How Much Drop Do I Need For My Ball Mount?
Updated 10/19/2026 | Published 10/17/2026 >
Question:
How do I tell if I need a 6,8,or 10 inch my reciever is 22to the bottom of it from the ground?
asked by: Ellen H
Expert Reply:
Hey Ellen, thanks for reaching out. With the hitch on your F-350 being 22" off the ground, you will definitely need to use a ball mount with some drop, but the exact amount of drop you'll need really depends on the trailer coupler height. We want your trailer to be level when you tow.
What you'll need to do it get your trailer on level ground and lower your jack until the trailer is sitting as level as possible. Then measure from the center of the coupler ball to the ground. Then just subtract that number from 22, and the remainder will tell you approximately how much drop you'll need.
Most trailers have a coupler height around 16" so if yours is close to that you'll likely need around 6" of drop. Please measure to be sure though. Let me know what you come up with.
What kind of trailer will you be hauling?
Product Page this Question was Asked From
Curt Alumalite Aluminum Adjustable 2-Ball Mount - 2-1/2" Hitch - 8" Drop - 12.5K
- Trailer Hitch Ball Mount
- Adjustable Ball Mount
- Two Balls
- 2 Inch Ball
- 2-5/16 Inch Ball
- Aluminum Shank
- Drop - 8 Inch
- Fits 2-1/2 Inch Hitch
- 12500 lbs GTW
- CURT
more information >
Continue Researching
- Q&A: Which Weigh Safe Ball Mounts Are Made In America?
- Q&A: Replacement Trailer Hub/Drum for Part Number 2420801
- Q&A: Replacement Hubs for 8000lb Lippert Axle
- Q&A: Will the Replacement 2" and 2-5/16" Dual-Sided Ball C45923 Fit the Curt Pintle Hook C45908
- Q&A: Can Different Sized Hitch Balls be Used with Curt Pintle Hook # C45908
- Article: Trailer Wiring Diagrams
- Q&A: Distance from Bumper to Top of Curt Trailer Hitch C15703 on a 2005 Chevy Silverado 2500
- Q&A: 7-Way Trailer Connector Mounting Bracket for B&W Hitch on a 2007 Chevy Silverado Classic
- Article: The 5 Best Trailer Drop Hitches You Can Buy



