Brake Controller Recommendation for a 2014 Toyota Tundra

Published 09/11/2014

Products Featured in This Question

Tekonsha Prodigy P2 Trailer Brake Controller - 1 to 4 Axles - Proportional

(2763)

$159.00

Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - Toyota and Lexus

(1399)

$20.97

Hopkins Plug-In Simple Vehicle Wiring Harness for Factory Tow Package - 7-Way and 4-Flat Connectors

(331)

$43.02

Question:

i have a 2014 toyota tundra. i am curious to know if a brake controller is really necessary. i would be towing an enclosed trailer and also a 30ft boat. if its necessary for a brake controller what would be the best recommendation...

asked by: Jeff Q

Expert Reply:

You would want to install a brake controller. You should check with your local laws and regulations to determine what towing setups are required to have trailer brakes activated by a brake controller. Some states require trailer brakes and a brake controller on any vehicle that is towing a trailer, but in your situation I would strongly recommend one.

We recommend that at the very least if the trailer weighs over 50 percent of the weight of the tow vehicle than a brake controller should be used.

For a brake controller I would recommend the Prodigy P2 Brake Controller part # 90885. This is our best selling brake controller because of how well it works and how easy it is to setup.

If you have a factory 7-way all you would need to install the controller is the harness part # 3040-P.

If you do not have a 7-way you will also need a Hopkins Tow Package Wiring Kit # HM11143395.