Does Draw Tite Hitch that Fits 2014 Ford Mustang Touch Rear Fascia
Does the Draw tite Hitch receiver contact the rear facia on a 2014 Mustang 6 cyl? | When the Draw Tite hitch part # 24863 is installed on your 2014 Ford Mustang it would not contact the rear bumper fascia. The hitch opening does sit really...
Recommended Tie-Downs to Secure Newer Mustangs with Limited Wheel Well Clearance to Trailer
Im at the blue print stage of my enclosed trailer. It is going to tow my 2018 Mustang Saleen and a GT 500 Mustang. Im working with them on D rings etc? I always thought the tracks would be impossible to use because i have less than 1 inch clearance...
Will Curt Trailer Hitch Fit 2007 Ford Mustang With Dual Exhaust
Will this fit a v6 mustang with a dual exhaust it has no mufflers just 2 straight pipes out the back. | Yes, the Curt Trailer Hitch Receiver # C11312 will fit your 2007 Ford Mustang V6 with dual exhaust. |
2014 Ford Mustang Roof Rack Recommendation
Hi there! Will this roof rack work for a hard-top 2014 Ford Mustang? It is a six cylinder. | The Yakima 54" Tracks for Roof Racks # Y01127 are somewhat universal in that they can be installed on a lot of different applications for you to then...
Trailer Hitch Receiver and Wiring For a 2016 Ford Mustang Convertible
To install a trailer in on my 2016 Mustang convertible it looks like i need to remove structural support to allow the exhaust system to down. is there any issue with temporally removing these supports. Are there any videos available Thanks...
Adapter Needed to Convert 2 Inch Receiver to 1-1/4 Inch Size
Hello, is there an adaptor that reduces it from a 2 down to a 1 1/4 | I believe the item you are looking for is a hitch reducer like part # HT02. This reducer will slide into an existing 2 inch receiver, allowing it to accept accessories designed...
Trailer Hitch Fit for 2018 Ford Mustang GT Convertible With Active Exhaust
Local installer says no hitch will fit a 2018 mustangGT convertable with an active exhaust because the mufflers will hit the hitch. The Draw Tite 24928 looks like it might fit but description is confusing as it does not say it will not fit...
Are Glass Pack MagnaFlow Mufflers Available For a 1998 Mustang GT
do they have glass packs for 1998 mustang gt auto and i they legal? | Glass packs are a Universal fit item that require welding for installation. You will most likely need a 2-1/2 inch diameter inlet and outlet for installation on your 1998...
Compatibility of a Thule Hitching Post Pro 4 Bike Carrier # TH934XTR with Genesis Onyx Bikes
Was considering the thule 4 hitching post pro for my bikes I have a Gensis Black Onyx and a Huffy butterscotch los nessy or something like that, would this hold the larger frame of Black Onyx without some sort of extra support system. | This...
What is Cable Lock Support Arm For Kuat Transfer 1 Made of
The lock appears to mount/attach to the support arm with a smalll nut and bolt. So, is the support arm made of metal or plastic? In other words, can’t a thief simply and quietly break the lock off of the support arm, quickly, i.e. with a grip...
Does Curt Hitch # C11312 Fit 2007 Ford Mustang with Dual Exhaust
I have a 2007 Ford Mustang V6 that I modified with dual mufflers. I’m looking at part 24747 and wondering if that product would work and the fitment will be ok since originally there was no muffler on the driver side. I want to be able to mount...
Can Superchips Flashpaq F5 Tuner Be Used to Recalibrate Speedometer on 2008 Ford Mustang
Will the unit recalibrate my speedometer? | I checked with Superchips and the correct Flashpaq F5 Tuner for your 2008 Ford Mustang GT with the 4.6L engine is the part # SU1845 (or the part # SU4845 if you live in California). This tuner can...
Rear Wheel Holder that Fits Older Thule T2 Bike Rack
I was given what I think is about a 10 year old T2 classic. Will Replacement Fat Tire Rear Wheel Holder and Strap - Thule T1 or T2 Classic Platform Bike Racks - Qty 1 work on my model? Thank you | Yes, the Thule Fat Tire Rear Wheel Holder part...
Trailer Hitch Recommendation for a 2007 Ford Mustang V6 with Dual Exhaust
Hi! So I need to purchase one of your trailer hitches for my 2007 Mustang GT. It has dual exhaust and I have a fairly expensive after market system on the car which I guard very diligently. Do you have a model that will accommodate my GTs dual...
Does Saris Bones 3 Bike Carrier # SA801BL Fit 2005 Ford Mustang Convertible with Spoiler
How does this fit on an 05 Mustang Convertible with a rear spoiler? Does it completely clear the spoiler or is there contact? We really don’t want to install a hitch but love cycling. Is there a better choice than this without a hitch? Thank...
Will The Curt Class I 1-1/4 Inch Hitch # C11210 Fit A 2011 Ford Mustang GT
I have been following this forum thread about Curt # 11210 fitment on a 2011 Ford Mustang GT. My car has a spare tire well that looks just like the one pictured that this hitch does not fit. Mine was built in September, not April. It does...
Hitch Recommendation for a 2001 Ford Mustang GT Bullit
will c11401 fit 2001 mustang gt bullitt | The Curt Hitch # C11401 will only work with Mustangs with a V6 engine. Since your 2001 Ford Mustang GT Bullitt, has a V8, it will not work for you. If you want to carry bikes on your Mustang, we...
What Bike Rack Options Are There For a 2002 Ford Mustang V6 Convertible with Rear Spoiler
Hello! I have a 2002 Ford Mustang V6 Convertible with the rear spoiler and I was wondering what kind of bike rack/carrier I could use? | You have a couple different options for a bike rack that will work with your 2002 Ford Mustang V6 Convertible...
Is Drilling Required to Install Curt Trailer Hitch C11312 on a 2005 Ford Mustang
The description for this hitch says drilling is required but the install Instructions say drilling is not required. Can you please clear this up ?? | For Curt trailer hitch # C11312 for your 2005 Ford Mustang you might have to enlarge an access...
Trailer Hitch Recommendation for 2014 Ford Mustang
Looking for a recommendation for a 2 bike carrier for a 2014 Mustang. Thank you | The most popular bike rack we carry that has been confirmed to fit this vehicle is the Thule Camber 2 part # TH9058. We asked our demo and install guys to name...
Hitch and Bike Rack Recommendation for a 2006 Ford Mustang
Is there a 2 inch hitch available for a 2006 Mustang V6. I have a nice bike rack but it requires a hitch with a 2 inch opening. The 1 1/4 would be too small. Im not going to tow, just carry bikes. | The 2-inch hitches are reserved for vehicles...
Ground Clearance Using Fulton F2 Swivel Trailer Jack with Pivoting Footplate
I would like to know the distance from the bottom of the bracket where it would bolt to the trailer and the base of the foot. | The Fulton F2 trailer jack # F1413230134 can get pretty low. I went out to the warehouse and pulled one of these...
Adapters to Use Roadmaster or Blue Ox Base Plates with Different Tow Bars
Can after market tow bar fit base plate have tow bar from tractor supply | There are some tow bars that will fit Roadmaster or Blue Ox base plates using an adapter. But I would have to know the brand and model of the tow bar to be sure. For...
Is a Spindle Washer Needed Between the Spindle Nut and Outer Bearing on Dexter 5 on 4-1/2 Hubs
On a Dexter 5 on 4 1/2 Hub, should there be a washer between the axle nut and the outer bearing? On all other trailers and cars there is a washer, none on the Dexter trailer I have, just a large nut that covers the whole bearing. | Yes, there...
Filter Your Search
Contact and Help