Can the Brophy Adjustable Pintle Hook Mounting Plate Be Used in the Rise Position?
Updated 10/13/2026 | Published 10/12/2026 >
Products Featured in This Question
Question:
Is there any reason this mounting plate cant be used for a 7 inch rise as well as ?
asked by: Robert B
Expert Reply:
Hi Robert,
The Brophy Adjustable Pintle Hook Mounting Plate for 2" Hitches Part # BR66MJ is only to be used in the drop position. The plates were designed and rated for the drop position for it to handle 10K, they don't recommend using it in the rise position as it wasn't tested or designed for that. We do have the B&W Heavy-Duty Pintle Plate part # BWPMHD14004 that can be used in the rise position. It's rated for 16K and would give you either 11 1/2" or rise or drop from the bottom of the shank to the top of the plate. It has six different mounting positions so you should easily be able to find a height that works for your set up.
What kind of trailer are you wanting to use this with?
Product Page this Question was Asked From
Brophy Adjustable Pintle Hook Mounting Plate for 2" Hitches - 7" Drop - 10K
- Pintle Hitch
- Mounting Plate Only
- Adjustable Height
- 10000 lbs GTW
- 2 Inch Hitch Mount
- 4 Holes
- Standard Shank
- Brophy
more information >
Continue Researching
- Q&A: Raised Pintle Hitch Mount With 25000 lb Capacity
- Q&A: 2016 Forest River Ford E350 Brake Controller Port Location
- Q&A: Replacement Components For A Schwintek Slide Out System
- Q&A: Mounting Hole Locations And Plate Thickness Required For Combination Pintle Hook 2-5/16 Ball Combo
- Q&A: What Does the Pro Series Adjustable Pintle Hook Mounting Plate Part # 63072 Come With
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Q&A: Troubleshooting Husky Brute Electric Trailer Jack That is Clicking
- Q&A: Recommended Replacement for Atwood Surge Brake Actuator 85778
- Article: Trailer Wiring Diagrams
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Which Hitches are Made in the USA
- Article: Ram Trailer Tow Prep Package
- Article: Trailer Lighting Requirements



Robert B.
10/12/2026
This will be used for pulling an army surplus M116 trailer with lunette ring behind a 1999 F250. I need the 7 inch rise to make up for the height difference between the truck and the much taller trailer. I'll go with the B&W model. Thanks.