!Monaco  x   >   !Momentum G-Class 5W Toy Hauler  x   >   TecNiq  x   >  

What is the wire gauge on item TN76VR? | The Mini Round LED Boat Accent Light with Cover # TN76VR has 18 gauge wire. When you install this I recommend using the Deka Heat Shrink Butt Connectors # DW05743-5 as the heat shrink wrap will protect...

LED Boat Spreader Light - Pedestal Mount - Flood Beam - 825 Lumens - 12V/24V - Red and White LEDs What type of switch or controller is needed to select between white and red? | The switch that I recommend using with the LED Boat Spreader Light...

I know these are surface mount but where would they be mounted on a pontoon boat. These lights seems to have about a 30 degree offset. If you mounted them on the aluminum side panels they would not point straight ahead. Thanks | The most common...

Looking to put this on a tear trailer, and wondered if it can be installed with a PWM dimmer switch like this: 05-12315 JR Products Replacement RV LED Light Side-Slide Dimmer Switch - Black | Yes, the LED Porch or Deck Light part # TN38XR is...

I was wondering if this item can come with smoked lens. | While TecNiq does not offer the Mini Rectangular LED Boat Accent Light # TN47FR with a smoke lens they do have the Covers # TN44FR & # TN94FR in black. These hide a majority of the lens...

Looking at the diagram, does it mean the .215” is the depth of fixture that protrudes from the surface? | Correct; the 0.215" (about 1/4") depth is indeed the amount that protrudes of the Interior LED Boat Accent Light w/ Cover - Recessed Mount...

I am designing a 102 inch wide 25 foot long box trailer. Can I use the TecNiq Mini LED Trailer Fender Clearance Light # TN78XR even though this is not a boat trailer? If so, would I need to mount one on each corner or can I just put one on...

TN22VR What size is the hole in the center of these clips? | The hole in the middle of the Mounting Clips for TecNiq Slim LED Strip Light # TN22VR have a 1/8" diameter (see attached). |

I would like to add the led strip lights under my rv awning. Are any of the lights you sell dimmable? I’ve noticed some rv’s are too bright. Thanks Wes | Hi Wes, Since you're wanting to be able dim the lights I recommend going with the Smart...

Would I be able to wire this to my 7way trailer hitch as a reverse light. | Yes, the 7-way trailer wiring has a reverse light circuit on the center pin so you could use it to power the SteelHead LED Work Light # TN66RR if you wanted. This draws...

I would like to add a reverse light on my trailer so I can see backing up. I would also like to use the four pin connector. Is it possible this is just for lights to see thinking I would use a 60-in strip on the back of the trailer? | Thanks...

Wanted to know if I can connect this to an RGB controller like you would with RGB strip lights since this is wired RGB+V | Yes, you can wire the LED Boat Accent Light # TN83FR to an RGB controller like you mentioned. This has a ground wire,...

What fuse do you recommend? And is in line fuse ok? One more thing. Do you have a wiring harnesses available for this light install? THAT would be outstanding. Thank you | The fuse needed will depend on how many of the # TN44RR lamps are installed...

Do these get connected to the brake lights since they are red? | The Mini LED Identification Light Kit for Trailers Over 80" Wide # TN26MR actually get installed to your running light circuit. I know they are red, but they are designed to be...

I am looking to purchase a livewell light, and am looking at your LED Livewell Boat Light - Recessed Mount - Waterproof - Blue LED Item # TN97RR. Question: How many lumens does this light put out? | I reached out directly to the manufacturer...

Hi, looking for replacement clearance light on my 2017 Skeeter boat trailer. I believe ez loader made them for Skeeter. | Looking at images for a 2017 Skeeter boat trailer it appears they use the Mini Clearance/Side Marker Light # TN96MR on...

What is the distance from mounting hole to mounting hole? | The TecNiq Industrial LED Scene Light # TN43XR has 3/16" diameter mounting holes spaced 16" apart on center (see attached). |

I have a single wire on my old v bar light. How do I connect this to my light network on trailer? | Since your old V-bar light only uses a single wire it grounds the light through the mounting hardware. You will simply need to add a Ring Terminal...

I bought a Water Dragon Under Water light # TN44RR and want to know if I can add another in line using the same wire and power source ? | While you can run multiple of the Water Dragon Underwater LED Lights # TN44RR on one circuit as they have...

On your Dragon underwater lights. Two wire, your video said GREEN is positive?.And the BLACK is ground?. Just want to make sure. Most of the time GREEN is for ground. BLACK or Redwood be positive. Just wanted to clarify this.i watched 3...

To put things in perspective, when you shine the light on the wall, how far is the wall away from the light? Depending on that distance, it appears the light is more of a spot light then a spreader light Thanks | In the video for the LED Boat...

Can the TN62FR be used as a navigation light on a kayak? Also, what gauge wire pigtail comes on that light? | The Green LED Boat Accent Light # TN62FR uses 18 gauge wire and you could pair this with the Red LED Boat Accent Light # TN82FR and...

watched video on lights but not sure what holds light tight on side of rv | The LED Step and Accent Light # TN92VR is designed to fit a 3/4" hole with the included grommet. The grommet will fit into the hole and then the light pushes into the...

Looking for a replacement for the Kwikee RV stair light, but wanting something with a clear lens and LED. Do you sell anything like this? | I do have a recommendation as there is not a clear lens available that fits the Light Kit for Kwikee...