keyed alike 1/2inch locking pin set that can be used instead of the supplied 1/2 inch bolts? If so, would they meet/exceed the grade 5 rating? Im driving a 2011Honda Pilot, pulling a 2012 Casita 17foot trailer. | I do have some options...

Hello, Will the Shocker Air Equalizer for Weight Distribution Hitch - Set Up Kit - 2inch Hitch - 12K Item # SHK68VR accept the...................... Equal-i-zer Weight Distribution w/ 4-Point Sway Control - No Shank - 12,000 lbs GTW, 1,200...

Is it possible to remove one of the balls from this mount? If not, do you sell a mount with just a 2inch ball? I need to haul a trailer with the mount all the way down in the bottom hole, and the 2nd ball is so much lower that it drags the ground...

I am concerned about whether my tailgate can be lowered with the Shockerhitch in place. What is the distance from the top of the shank to the top of the air bladder? | I went and spoke with Shocker and they let me know the the measurement on...

Hello, What is the vertical distance between the hitch pin center of receiver tube and bottom of the Shocker XRC SHK34RR?. Please do not include hitch ball bolt or nut in the measurement. Thank you! | I checked with Shocker hitch and they...

im a little confused as to what hitch this will fit. it says its for a 2 1/2inch but in the footnote at the bottom it says that it will not fit a 2 1/2inch even with a reducer, which leads me to think its for a 2. i just want to make sure...

Is there a weight distribution model? SHK95VR | Hey Ron, There is indeed a Shocker Hitch head that will work with a weight distribution hitch, with the right one depending on your hitch size. - 2" Hitch: Shocker Air Equalizer for Weight Distribution...

good afternoon, interesting problem. just got a 24 foot enclosed car trailer, went on a trip , had to move car three times to get it to tow at speed on interestate. once i got car set, towed fine. truck was loaded with approximately 1000 lb.....

Hi I have a 2023 ford ranger with the curt C13417 trailer hitch. Do you have a shocker hitch that you recommend for this truck and hitch combination? | Yes, we do have a Shocker Hitch that will work great with the Curt Hitch item # C13417 on...

Hi, I have my small fifth wheel at a local welding shop to get a quote. A previous owner cobbled together a goose neck ranch style hitch to the fifthwheel. In doing so, he butchered the ttrailer framing tabs that stick down into where the pin...

do you know if there is a product similar to a BWTEXA4200 in 4 square extend a goose thanks | Similar to the B&W Extend-A-Goose Gooseneck Coupler - 2-5/16" Ball - 10" Offset # BWTEXA4200 is the Shocker Hitch Air Cushioned Gooseneck Coupler...

Do you offer a 20,000 ball mount for a 2 hitch...thanx | Here is a list of some of our 20,000LB and above hitch systems as we do not just have a ball mount shank rated that high. Shocker Hitch HD Air Cushioned 2-Ball Mount # SHK95VR Shocker...

Is it possible to buy the shocker hitch without the ball mount? I want the ball mount with the sway control but dont want to pay for the hitch that comes with the ball just to discard the ball that doesnt have the sway control. | Hey Anthony,...

I have a 2018 RPod trailer, that I want to pull with a 2007 Toyota 4-Runner. Ive pulled stock trailers and popup campers, but this Rpod is taller and lighter. Im wondering about a sway bar...I just got a Trimax TRZ6AL adjustable hitch will the...

Will using this pin box adapter void Lipperts frame warranty | Yes, it will. Lippert does not extend their 1 year frame warranty to cover the Shocker 5th Wheel to Gooseneck Pinbox for Lippert 1621/0719 and Rhino Box item # SHK23MR or for the...

Whats the maximum towing weight this channel can withhold? | I reached out to Shocker Hitch and they said that the Shocker Trailer Tongue Mount item # SHK37MR has a maximum towing capacity of 20,000 lbs. |

I have a Ford F350 2022, so this 3” shocker hitch will fit. Do you carry a set Locking Pins for the 3”? | To lock the Shocker Hitch HD Air 2-Ball Mount w/ Sway Control Tabs # SHK88MR to the 3" hitch receiver on your 2022 Ford F-350 I recommend...

I need a /Rise with 4inch in . Needs 12,000 lbs GTW. or greeter. With a 1200 tongue. Any chance you have item? | The only way that we have the rise and weight capacity that you are needing is with the Shocker Hitch XR Adjustable Drop Hitch #...

Hello, I am looking for 2 7,000 pound Dexter style axles, complete with drums, brakes, bearings, and suspension and mounts. The current spring to spring center is 64, and hubface to hubface without drums of 70. | I wish we had the axle configuration...

I would like to know the outside diameter and the collapse height of the air bags used with the Shocker Hitches. Thank you | The width of the Replacement Air Bag for Shocker Air Receiver Hitch # SHK75RR is 7". The compressed height is approximately...

Hello, what is the measurement from the back pin hole to the face of the SHK93RR hitch? | From the rearmost hitch pin hole to the face of the Shocker Hitch Impact Cushioned Adjustable Clevis # SHK93RR ball mount is 8-3/8" (see bottom right figure...

I'm getting a lot of chucking on my 2-1/2 hitch while towing with a 2-inch ball coupler. Is there a hitch I can use that has some kind of suspension support built-in? | For a great solution to decrease chucking on your 2-1/2" receiver while...