2019 GMC Acadia Roof Rack

Features:

These quiet, aerodynamic crossbars strap to your vehicle's raised, factory side rails to create a super-strong roof rack. Sturdy, lightweight aluminum crossbars include top channels with noise-reducing Vortex strips. Integrated locks deter theft.

Features:

This complete roof rack system mounts to your vehicle with raised, factory side rails. Full-length square crossbars work with most clamp-on carriers and accessories. Vinyl-coated steel bars are corrosion resistant. Includes locks to deter theft.

Features:

This quiet, aerodynamic roof rack mounts to your vehicle with raised, factory side rails. Crossbars accommodate accessories that mount in the T-slots or clamp around the bars. Full-length aluminum crossbars maximize carrying capacity. Includes locks.

Features:

This quiet, aerodynamic roof rack mounts to your vehicle with raised, factory side rails. Crossbars accommodate accessories that mount in the T-slots or clamp around the bars. Full-length aluminum crossbars maximize carrying capacity. Includes locks.

Features:

Sleek, crescent-shaped crossbars allow you to mount a variety of roof rack accessories to your vehicle's factory side rails. Lightweight aluminum bars can support most kayaks, canoes, and rooftop cargo carriers. Locking knobs deter theft.

Features:

This quiet, aerodynamic roof rack mounts to your vehicle with raised, factory side rails. Crossbars accommodate accessories that mount in the T-slots or clamp around the bars. Full-length aluminum crossbars maximize carrying capacity. Includes locks.

Features:

This complete roof rack system mounts to your vehicle with raised, factory side rails. Full-length square crossbars work with most clamp-on carriers and accessories. Vinyl-coated steel bars are corrosion resistant. Includes locks to deter theft.

Features:

Aerodynamic, aluminum crossbars let you build an aftermarket roof rack for your vehicle. Full-length bars provide plenty of space for carriers and accessories. Vortex strips in C-channels reduce wind noise. Theft-deterring plastic locks included.

Installation Notes:

Tech Tip:

Mount front rack rear to the front rail screws, to prevent racks interfering with vehicle sunroof.

Features:

Aerodynamic, aluminum crossbars let you build an aftermarket roof rack for your vehicle. Full-length bars provide plenty of space for carriers and accessories. Vortex strips in C-channels reduce wind noise. Theft-deterring plastic locks included.

Features:

Built for off-road use, this platform rack's large, flat surface accommodates loads of all shapes and sizes. 4 Roof rack legs install to the fixed mounting points on your vehicle's roof. Compatible with many Rhino-Rack accessories.

Features:

Aerodynamic, aluminum crossbars let you build an aftermarket roof rack for your vehicle. Full-length bars provide plenty of space for carriers and accessories. Vortex strips in C-channels reduce wind noise. Theft-deterring plastic locks included.

Features:

Low-profile, aerodynamic crossbars create an aftermarket roof rack for your vehicle. Aluminum bars have T-slots that let you mount channel-mounted carriers and accessories. Flexible rubber strips in T-slots keep out dirt and won't need trimming.

Features:

Aerodynamic, aluminum crossbars let you build an aftermarket roof rack for your vehicle. Full-length bars provide plenty of space for carriers and accessories. Vortex strips in C-channels reduce wind noise. Theft-deterring plastic locks included.

Installation Notes:

Tech Tip:

Mount front rack rear to the front rail screws, to prevent racks interfering with vehicle sunroof.

Features:

Heavy-duty crossbars mount to Yakima towers to create an aftermarket roof rack. Top and bottom channels let you add channel-mount accessories. Tie-down points in endcaps let you easily secure cargo.

Installation Notes:

Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side

Features:

Aerodynamic, aluminum crossbars let you build an aftermarket roof rack for your vehicle. Full-length bars provide plenty of space for carriers and accessories. Vortex strips in C-channels reduce wind noise. Theft-deterring plastic locks included.

Installation Notes:

Tech Tip:

Mount front rack rear to the front rail screws, to prevent racks interfering with vehicle sunroof.

Features:

This aerodynamic, flush-mount roof rack lets you carry gear and cargo on your vehicle while maintaining a clean, factory look. Crossbars work with channel-mount and clamp-on accessories. Installs on your vehicle's naked roof.

Installation Notes:

Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side

Features:

These crossbars combine the strength of steel with an aerodynamic shape to create a heavy-duty yet quiet roof rack for your vehicle. Full-length bars maximize cargo carrying capacity and work with most clamp-on accessories.

Installation Notes:

Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side

Features:

Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.

Installation Notes:

Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side

Features:

Aerodynamic, aluminum crossbars let you build an aftermarket roof rack for your vehicle. Full-length bars provide plenty of space for carriers and accessories. Vortex strips in C-channels reduce wind noise. Theft-deterring plastic locks included.

Installation Notes:

Tech Tip:

Mount front rack rear to the front rail screws, to prevent racks interfering with vehicle sunroof.

Features:

These multipurpose, galvanized steel crossbars supply the backbone for your aftermarket roof rack system. Works with accessories that clamp around the bars. Pair with Yakima towers, fit kit, and RoundBar SL Adapter to create a complete roof rack.

Installation Notes:

Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side

Features:

Premium, aerodynamic crossbars attach to Thule Edge feet to create an aftermarket roof rack for your vehicle. T-tracks with dual rubber strips let you easily install awnings, carriers, and other channel-mount accessories - no trimming required.

Installation Notes:

Tech Tip:

This application is intended to fit Denali models.

Features:

Low-profile, aerodynamic crossbars create an aftermarket roof rack for your vehicle. Aluminum bars have T-slots that let you mount channel-mounted carriers and accessories. Flexible rubber strips in T-slots keep out dirt and won't need trimming.

Features:

Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.

Installation Notes:

Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side

Features:

Aerodynamic, aluminum crossbars let you build an aftermarket roof rack for your vehicle. Full-length bars provide plenty of space for carriers and accessories. Vortex strips in C-channels reduce wind noise. Theft-deterring plastic locks included.

Installation Notes:

Tech Tip:

Mount front rack rear to the front rail screws, to prevent racks interfering with vehicle sunroof.

Features:

Premium, aerodynamic crossbars attach to Thule Edge feet to create an aftermarket roof rack for your vehicle. T-tracks with dual rubber strips let you easily install awnings, carriers, and other channel-mount accessories - no trimming required.

Installation Notes:

Tech Tip:

This application is intended to fit Denali models.

Features:

Carry cargo over your vehicle's roof with this sturdy roof rack. This no-drill system installs to raised side rails with simple tools. Crossbars work with traditional clamp-on accessories.

Features:

Premium, aerodynamic crossbars attach to Thule Edge feet to create an aftermarket roof rack for your vehicle. T-tracks with dual rubber strips let you easily install awnings, carriers, and other channel-mount accessories - no trimming required.

Installation Notes:

It is not recommended to open, vent, or retract the sun/moon/glass roof while product is installed

Tech Tip:

This application excludes Denali models.

Features:

Premium, aerodynamic crossbars attach to Thule Edge feet to create an aftermarket roof rack for your vehicle. T-tracks with dual rubber strips let you easily install awnings, carriers, and other channel-mount accessories - no trimming required.

Installation Notes:

It is not recommended to open, vent, or retract the sun/moon/glass roof while product is installed

Tech Tip:

This application excludes Denali models.

Features:

This quiet, aerodynamic roof rack mounts to your vehicle with raised, factory side rails. Crossbars accommodate accessories that mount in the T-slots or clamp around the bars. Full-length aluminum crossbars maximize carrying capacity. Includes locks.

Features:

Heavy-duty crossbars mount to Yakima towers to create an aftermarket roof rack. Top and bottom channels let you add channel-mount accessories. Tie-down points in endcaps let you easily secure cargo.

Installation Notes:

Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side

Features:

These multipurpose, galvanized steel crossbars supply the backbone for your aftermarket roof rack system. Works with accessories that clamp around the bars. Pair with Yakima towers, fit kit, and RoundBar SL Adapter to create a complete roof rack.

Installation Notes:

Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side

Features:

These crossbars combine the strength of steel with an aerodynamic shape to create a heavy-duty yet quiet roof rack for your vehicle. Full-length bars maximize cargo carrying capacity and work with most clamp-on accessories.

Installation Notes:

Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side

Features:

This quiet, aerodynamic roof rack lets you carry gear on your vehicle with fixed mounting points. Sturdy, lightweight aluminum crossbars include top channels with noise-reducing Vortex strips. Integrated locks deter theft.

Features:

Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.

Installation Notes:

Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side

Features:

Built for off-road use, this platform rack's large, flat surface accommodates loads of all shapes and sizes. Roof rack legs install to the fixed mounting points on your vehicle's roof. Compatible with many Rhino-Rack accessories.

Features:

Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.

Installation Notes:

Limited to 2 surf/sail/paddleboards. Boards must be stacked - do not carry side-by-side