Disengaging Emergency Lever on Demco DA10 Actuator
Updated 09/29/2026 | Published 09/17/2026 >
Products Featured in This Question
Question:
I have a Demco surge brake, weld on, 12,500, a-frame, on a 1978 Airatream. How do you release break away actuator after deployed?
asked by: Daniel N
Expert Reply:
Thanks for letting us help Daniel. To disengage the emergency breakaway lever on your Demco DA10 actuator, like the # DM8105422, you'll want to use a flat-head screwdriver or similar prying tool to lift up on the lever spring. While holding the spring up, pull the emergency lever handle forward until the mechanism releases. I've included an exploded parts diagram below showing the components involved, along with Demco's instructions for disengaging the emergency lever.
You'll also want to inspect the emergency lever, lever spring, and breakaway cable for any damage. If the breakaway system was activated with significant force, one or more of these components may need to be replaced before using the trailer again.
I've listed the available replacement components below in case you find anything damaged.
Replacement Emergency Lever # DM05951
Replacement Safety Lever Spring Plate # DM05693-95
Replacement 3/32" Safety Cable for Demco Brake Actuators # DM05408
Did the breakaway lever get activated accidentally, or are you having trouble getting it to release after an actual breakaway event?
Expert Reply:
Thanks for letting us help Daniel. To disengage the emergency breakaway lever on your Demco DA10 actuator, like the # DM8105422, you'll want to use a flat-head screwdriver or similar prying tool to lift up on the lever spring. While holding the spring up, pull the emergency lever handle forward until the mechanism releases. I've included an exploded parts diagram below showing the components involved, along with Demco's instructions for disengaging the emergency lever.
You'll also want to inspect the emergency lever, lever spring, and breakaway cable for any damage. If the breakaway system was activated with significant force, one or more of these components may need to be replaced before using the trailer again.
I've listed the available replacement components below in case you find anything damaged.
Replacement Emergency Lever # DM05951
Replacement Safety Lever Spring Plate # DM05693-95
Replacement 3/32" Safety Cable for Demco Brake Actuators # DM05408
Did the breakaway lever get activated accidentally, or are you having trouble getting it to release after an actual breakaway event?
Product Page this Question was Asked From
Demco Hydraulic Brake Actuator w/ Lockout - Disc - Primed - A-Frame - 8" Channel Center - 12.5K
- Brake Actuator
- Surge Brake Actuator
- Construction Trailer
- Farm Trailer
- Weld-On
- 12500 lbs GTW
- Channel
- A-Frame Tongue
- Disc Brakes
- Electric Lockout
- Demco
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: How To Replace Surge Brake Shocks On Demco Actuator On 2004 Heritage Boat Trailer
- Q&A: Is the 3,500 lb Rating for Curt C80136 Safety Cables Per Cable or Per Pair?
- Q&A: Bolt Hole Spacing for the Demco Hydraulic Brake Actuator
- Q&A: Should Demco Surge Actuator DM8104002 be Welded or Bolted On
- Q&A: Dimensions Of Channel On Demco Hydraulic Brake Actuator DM8759422
- Q&A: Width of Demco Trailer Hydraulic Disc Brake Actuator
- Q&A: Parts Needed To Convert Demco DA66B Surge Actuator From Drum Brakes To Disc Brakes
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision





Daniel N.
9/29/2026
Accidentally deployed. Took two bolts holding assembly, loose to release just thought there had to be an easier way to release.