Is Dexter Trailer Hub/Drum Assembly # 8-430-5UC3 a 1-Piece or 2-Piece Assembly
Updated 08/21/2014 | Published 08/20/2014
Products Featured in This Question
Question:
is this hub and drum a one piece or a 2 piece? If it is a 2 piece does it come pre-assembled or will be in two parts?
asked by: Barrett
Expert Reply:
Dexter Trailer Hub/Drum Assembly # 8-430-5UC3 is a one piece assembly, hub and drum together. It fits Dexter 9k and 10k general duty axles made after 07/01/2009.
Hub # 8-288-3UC1 is a 2 piece for 9K axle (after 10/89) and 10K axle (through 7/1/09). It does not come with the drum or mounting bolts. For a non-ABS drum use # 9-44-1. For an ABS version use # 9-44-3. And for the mounting bolt use # 7-245 (quantities of 1).
Product Page this Question was Asked From
Dexter Trailer Hub Drum Assembly - 9K to 10K - 8 on 6.5 - Oil Bath - Non-ABS Drum - After July 2009
- Trailer Hubs and Drums
- Hub with Drum
- Oil Bath
- 387A / 25580
- Standard Grade
- For 9000 lbs Axles
- For 10000 lbs Axles
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Dexter
more information >
Continue Researching
- Q&A: 10k Dexter Replacement Hub for a 8-415
- Q&A: Will Soft Start Kit for Coleman-Mach RV Air Conditioners Fit Mach 15 38009-0650 and 38209-0650
- Q&A: Determining Replacement Hub And Bearings For Dexter P-12 SLR Trailer Axle
- Q&A: Replacement Hub/Drum Assembly and Brakes for Dexter 10k Axle on Eager Beaver Deckover Trailer
- Article: Gooseneck to 5th Wheel Adapters
- Q&A: Availability of Jack Screw for Bulldog Square Jack
- Q&A: Replacement ABS Hub and Drum Assembly for 2023 Grand Design Momentum 395MS
- Q&A: Replacement Titan Surge Brake Actuator for Model 10 Part 3241639
- Article: Trailer Wiring Diagrams
- Article: Anti-Rattle Devices
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: How to Measure for Trailer Hitch Drop