Recommended Over-The-Cab Construction Ladder Rack for a 2017 Chevy Silverado 2500
Updated 09/28/2026 | Published 09/26/2026 >
Products Featured in This Question
Question:
In the past Ive had some racks rust on the inside of the tubes and get liquid water in there dripping rusty water down onto the paint of my truck at the cab and bed where the tubing joins together. Is the e78FV fully dipped/coated inside and out on the tubes to reduce this issue? Ive fought this by welding the joints and on one I sealed them with silicone which was not ideal. The issue also occurred at the bolt through holes. Any suggestions? Perhaps this has come up before. Thanks 2017 Silverado 2500HD with 6.5foot bed.
asked by: Fred
Expert Reply:
Welcome back Fred. The etrailer Over-The-Cab Truck Ladder Rack item # e78FV is powder coated not dipped. Like other steel tube ladder racks, the interior of the tubing isn't finished because the powder coat can't be sprayed down into them. I would definitely not try to silicone these. I'd use rubber sealant or even Flex Seal when assembling the ladder rack. You can dip the ends in one of their paint can options. You could use the spray to get down inside the tubes too.
The etrailer Over-The-Cab Truck Ladder Rack item # e78FV will fit your 2017 Chevy Silverado 2500. It comes with all hardware needed to complete the assembly and bolt the uprights to the bed rails of your truck. This ladder rack has a 1,000 lbs capacity and extends out over the cab of your truck for extra storage.
What do you plan on hauling with the new ladder rack? Feel free to answer this and throw in any other questions you have, where it says Add Comment.
Product Page this Question was Asked From
etrailer Over-The-Cab Truck Ladder Rack - Steel - 1,000 lbs
- Ladder Racks
- Truck Bed
- Fixed Rack
- Crossbar Rack
- Not Tonneau Compatible
- Over-Cab Height
- 1000 lbs
- Over the Cab
- No Drilling Required
- etrailer
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Ladder Rack
- Shop: etrailer Over-The-Cab Truck Ladder Rack - Steel - 1,000 lbs
- Q&A: What is the Difference Between the etrailer and Erickson Over-The-Cab Ladder Racks
- Q&A: is the Load Bar on the etrailer Ladder Rack Moveable? Can I Load a 6 Foot Ladder on the Rack?
- Q&A: Best Tire Chains For 275/60R20 Tires On A 2026 GMC 3500 Denali
- Q&A: Ladder Rack Recommendation for 2020 Chevy Silverado 1500 5-1/2 ft Bed
- Q&A: How Much Height Will etrailer Over-The-Cab Ladder Rack Add to Ford F-350
- Q&A: Compatibility of Pickup Truck Ladder Racks with Tonneau Covers
- Article: Best Ladder Racks
- Q&A: Recommended Ladder Rack for a 2023 Toyota Tacoma w/ Deck Rail System
- Article: How to Measure for Trailer Hitch Drop
- Article: Rooftop Cargo Carriers
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Practice Safe Trailer Towing with These 4 Tips
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: Benton Gear Spotlight!




Fred
9/28/2026
Thanks Jerred. Flexseal is a great idea. One more question. On my 2500hd Silverado. Will a full sheet 4x8 sit flat on the cross bars between the rails?