Weight Capacity of Stromberg Carlson VG-15-100 5th Wheel Tailgate
Do you think it would hold up loading a golf cart on it | Stromberg Carlson states that the weight capacity of the # VG-15-100 fifth wheel tailgate is 100 lbs, so I wouldn't recommend using it to load a golf cart. The tailgate is very easy to...
Replacment for Atwood Landing Gear on 1997 AlpenLite 5th Wheel
I am working on 1997 Alpenlite fifth wheel. I bent the drivers side landing gear. It says Attwood 6/5/1996 on the motor. The dimensions of the outer black tube are 2.5 x 2.5 x 29.5. It is not connected to the other jack. It has stand alone switches...
Trailer Hitch Receiver And Bike Rack For Winnebago RV
I have a Summit Promaster bike rack on my Winnebago RV- I have a broken piece on the support tube- do you carry part # 314508-01-709? | We do not have replacement parts for the Summit Promaster bike rack nor do we carry that bike rack. Your...
Recommendation for Replacing Ladder on 2008 Carriage Domani
Hi, Looking for a replacement roof ladder for our fifth wheel. It needs to extend out from the roof a good 20inch and the old one is around 9foot long. Can you tell me what the replacement ladder would be or if you could suggest an alternative...
Can the Curt E16 Be Coupled While Slid Back Away From the Cab
I have a 2019 Ford F-250 and a 2019 Reflection 31MB. The distance between my tail gate and front of the trailer is only about 2 inches. Can the curt hitch be used to hook up only in the rear or extended position? I understand not towing in...
Replacement Landing Gear Needed for 2006 CL4005 5th Wheel Trailer
I have a 2006 CL4005 5th wheel and would like to get a new motor and gear, any suggestions on which to get? | I have a recommendation for a completely new landing gear set but if you're wanting to just replace your motor and gearbox then I'd...
Weight of Stromberg Carlson 2 Motor Home Hitch Receiver for RV Bumpers - 200 lbs Item # BA-100
How much does this item weigh? | The Stromberg Carlson # BA-100 2 inch motorhome hitch receiver weighs just a bit less than 9 lbs. The receiver is designed for use on 4 x 4 inch or 4 x 4-1/2 inch bumper and has a 200 lb capacity. The hitch...
Replacement Landing Gear Solution Where Mounting Brackets are 18-1/2 inches Apart
need replacement leg set for a 2001 Taho 5th wheel. distance between my welded brackets is 18 and 1/2 inch with a total length of 33 and 3/4 inch. hoping to use my existing motor if possible. | If you measured your landing gear like in the...
5th Wheel Tailgate Options for a 2008 GMC Sierra 2500 for 5th Wheel Trailer Hitch Towing
I am looking for an inexpensive 5th wheel tailgate to fit my 2008 GMC Sierra 2500. Do you have anything that will fit this truck? | We actually have two different fifth wheel tailgates that will work with your 2008 Sierra. If you would prefer...
How To Find Replacement Landing Gear Legs for a 1997 Fleetwood Prowler 5th Wheel
What 5th wheel landing gear will replace 1997 fleetwood Prowler? The motor is still good but the rest is going out. | In order to replace the landing gear legs on your 1997 Fleetwood Prowler I would need you to take two quick measurements of...
Stromberg Carlson Electric Tongue Jack Foot Plate Part #2500-25 Fit on Stromberg Jack
I recently purchased a SC Electric Tongue Jack and need an extra foot plate. The tube on the jack is 1 3/4. It appears the part # 2500-25 will fit perfectly. Could someone please verify? | The inner diameter of the Stromberg Carlson foot...
Replacement For Atwood 87891 Jack
I am looking for a replacement handle for an Atwood power jack. The Atwood part is #87891. Let me know if this will work. Thanks | There is one option that has the right dimensions to replace the Atwood 87891, which is a handle from Stromberg...
Bike Rack For A-Frame Trailer With Sway Bars
We have a 2018 R-Pod 190 that we'd put a bike rack onto and towing with a Grand Cherokee. Tongue has a propane tank and electric tongue lift and using Blue Ox sway bars. Current bike rack uses Class III receiver and weighs prox 40# and tandem...
Backup Camera License Plate Relocation Kit for 5th Wheel Tailgate 2018 Ram 3500
I need the male connector and it looks like the end is female. Does this product come with the male side. I ordered this same product on Amazon but the connector was identical to what I wanted to connect too, 2 females. | The Backup Camera for...
Recommended A-Frame Tool Box That Fits On Stromberg Carlson Trailer Cargo Carrier CC-255
Is there an A frame tool box that will fit into a stromberg-carlson tongue mounted storage tray? | There sure is! The RC Manufacturing T-Series Trailer Tongue Tool Box - A-Frame - Aluminum - 2.6 Cu Ft in Silver # 350970 or Black # 350980 will...
Are the StrombergCarlson Lend-a-Hand Folding RV Handrails # AC-300 Available in Left or Right Models
are the different handles depending on whether you install to the right or to the left of the door opening? The instructions say that the holes are offset towards the door to help attach to a stud. However the one i have is offset so that...
Can the Stromberg Carlson Folding Handrail for RVs be Used on a House
I recently saw a similar product installed at the front door of a house, and I was fascinated with this idea. Would there be any problem with attaching an AC-300 to a 4x4 wooden post that supports a porch roof? | Even though the folding handrail...
Bike Carrier That Can be Added to Cargo Platform
Dr ies lippert have bike wheel supports f ok r the fold d ok wn ram pop? | Lippert does not offer a bike carrier add-on for their Tailgate Storage System LC404069 but other companies do have such items. For instance, Stromberg Carlson offers...
Troubleshooting Stromberg Carlson Electric Trailer Jack # Jet-3555
Hi there. I have bought 2 stromberg Carlson jet-3555 for you guys I’ve the past year. The first I installed and the jack is great. It is quick and have no issues. The second one I bought with past few months and installed the same way as the...
Solution for Lippert Landing Gear Follow Leg that Stopped Working
The follow leg will only turn a couple of spins and then will not go any more. I know it is the follow leg as I unhooked the shaft from one leg to the other and the lead leg works fine. Now, if there is no weight on the leg, it will go up...
Recommended Replacement Ladder Options for Keystone Cougar Half-Ton
I need a replacement ladder for Keystone Cougar 26RKS. It has sticker that says:KEYSTONE 31 KS077 5-22-19. Do you have ladder that would work? | We have some great replacement ladder options for a Keystone Cougar Half-Ton like the Stromberg...
Does Jayco Fifth Wheel Require Using X Chock along with Standard Wheel Chocks
I have a 42foot Jayco fifth wheel and I always use wheel chocks in front and behind the tires but im wondering if I need x chocks also? | Using standard wheel chocks on your Jayco 5th wheel would most likely work just fine but if you wanted...
Ladder For 2016 Keystone Cougar XLite Travel Trailer
wanting to install a ladder on our rv, it did not co.e with one from the factory can it be done. | Stromberg Carlson has a RV Exterior Ladder! It just depends on what color you want. We carry a 99-1/2" x 12" # LA-401 or the black version # LA-401BA....
5th Wheel Landing Gear Lead And Follow Leg Bushing Replacements
Im looking for the bushing that connects the tube from the following leg to the lead leg on 5th wheel landing gear. | We may have a solution for you, The Follow Jack Repair Kit for Stromberg Carlson Landing Gear # LG-146060 which includes one...
Filter Your Search
Contact and Help