Dimensions of the Bolt Holes on the Replacement Master Cylinder Assembly T4820000
Conner What is the bolt pattern for the 4 bolts on the top of the master cylinder where it attaches to the inside of the tube on part number T482000 On part number T4839100 the space between the pivot pin and bolt is 3.25 as is the one on my...
Surge Brake Actuator Recommendation for Replaced Atwood Drum to Convert to Disc
My atwood 85841 has failed and I was thinking about replacing the drum with disc brakes anyway. What would you suggest for the best setup? | Demco surge couplers like the part # DM72VR you mentioned are really great overall. We've found that...
Replacement for Reliable ACT-7.5K Brake Actuator on Mastercraft Trailer
Hey I have a Reliable ACT-7.5K and need the shock absorber SA-001 Whitch one do I have to order? Thanks | I do have a full replacement for you but we do not offer replacement parts for the Reliable ACT-7.5K Brake Actuator unfortunately. For...
Brake And Hub And Drum Assembly Recommendation
Concerning the entire brake plate assembly for trailer it has 8 1/2inch x 2 1/4inch drum 5 hole on 5 1/2inch and is a Dico product. Also need entire brake shoe assembly kit Thanks | The hydraulic drum brake assembly we offer that measures 8-1/2...
Distance Between Mounting Holes of Titan 225 Caliper Replacement
I have this part on order and not sure if it is correct, can you tell me the spacing of the mounting bolts? I asked if this was a direct replacement for Titan225, the calipers I have look more like the universal part K71-773-02. My trailer is...
Recommended Amount Of Brake Fluid For A Titan BrakeRite Electric Over Hydraulic Actuator
How full should it be filled. | I contacted Titan and they said the fluid level of their BrakeRite actuators, like the # T4834100, must be maintained within 3/8” below filler opening, which will be right at 40 cubic inches (or 0.7 quarts) of...
Where Do the Rubber Bearings Go On the Titan/Dico Model 10 Surge Brake Actuator
Are we sure that all Titan \ Dico 10 s have the rubber bearing rubber bearing t1020900 I did not find one when I pulled mine apart. Also not clear on where the rollers go. I have two rollers, its obvious the go on the pin that the bigger...
Would the Titan Disc Brake Kit # T4843300 fit a Stehl ST80TD Tow Dolly
I have a Stehl Tow Model ST80TD and need to put a brake kit on it. Will your Titan T4843300 kit work on my tow dolly to retrofit with a braking system? Thanks for the help | There's a couple pieces of information you will need to know to determine...
How Does Titan Disc Brake and Leverlock Actuator Kit T4843300 Create Brake Fluid Pressure
I am looking at the Titan disc brake kit and leverlock actuator w/electric lockout for single 3500lb axle. How does the actuator tie into the truck brakes to detect the truck brakes being depressed? I believe I have a 6 pole round connector...
eTrailer Axle Technology Trailer Hub and Drum Assembly compared to Titan Hub and Drum
I just purchase the AKHD-545-35-EZ-K, but after unboxing it and comparing to the old hub, I believe my hub resembles the T1543900CB042 more. This is off of a Pontoon boat trailer and the old hub actually has a hole in it. I assume to let...
Recommended Flexible Hydraulic Brake Line For Titan Disc Brake Kit For Single Axle Trailer
In regards to the T484330 kit there is a note at the bottom of the page that the kit is on that reads: Hydraulic Line Kit Note: If you intend to run brake lines along the axle of your trailer to install disc brakes - as is often done for boat...
Going from Hydraulic Drum Brakes to Electric Over Hydraulic Disc Brakes on Axle-Less Trailer
I currently have an ez loader with rollers trailer 3500 lb 5 on 4 1/2 axle-less system with drum surge brakes and would like to convert it using this kit. Will this work, I know I have to change the coupler as well as the wiring to a 7 pin setup,...
How to Determine if the Titan Disc Brake Kit will Fit a Trailer
Considering T4843300 disc brake kit to replace entire surge brake system on my boat trailer. trailer is a Magic tilt TAL 2044 tandem axle 6000 lb kit. The original disc brakes are on the front wheels only . Orig wheels are 13 X 4.5 JJ. Can...
Troubleshooting Titan BrakeRite SD Electric-Hydraulic Actuator Kit
I have purchased a used trailer that has the SD controller. Previous owner used A Ford truck to tow. I have a 15 GMC for tow vehicle, controller appears to have stopped working? Is controller necessary if Im using a GMC. Tripple axel trailer...
Recommended Brake Line Kit With Flexible Hoses For Single Axle Boat Trailer
I am looking at Titan disk brake kit T4843300 as a replacement for surge drum brakes on my boat trailer. Would a flexible brake line kit be available instead of the steel lines, and is there reason you would not recommend all flexible lines....
Troubleshooting a Titan BrakeRite EHB That Does Not Pressurize
Hi,I have a BrakeRite EHB installed in a boat trailer. Has been working properly for 10 years, but once after not being used for many months, the pump was working, because it was easy to hear it, but no pressure was going into the brakes. Trying...
Low Pressure on the Titan BrakeRite Electric-Hydraulic Actuator
I have a 6 yr old titan brakerite. Has always uslaly worked fine, every summer after sitting I have to clean the proportional valve needle but this year I had to replace a rubber flex brake line, bleeder system, when you pull Manuel button or...
Will Kodiak 10 inch Hub/Rotor Work as Replacement for Titan Disc Brake Kit # T4843700
Can I use the Kodiak replacement 10inch dacromat hub for a replacement to the titan kit? | Yes, the Kodiak 10" Hub-and-Rotor Assembly # KHR10D that you referenced will work as a replacement hub/drum for the Titan Disc Brake Kit # T4843400 that...
Brake Mounting Flange Availability with 1-3/4 inch Hole for Use with Titan Brake Kit T4843300
I need two Brake Backing Plate Mount Flange with 1 3/4inch weld on. Do you have any plates available that will work on this Part # T4843300 | The only 4 bolt mounting flange we offer that has a 1-3/4 inch hole in the middle is the part # 4-34...
Brake Controller to Replace 2013 Chevy Silverado 3500HD Integrated Controller
I have a 2013 Chevy Silverado 3500hd Duramax my factory itbc unit and trailer braking system is always going bad every few months something goes out or wrong with it due to me driving a lot of gravel roads and in snow a lot I want to use a aftermarket...
Mounting Hardware for Installing Titan 10" Disc Brake Kit on Timbren Axle-Less Suspension System
What mounting bolts and nuts do I need to bolt the Titan Disk brake bracet to a Timbren Axle-Less Trailer Suspension System? | To attach the brake flanges and hub assemblies for the Titan Disc Brake Kit # T4843800 to your Timbren Axle-Less...
What is Needed to Replace Hydraulic Drum Brakes with Disc Brakes?
Brake assembly On boat trailer marked 023-345-00 . Can they be replaced with disk brakes ? | You can definitely replace your current brakes with a disk brake set up. However, there are a few things that will need to be checked and upgraded to...
Bleeding a Manual Actuator like the Titan Zinc-Plated Brake Actuator w/ Electric Lockout
Hello, I purchased a Titan #T4815200 surge brake actuator with the lock out solenoid. I see you dont sell it anymore?? I am installing it on my boat trailer and need to know how to bleed the actuator please. I do have an auto style bleed...
Replacement Surge Brake Actuator for Titan Aero 6000 for Disc Brakes
Will a Titan Aero 7500 fit in place of a Titan Aero 6000? The boat trailer has disc brakes. Thanks | A Titan Aero 7500 will fit in place of your Titan Aero 6000 but the only one available for disc brakes is the Swing-Away Actuator w/ Electric...
Filter Your Search
Contact and Help