Replacing Grease Caps of Carry-On 5x10 Single Axle Trailer With Bearing Buddies

Published 10/23/2014

Products Featured in This Question

Replacement Bearing Buddy Bras - Model 19B - (Pair)

(533)

$6.89

Bearing Buddy Bearing Protectors - Model 1980A-SS w/ Auto Check - Stainless Steel (Pair)

(1576)

$37.43

Question:

I have a 2006 Carry-On 5x10 Trailer with expanded metal sides and wood floor, with single axle. I have a Dust Cover that Measures 2 inch across and I want replace the covers with the Bearing Buddy. Do I need to buy a 2 inch Bearing Buddy?

asked by: Tommy V

Expert Reply:

To determine which side of Bearing Buddy you'd need for your existing hubs, you'll need to use an accurate measuring device like a digital caliper and measure the inside bore of your hub.

Once you find the inside diameter of the hub bore, you'll choose a Bearing Buddy with the matching diameter. For instance, if you find that the diameter of your hub bore is 1.98 inches, you'd go with a Bearing Buddy like the # BB1980A-SS.

I've linked you to the main page for bearing protectors. At the top of the page, choose the diameter of your hub bore, and you'll be shown the bearing protectors that are compatible.

expert reply by: Mike L