How to Pick Out a Hub and Wheel for a Dolly Trailer
Published 09/15/2014
Question:
I have a 1inch spindle on my dolly trailer. I am looking for wheels with tires that will fit this 1spindle. The wheels have built in bearings with a grease fitting. Do you these?
asked by: Mark T
Expert Reply:
Sounds like you need hubs and wheels. We do not carry any wheels with built-in hubs.
To pick out hubs to match your spindles you will need a few more measurements from your spindle.
Using a dial caliper or micrometer you will need to get the measurements for the seal, inner, and outer bearings area of the spindle. See the picture I attached to see where exactly to measure.
Once we have that information we can find out what hubs would fit your spindle, and then from there what wheels would fit the hub.
Product Page this Question was Asked From
Dexstar Steel Spoke Trailer Wheel - 14" x 5-1/2" Rim - 5 on 4-1/2 - White Powder Coat
- Trailer Tires and Wheels
- Wheel Only
- 14 Inch
- 5 on 4-1/2 Inch
- Steel Wheels - Powder Coat
- Dexstar
more information >
Continue Researching
- Article: Trailer Tire Sizing
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Parking Brake Kit For Activating Brakes On Both Axles Of Tandem Axle Trailer
- Q&A: Are The Kenda Tire And Wheel Combos Balanced?
- Q&A: Replacement Tire/Wheel For Trailer With 5 On 4-3/4 Bolt Pattern
- Q&A: Looking for Wheel and Tire with Bolt Pattern 5 on 4-3/4 inch
- Article: Trailer Wiring Diagrams
- Q&A: Is There a Trailer Wheel with a 5 on 4-1/4 inch Bolt Pattern
- Q&A: Is the Furrion Chill Cube Compatible W/ Existing Dometic Setup
- Q&A: What Size Rim is Needed for 205/75R14 Trailer Tire
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Most Popular Wheel Bearings
- Article: How to Install a Weight Distribution Hitch (With Pictures & Video)
- Article: How to Raise Your Travel Trailer Height