Availability of Dexter 7-257 Drive In Wheel Stud
Published 11/13/2026 >
Products Featured in This Question
Question:
Looking for Dexter 7-257 studs. Is this something you stock?
asked by: George P
0
Expert Reply:
Thanks for reaching out George. Unfortunately, we no longer carry the Dexter 7-257 drive in wheel stud. The closest match we have would be the Kodiak Wheel Bolt - 9/16" Diameter x 2-1/2" Long # K916WB25 but this stud has a longer spline and base length than the Dexter 7-257 stud. I will attach some photos for comparison below and you may also be able to use them to locate a suitable replacement.
What type of trailer are you replacing the wheel studs on?
expert reply by:
Christopher H
0
Product Page this Question was Asked From
Dexter 7-Leaf Slipper Spring w/ Hook End for 8,000-lb Trailer Axles - 26-5/8" Long
- Trailer Leaf Springs
- Slipper Springs
- 1-5/16 Inch Eye
- 8000 lbs
- 2 Inch Wide
- 7 Leaf
- 26-5/8 Inch Long
- Standard Grade
- Dexter
more information >
Continue Researching
- Q&A: What Trailer Wiring do I Need for My 2020 Highlander without Factory Tow, with Connectors?
- Q&A: Measurement on Dexter Axle 7-Leaf Slipper Spring w/ Hook End for 8,000-lb Trailer Axles
- Q&A: Are Dexter Axle Leaf Springs Made in the USA
- Article: Slipper Spring Trailer Suspension System Review
- Q&A: Replacement Hardware List for the B&W Turnoverball Gooseneck Hitch
- Q&A: How Wide Is The Dexter 7-Leaf Slipper Spring DX73QR For 8k Axles?
- Q&A: Can You Use 8,000 lb Leaf Springs On A 7,000 lb Axle?
- Q&A: Looking For 15" Aluminum Liger Trailer Wheels
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Trailer Wiring Diagrams
- Article: RV Sway Control, Stabilization, and Suspension Enhancement
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: How to Replace Trailer Leaf Springs in 5 Steps



