!Designer Camper  x   >   !ZDX  x   >   Performance Tool  x   >  

Looking for a replacement bearing kit with seals for a lippert 3500 lb axle Nv 145911. | The Bearing Kit # BK2-100 is the correct kit for your Lippert 3500lb axle. This will include the inner and outer races and bearings with a new grease seal,...

Hello, I just purchased from your the 7-pin connector for my 2007 Nissan Frontier. My truck already has the tow package and it previously had a 4-pin connector. I connected the 7-pin connector underneath and near the spare tire and lights work....

I have camper and a utility trailer when I hook them up to my jeep all lights work on both but when I hook them to my 2013 chevy Silverado all works but the running lights I checked all fuses they are good so what should I do next | You'll...

Can the monitor be moved to the trailer for use there? Also could the monitor be used in my house with trailer parked in my driveway? How about when the trailer is in storage several miles from my home? Can the monitor work in situations like...

Im upgrading horse trailer to led lights the side liggts are 2 wire light a red 1 and a black 1 every video ive seen the wire is white and black my question is which is ground red or the black | Trailer lamp ground wires are typically either...

trying to wire tow wire to 08 winnebago view everything works have brake signal but no brake light out of control | If you have the other lighting functions of the Hopkins 4-way part # HM48895 working but not the brake lights and you have checked...

I just bought a European imported car that has the 7 way euro trailer plug on it. My trailer has the US style 5 way plug. How can I get them to connect properly and maintain all my lights and brakes on the trailer? Do I need to completely remove...

I have a 1993 ford f 150 which never had a trailer wiring hook up and I need to know does it come from the factory with a hook up plug or do I need to hard wire it and if need to hard wire it any video available for part 20023? | While I'm not...

Hello, I have a Tekonsha # 90195 brake controller that we currently use in our Jeep Grand Cherokee. We recently purchased a 2006 BMW X5 with factory hitch 7-way. I need a harness for the BMW so that I can use the same controller between the...

Im trying to find a switch for a lippert smart jack. 2018 model. Can I purchase just the switch? Thanks. | I may have a solution for you, but I was able to reach out to my tech contact over at Lippert and he says that the switch on the Lippert...

The 2008 Jeep Commander doesnt have the plug under the dash for a plug and play brake controller installation, so youll need to hard wire the brake controller. What brake controller do you recommend? I have a 7-Way trailer connector at the...

Hello. Im trying to replace the bearings on my trailer. 2 of the hubs are dexter 8-256. | We have exactly what you need for a bearing kit for your Dexter 8-256 hub, with the correct bearing kit being the following: - Bearing Kit # BK2-100. This...

Monitor is plug to power and camera,pushed in camera button for two seconds,monitor shows no signal | If you're not seeing the blue LED on the monitor, it means that it's not getting power. You can use a circuit tester like # PTW2993 on the...

Can I use part #48195 to connect to a 5 wire wishbone trailer harness? Or should I be using part#00240? Do you sell a dust cover for either? How about screws for plastic taillight lenses? Thank you | The # 48195 would be a handy item to have...

When I apply the brakes they stay applied for about 30 seconds then release. When applied controller showed code d. c. Then brakes are released it shows code DD. Tv is 2016 Ford Escape trailer is Flagstaff t12ddst. Thanks. | When the display...

I have a 2017 Chevy Express 15 passenger van. I just wired up the Tekonsha p3 brake co troller with 7 way connector for my travel trailer. I have power to my brake controller but it seems that my running lights, turn signal lights, and brake...

Hello, I have a gooseneck enclosed trailer and the trailer brakes seem to stop working after driving for a while. They work fine when I first plug up but maybe 20 to 30 min of city driving, the brakes stop working. Tested the 7way with a tester...

Brake Light and Signal Lights not working on camper | This could be either an issue with grounding or a short in the system. A good place to start is to perform some basic troubleshooting. Try to identify if the problem is found at the tow...

I’m expanding in this question: Does a GMC Acadia Need an Upgraded Fuse Panel to Add Trailer Wiring My issue and question: The harness doesn’t work. The driver side brake light and turn signal doesn’t work. I purchased the fuses for the trailer...

I have a 2010 ram 1500 Bought the hard wire harness couldnt find the plug and play wire Having difficulty finding which wire to connectbred to on brake switch and which on 7 way for brake control There is no blue wire on 7 way | It sounds like...

When I plugged my brake controller into my furnished wiring harness under the dash, it displayed a short to battery warning. What does that mean and how can I fix this? | The short warning on the Prodigy P3 brake controller, item # 90195, is...

Ok, Ive did everything and the right turn signal still blinks when I turn on the left turn signal | If your right turn signal is blinking with the left turn signal applied that most likely means you have a short between the right turn and left...

What is the warranty on the Thomas Payne recliners with heat and massage. My heat quit working despite the indicator light remaining intact. The massage still works. Any help is greatly appreciated Thanks | The warranty on all of the now...

I have a 2012 ford f150 I have bought a led light bar ford it. when I hook it up the only light I got was the park light and nothing else | It could be a few things but first you should check to make sure the stop/turn circuits of your trailer...