Replacement Wheel Bearings, Races and Seals for a 2010 Jerry James Flat Bed Trailer

Updated 11/26/2014 | Published 11/25/2014

Question:

I have a 2010 flat bed jerr trailer has double axle with electric brakes. The far back axle with brakes..the wheel bearings are bad and need new ones. Can you help me find the right ones ?

asked by: Jr R

Expert Reply:

To determine the correct parts for your 2010 flat bed Jerry James double-axle trailer with electric brakes, you will have to remove the hub from the trailer and either get part numbers from the inner and outer bearing, and grease seal or measure the spindle in 3 places and the hub in two places.

I have included a photo showing the places to look for part numbers and places to measure. If the part numbers are not visible on your bearings and seal a dial or digital caliper will be needed to get accurate measurements.

I am including links to a FAQ page and a video that will help you when replacing the bearings, races, and seals on your trailer.

If you wish to provide your existing bearing, race and seal part numbers, and confirm your axle capacity wheel diameter and wheel bolt pattern, I can research the appropriate replacement parts for you.

expert reply by: Chris B