Best 5th Wheel Hitch For 2008 Ford F-350 Long Bed For 14,000 lb Trailer
I have a 2008 Ford F350 8 foot bed and a 2012 Heartland bighorn 3070rl which hitch is the best for this set up | We can get your 2008 Ford F-350 long bed set up with a 5th wheel hitch to pull your 2012 Heartland Bighorn 3070RL. Based on my research...
Will Rock Tamers or Roadwing Removable Mud Flaps Fit Ball Mount, # DTALBM6600, 2002 Ford F-250
Can you mount Rock Tamers on This ball mount? | I went out to the warehouse and measured the Self-Locking Adjustable Aluminum Ball Mount, # DTALBM6600, so you would be able to determine if you would be able to mount your Rock Tamers or another...
Will A 5th Wheel Hitch From A 1999 Ford F-250 Fit On A 2006 Ford F-250
Will a fifth wheel hitch off a 99 f250 fit on a 06 f250 | The Reese Universal Base Rails and Installation Kit, part # RP30035, is a universal installation kit for fifth wheel hitches that will fit both the 1999 Ford F-250 Light Duty/Super Duty...
Installation Kit Needed for Installing a Fifth Wheel Hitch on a 2005 Ford F250?
i have a 2005 ford f250 super duty ford truck that i am wanting to install the fifth wheel in can you tell me how or send me a drawing of this i need to know if i need an instalation kit for this or not .thanks | You will need an installation...
Foam Block or Pad For Carrying Kayak on TracRac Ladder Rack
MPG168. will this pad fit full size trac rac thx | We do have an option for a foam block as well as pads that will fit a TracRac ladder rack, though the block you mentioned won't fit around the wider TracRac bars. Instead, you can use the following,...
Which Bearings Does 5100lb Dexter Axle In Travel Trailer Use?
i attached the label of one of my TT axles. can you tell me the Timken bearings and seals races for that axle? i included a pic of some timken bearings and seals i got from yall several years ago from my old travel trailer. will they work...
Comparison of the Optronics Dual Face LED Square Stop, Turn, and Parking Lights
Is there a difference between the left and right hand taillights? | The Optronics Dual Face LED Drivers (# STL53ARDB) and Dual Face LED Passengers (# STL53ARPB) lights are slightly different. When positioned with the amber lens facing forward,...
Is Welding or Drilling Required to Install a 5th Wheel Trailer Hitch in a 2000 Ford Super Duty Truck
Is there any welding or holes to be drilled for installation of unit? | There is no welding required to install the Pro Series 5th wheel trailer hitch and installation kit # PS30129. But you will need to do some drilling to install the installation...
Comparing Curt 5th Wheel Trailer Hitch Installation Kits for a 2014 Ford F-250 Short Bed
What is the difference between hitch kit c 16424-104 and c16424-204 I see that with Curt A20 5th wheel w/r20 slider dual jaw 20,000 lb C16541 complete kit , it shows c16424-104 and I read in another spot that it requires a c16424-204 hitch...
Maximum Towing Capacity of the Curt Class V Trailer Hitch With or Without Weight Distribution System
I would like to confirm this Curt Hitch Part #C15410 has a towing capacity of 17,000 lbs without having to use a weight distribution system. Or is the max weight assuming a weight distribution system is used? If so, what is the max trailer...
Fifth Wheel Hitch and Rail Kit Recommendation for a 2000 Ford F-350
I recently purchased a 2000 f350 that already has a Reese fold away gooseneck hitch. It looks like an older hitch probably from 2000 or there about. I do not plan to tow a gooseneck and am in the market for a 5th wheel. My question is: Is...
Recommended Lift Kit for Dexter TorFlex Torsion Axles with 3,500 lb Capacity
trailer Lift. How do I know which # torqflex axle I have. I think the are rated at 3500 each. It there a number somewhere? Thx | The Torflex axles have different axle capacities. For capacities between 2,200 lbs and 4,000 lbs you will have...
Correct Curt Custom Brackets for Curt Base Rails on a 1999 Ford F-250 Super Duty
Noticed that some places that sell Hitch Bracket Curt C 16448 for a 1999 F 250 SD Say it will fit mine and some say it does not . Would like to know if it will . | The Curt Custom Brackets # C16443 are what you need to use for your 1999 Ford...
Turnbuckles For Frame-Mounted Tie-Downs on 2002 Ford F-350
Installing Anchor Guard Turnbuckle on frame mounted plates. I have an F350 2002 long bed dually. I recently purchased another truck mounted camper. It came with the Anchor guard turnbuckles. When I install them on my rig I was told to tighten...
Which 7-Way For 2001 Ford F-350 Super Duty
I have a 2001 Ford F350 single wheel Super duty truck. On the drivers side next to the frame, behind the rear bumper, are two plugs. I figured they were for hooking up the trailer lights. One is smaller than the other, but I dont think either...
Recommended Replacement Hub for a Boat Trailer That Has LM11949 and 25580 Bearings
I need 2 hubs with all bearings seals and races. My spindle ID is .750 Inside rear of hub 1/.750 Tire size is 4.80 x 8 Trailer is approximately 1200 lbs carry weight What other information do you need? Thanks | The bearings that will match...
Fifth Wheel Rail Kit For A 2006 Ford F-250 Super Duty
I have a 2006 Ford F-350 crew cab 8foot 4x4, is this # C16424-104 correct or what other info do I need? | Your 2006 Ford F-250 requires Curt Custom Fifth Wheel Installation Kit Item # C16448-104. Item # C16424-104 is designed to fit the 2011-2016...
Recommended Air Bag Suspension Enhancement For A 2006 Ford F-250 4WD
Im going to be ordering this auto slide setup from you, and Im trying to figure out what airbag setup i need to work with the plates provided with this demco kit. I already have the load controller and air compressor from ride rite just trying...
Correct Happijac Tie Down Kit for 2011 Ford F-250
What is the correct happy jack kit or front and back parts for a 2011 Ford F250. Are there and steak pocket tie downs that would fit this truck? The steak hole tie downs would be preferred but we already tried part #TDSF but they are to big....
Compatibility of B&W Turnoverball Gooseneck Trailer Hitch with Firestone Ride-Rite Air Springs
My question is about two products working together. I have a 2006 F250 crew 4x4 short box and looking to install both the BandW gooseneck hitch BWGNRK1108 and the Firestone air bags F2400. Is there any clearance issues? Will they work together....
Will The Reese Quick-Install Custom Base Rails Fit With The Reese 5th Wheel Trailer Hitch 16K?
will this kit work on a 30047 kwik slid e 16k manufactured in 05 | Yes, the Reese Quick-Install Custom Base Rails and Installation Kit for 5th Wheel Trailer Hitches, # RP50082-58, is a confirmed fit with the Reese 5th Wheel Trailer Hitch -...
7-Way Wiring for 2003 Ford F-350 Longbed for Lance Slide-In Truck Camper
Im looking for a plug to mount a Lance camper into the bed of my 2003 Ford F350, 8-foot bed. I have the factory towing package with the 7-pin connector on the bumper. I was referred to you by a customer who suggested C56000. After looking at...
Bearing Kit Recommendation for 6k Lippert Trailer Axles
My Fifth wheel has 6000# lippert axles. Do you sell domestic Timken Bearing kits. | We have two bearing kits that would possible work for a Lippert 6k axle. The part # BK3-100 has bearings 15123 and 25580 plus seal 10-36. This would be the kit...
7-Way Trailer Wiring Harness not Working on 2011 Ford F-350
My 7 blade plug on mt 2011 f350 is not working. I have no lights blinkers nothing. All the fuses are good and it is wired correctly. Is there anything else that I can check? | There are a number of possible issues for why the 7-way on your 2011...
Filter Your Search
Contact and Help