Best Way To Power Backup Camera That Requires 12v Cigarette Lighter Outlet For Power

Updated 10/28/2026 | Published 10/25/2026

Question:

Our truck for the back up camera does not have a cigarette lighter. Our back uo camera cord only has a plug for a cigarette lighter. do you have one that goes into a USB. We have a outdoors RV 2022 250 titanium RKS. Thanks

asked by: Rossie C

Expert Reply:

Hey Rossie, thanks for reaching out. If you already have a backup camera system that requires a 12v cigarette lighter plug for power, I recommend just adding a cigarette lighter outlet to your truck. They are relatively inexpensive and very easy to add. You just mount the outlet in your desired location and run wires to the vehicle battery for power. We have a kit that comes with everything you'll need:

- 12 Volt Outlet Kit, 20 amps # RM-9332

What backup camera system are you using?

expert reply by: Jesse M

12 Volt Outlet Kit, 20 amps
(click to enlarge)

Bill

10/27/2026

I purchased and installed this cigarette lighter plug to power the Curt flat tow brake system in my Ford Escape hybrid plug in. Easy install and works great. I created a plug for the cigarette lighter when not in use.

Jesse M.

10/27/2026

@Bill Nice! Glad to hear the cigarette lighter outlet worked out for you. Good call on making a plug for it too! Thanks for sharing!

Ron

10/27/2026

It was really easy to hook up and I use it for my rv backup camera and radar detector

Phil J.

10/27/2026

I added one to my Jeep Gladiator . If you are a little mechanical and have access to basic tools , it was easy addition . Use their kit . Phil

Mark B.

10/27/2026

You may need more power than your USB plug can supply. I know this the case w/ my 8" Garmin GPS. On USB it is dim, your camera may be the same. The thing that could be improved is the mounting bracket does not hold the plug securely . I will try a hose clamp on it.