bing tracking image
Q & A Icon

What Parts Do I Need to Convert a Boat Trailer to an Electric-Over-Hydraulic (EOH) Set Up?  

Updated 09/18/2026 | Published 09/14/2026

Question:

Hello! I have a boat mate trailer tandem axle with discs all around. on the scale its 8200 lbs . i pull this regularly with a half ton truck. Im looking at possibly changing the system to EOH? thoughts? recomendations? also i was wondering if i do this the line that runs from the tongue all the way back is flexible. if i do this upgrade woul it be better to do hard line all the way back to the axles? would it perform better?

1

Helpful Expert Reply:

Hi Andrew,

Electric-over-hydraulic braking set ups offer a superior braking experience compared to a surge brake actuator on a boat trailer. Because an EOH actuator connects to the 7-way, you're able to use a brake controller to adjust braking intensity and response time, which isn't possible for a surge brake set up. It also saves you from having to get out of your truck to set the manual lockout on the surge actuator because the actuator reads the reverse signal from the 7-way and won't trigger the brakes when backing.

The Hydrastar Vented Marine Electric-Over-Hydraulic Actuator for Disc Brakes part # HS481-8067 is what I'd say is the best option for adding and EOH actuator if your truck is a Ford, Dodge, or GM with an OEM brake controller. Usually, OEM brake controllers are electric drum brake compatible, but not EOH so there is a built-in adapter in the actuator in this kit that makes the factory brake controller compatible with EOH brake set ups. The fact that you can easily plug everything in to connect it (the battery, breakaway, and actuator) makes this a super easy set up since you don't have to splice into any wiring. Hydrastar actuators are intentionally made for boat trailers as well, which makes them the go-to because not all actuators can safely be submerged.

As for the flexible lines, it's entirely up to you if you want to change the lines along the axle to hard steel lines. We have line kits that are all flexible or hard steel and flexible lines, either will work. I will say that steel lines on the tongue/frame are more durable than flexible lines because they won't expand under pressure and last longer because they're more resistant to UV and road debris. Of course, a flexible line is still required running from the main line to the caliper because the caliper moves if you decide to switch the main line to steel. To determine what line kit you need, you'll need to measure from the actuator to the first axle because that's the length of the longest line. Hydrastar has two kits with both hard steel lines and flexible, the Hydrastar Hydraulic Brake Line Kit part # HS496-152 has a 15' long main line and the Hydarstar Hydraulic Brake Line Kit part # HS496-252 has a 25' long main line. If your measurement falls between those distances, you can always get the longer line kit and cut it since it's steel.

Do you usually launch your boat in fresh or salt water?

expert reply by:
1
Claire H
Hydrastar Actuator on Boat Trailer Tongue
Hydrastar Actuator on Boat Trailer Tongue
(click to enlarge)
Calvin profile picture

Calvin

9/17/2026

I purchased this unit because i had a vaccum over hydraulic brake system that i could no longer get parts for. My trailer is a 36 feet dual tandem with 12k dexter axles. The system works okay and came with the hydraulic unit and all necessary wiring to connect into my truck existing electrical connection. The only slight difference i notice is its not quite as immeadiate response as the original system i had but it works far better than electric brakes in my opinion. I installed the unit at the front of my trailer underneath out of the way. I have hard lines from there to the other disc brakes on each axle.

Claire H. profile picture
Etrailer Expert

Claire H.

9/18/2026

@Calvin Glad to hear the system has worked out well as a replacement for your old setup! Sounds like it was a pretty straightforward install and is doing a good job handling such a heavy trailer. Thanks for sharing the details about your setup and how it compares to your previous system!
Hogtown profile picture

Hogtown

9/18/2026

Andrew, I used the Hydrastar Electric Over Hydraulic (EOH) conversion on my Tandem axle trailer that my 31Foot Fountain with twin 200's sits on. in a single work: AMAZING! I had a surge brake setup that did work, but always made me feel like I was not going to get full braking if I needed it. With the EOH system, there is instant braking help from the trailer. It brakes so well that I test the system each time I start a trip by stopping my whole rig only with the trailer brakes. I have all 4 wheels with disk brakes and would not do it any other way. One thing that is not mentioned much is this: The brakes work in both forward and reverse and on the ramp at slow speeds. Since My wife backs me in and pulls me out of the water, I have greater piece of mind knowing that the the trailer is helping to keep the rig from sliding into the water on a slick ramp. Surge brakes only work with forward momentum, never on the ramp. I have known how to make brake lines, so for durability I made a Stainless Steel line from the unit to the first axle, added a "T" fitting, then ran a single line to the second axle "T" fitting. At the second axle, I plugged the rear port on the "T". I used the the "T" fitting due to them having a bolt hole to attach them to the frame. From the fitting to the axle, I used the flexible line to drop down. On the axle I again connected between the wheels with hard line and brought them together with a "T" that the flex line connects to. The hard lines I made myself, the rest came from E-trailer. It is now 2 years old and I have pulled thousands of miles between heading to Pensacola and all the way down to Key West from Gainesville. The bottom line is that I have been super happy, and I think there are multiple reasons that this is even safer than surge brakes. I will not go back to surge brakes on my marine trailers.

Claire H. profile picture
Etrailer Expert

Claire H.

9/18/2026

@Hogtown I'm glad to hear you're so happy with your Hydrastar actuator! The difference between surge and an EOH set up is feels like night and day once you switch. Not having to worry about backing your trailer is a key feature when you're towing your boat too! Thank you so much for sharing your experience with us! Happy towing :)

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>