bing tracking image
Q & A Icon

Does The Center Plug In The Phoenix USA Center Cap PXQ2020XL Need Anything To Stay In Place?  

Published 11/21/2026

Question:

Do I need to apply anything on the mounting bolt to keep it from coming loose?

0

Expert Reply:

Hi Bogdan!

The center plug part of the Phoenix USA Rear Wheel Center Cap - 8-1/4" Hub Diameter - Center Hole Mount - Right Thread # PXQ2020XL is meant to be removed when you want to access a Bearing Buddy or EZ-Lube fitting on the end of a spindle. So you really don't want to put anything on the threads to keep it from coming off.

With that said, I can honestly say I have never heard of one come off while driving, so it really isn't going to be necessary. Even if you don't have a Bearing Buddy or EZ-Lube spindle. However, if you really really wanted to make sure it doesn't come out, you could use some Blue Loctite. Red would be too heavy duty, but the Blue stuff is removeable.

What are you using these caps on?

expert reply by:
0
Lazer S

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>