2 Inch Stainless Steel Hitch Ball And Bushing For Ball Mount With 1-1/4 Inch Ball Hole

Updated 11/21/2014 | Published 11/20/2014

Products Featured in This Question

2" Hitch Ball - 3/4" Diameter x 2-1/8" Long Shank - Stainless Steel - 3,500 lbs

(334)

$37.36

Hitch Ball Bushing - 1-1/4" to 1"

(21)

$5.33

2" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 7,500 lbs

(1358)

$12.62

Question:

I have a 2.5inch ball mount that has an 1 1/4inch hole for the ball. I need a 2inch stainless steel ball for this but cannot find one. All of your 2inch balls have 1inch diameter shank. Do you make a bushing or have a stainless with an 1 1/4inch shank?

asked by: Jonathan

Expert Reply:

We have exactly what you need for your ball mount.

I recommend the Hitch Ball With Medium Shank, part # 63845 along with the Hitch Ball Bushing, part # 58184. this hitch ball has a capacity of 7,500 lbs.

The bushing will slip inside the 1-1/4 inch hole on your ball mount and allow the 1 inch shank hitch ball to fit in your ball mount with no excess play. Using this bushing will not reduce the towing weight capacity or tongue weight capacity but you will be limited to the lowest rated component of your system.

expert reply by: Jeffrey L