bing tracking image
Q & A Icon

Replacement Ramp Setup for Aluma Trailer with Fold Up Ramp Gate  

Updated 09/17/2026 | Published 09/15/2026

Question:

I’m going to buy an Aluma trailer with a fold up ramp gate. The latching system is a bit cumbersome. It has a bar, hitch pin and cotter pin. Do you have a better solution? Thank you for your time.

0

Expert Reply:

Hey Ronnie!

If the latch setup on the Aluma’s fold-up ramp gate is already looking like more hassle than you want to deal with, one option I’d seriously consider is replacing the gate setup altogether with our etrailer RapidRamps.

The RapidRamps bolt directly to the trailer and stay attached, but instead of one large gate, you get two individual aluminum ramps that can slide side-to-side to match the track width of whatever you're loading. When you're finished, they fold upright and use built-in latches to hold them securely in place, so you're not dealing with a separate bar, hitch pin, and cotter pin every time you raise or lower the ramps. The latches can also be locked while the ramps are stored upright.

We have both 5' and 6' versions, along with options depending on the width of the trailer. Each ramp is rated for 3,000 lbs, giving the pair a 6,000-lb total capacity.

Since you're still shopping for the Aluma, what model trailer are you looking at and what will you primarily be loading onto it? That'll help me narrow down which RapidRamp setup would fit best.

expert reply by:
0
Jerry B

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>