Are Resistors Needed When Changing a Trailer Tail Lights From Incandescent To LED?
I have heard that when replacing an older lighting unit that was not LED with an LED unit that If upgrading form halogen bulbs to led, you may need resistors to splice in or you may have hyper flash on your turn signal. Is that the case with...
Replacement Wheel and Tire For a 2015 Cruiser RV Fun Finder Travel Trailer
I am looking for a trailer wheelrim to match the others on my trailer. Is there a item # or code on the wheels so I make sure I get the correct match. My travel trailer is a 2015 Fun Finder by Cruiser RV. Thanks in advance for any assistance....
2005 Shadow Cruiser Sport T139 Trailer Cover Recommendation
Will this work for 2005 Shadow Cruiser Sport T139? We do have rain and snow. | Looking at the specs for your 2005 Shadow Cruiser Sport T139 it looks like the length ranges from 14'7" to 14'9" so the Adco Olefin HD All-Climate + Wind RV Cover...
Is Lionshead LHCS102-SI60C Center Cap Available?
do you have center wheel hub cover #LHCS102-S160C? | We do indeed offer the Lionshead # LHCS102-SI60C center cap, which you can order by using the provided link. |
Should There Be A Magnet Wired Near The Dexter EOH Actuator?
why is there a electric brake magnet wired near the dexter hydraulic brake actuator? | There would not be any kind of magnet wired near an electric over hydraulic actuator like the Dexter # K71-651. Certain setups may require an adapter module...
How To Install Trailer Brake Controller and 7-Way Trailer Connector on International 4300
Have a 2016 International 4300 with air brakes. I need to install a 7-pin trailer plug but the truck does not have any of the wiring to accommodate a trailer plug. What wiring harnesses, fuses, or relays do I need to make this work? I also...
Inner Bracket Dimensions for Buyers Products Hitch Plate with 2" Receiver Tube - Ford
What’s the inside dimension where the chassis would be? It looks like the 35 1/4 is outside to outside. | The inner bracket width of the Buyers Products Hitch Plate with 2" Receiver Tube - Ford # 3371809060A is 34-1/4" plus or minus 0.06" according...
Replacing Lippert Equa-Flex Equalizers With MORryde CRE3000 Equalizers
Hello, I am wondering which suspension equalizers I need for a Lippert LCI35-SB-86.5-68.5-NOSP-L-545-7209-18PT axle? My existing equalizers are Lippert equa-flex but have no part numbers. Does Mor-Ryde make an equalizer that will work? Thank...
Are Bushings of Correct Track Alignment Kit Never Fail
What kind of bushings is included in this kit? Are they NeverFail bushings? Pictures of the set does not match description - there are 16 brackets and 16 correction plates on the picture, but Im the description it says Includes 12 suspension...
Is There a Hitch Available for a 2002 International School Bus?
I need a hitch fir my 2002 international t444e school bus conversion to tow my 2005 ford freestyle. | To get a hitch on your 2002 International T444E School Bus, you will need to double check the width of the frame and how far the body extends...
Replacement Scissor Jacks for Cruiser RV Fun Finder FB189 Travel Trailer
I have a 2007 Fun Finder FB189, will these scissor jacks work as a replacement on my trailer? | Yes, from the specs available to me it appears your 2007 Cruiser RV Fun Finder FB189 has a dry weight of little more than 2,700 lbs. with another...
Replacement For Power Drive Awning Head with Broken Tooth
I have a 2015 Cruiser F-233rbs have one gear with tooth broken after a wind storm where it pushed up and back down hard I am able to close with a 7/16 socket one my drill with no problem, it just bumps when it hits the broken tooth. I would...
Wiring a Brake Controller to a 2007 International Trucks 4300 Series
The only wires I have been able to find on my truck also control signal lights, since brake and signal lights run off the same wire. My tow truck is a 2007 IH 4300. | We may have a solution for you. To wire a brake controller on your 2007 International...
Bike Rack Recommendation 2017 Cruiser Lite Fun Finder
I can do two options. I can mount on the front of my 2017 Ram 1500, but may limit my visibility. Can I bumper mount on my 2017 Cruiser Lite Fun Finder RV bumper? Or maybe you have another idea? Thanks. | Having a bike rack installed in the...
Recommended Landing Gear For Stabilizing A 2004 International 4300
What type on landing gear will you recommend for a 2004 International 4300 24ft 26,000GVW? I want to install one that way the truck is not shaking when forklifts go in and out. | The best option we will have is the Bulldog Square Jack - Drop...
Solution for Brake Controller that Pulses Trailer Brakes When Hazard Lights are On
need a wiring diagram to hook to a 4300 int. year 2002. problem is pulsating when hazards are on or left turn is on . not working write . they have the brake wire hooked to the left turn wire which is also brake indicator wire . I am troubling...
Availability of Tail Light Converter for LED Light Installation on 5th Wheel
I have a 2005 5th wheel RV and bought hopkins LED tail lights. it says I need a electronic turn signal converter for it to work. Do you have anything that I can use to be able to install the LED lights. the original lights are not LED. Thanks...
Does Adco RV Cover for Travel Trailers # AD67ZR Have Access Door for Right Rear
Does this Travel have a zipper access to the actual trailer entrance door Rear right side as you face the rear of the trailer ? Will this cover material scratch the Trailer siding ? Does the Height of this cover allow for A/C unit on roof...
Looking For New Wheels For A School Bus
Hello! I am looking for new wheels for a school bus. I have photos/info and am hopeful you all can help. Thanks! | Hello Aaron. I am happy to look into it and see what we can offer you. Go ahead and post what info you have in to comments below....
Rear Anti-Sway Bar for a 2004 International 4300 with Onspot Chains
I am looking for a rear sway bar kit for my 2004 International 4300 on the web site it gives the part number rm-1179-110-00 then says for pickups I need to know if I am looking at the correct part or if there is a image of the complete kit for...
Installing a Trailer Brake Controller on a 2004 International 4300
I have a 2004 international 4300 with hydralic brakes. I would like to install a brake controller along with a 7 way pin. I have found a 7 wire plug in the frame rail behind cab containing the wires for lights signals etc. but Im lost after...
Recommended Sidewinder Wedge Kit for a B&W Companion 5th Wheel Hitch
I have a B&W Companion 5th wheel hitch in my Ram 3500 with the factory puck system. Can I use the universal wedge that comes with the 5th Airborne Premium 5th Wheel Air Ride King Pin w/ Sidewinder item # RP61422 or do I need one specifically...
Difference Between Draw-Tite I Command And The Tekonsha BRAKE-EVN
Whats the difference between this controller and the older I-Command? They look identical to me.... Thanks for the assistance. | Though we no longer carry or sell The Draw-Tite I-Command The Tekonsha BRAKE-EVN Controller # TK63VR is just a...
How Tight Does Riveted Nuts of Dual Cam Sway Control Get Tightened
should I tighten the bolts that go into the rivet nut until the bracket doesnt move or is that what long back bolt is for. | The set screw of the Dual Cam setup part # RP26002 along with the rivet screws/bolts of this kit hold it in place. You'd...
Filter Your Search
Contact and Help