Replacement For Power Drive Awning Head with Broken Tooth

Updated 05/07/2019 | Published 05/06/2019

Products Featured in This Question

Replacement Drive Head for Solera Power RV Awnings - Plain Style - Black

(43)

$376.77

Replacement Front Cover for Solera Power and Crank-Style Manual RV Awning - Plain Idler Head - White

(13)

$27.22

Replacement Back Cover for Solera Power and Crank-Style Manual RV Awnings - Plain Idler Head - White

(7)

$25.74

Replacement Idler Head for Solera Power RV Awnings - Regal Style - White

(5)

$90.51

Replacement Idler Head for Solera Power RV Awnings - Regal Style - Black

(97)

$86.25

Question:

I have a 2015 Cruiser F-233rbs have one gear with tooth broken after a wind storm where it pushed up and back down hard I am able to close with a 7/16 socket one my drill with no problem, it just bumps when it hits the broken tooth. I would like to have the installation instruction so I can decide to replace gears or the complete head. Thanks

asked by: Ron R

Expert Reply:

Most factory awnings are not the Solera awnings so the Replacement Drive Head Gear Kit for Lippert Components Solera Power Awnings # LC353964 are not confirmed to fit your factory power awning head. If it is a Solera power awning head, then this kit will fit perfectly. We don't have the schematic for this head assembly so all I can give is the parts list which has some dimensions:

(1) 0.873" 20 PA 16DP, D slot gear
(1) 0.442" 20 PA 16 DP, clear zinc gear
(1) 0.500" 20 PA 16 DP, clear zinc gear
(2) # 266142 Bushings
(1) # 266143 Bushing
(1) # 281828 Bushing
(2) 1/" E-Clips
(2) 3/8" E-Clips

If this doesn't give enough clarity, then I recommend replacing the complete head using either the black # LC273478 or the white # LC672051. For the matching power idler head use # LC672052 or # LC289564 and # LC289563.