bing tracking image
Q & A Icon

Why Does My Hitch Not Stick Out as Far as My Previous Hitch  

Updated 09/21/2026 | Published 09/09/2026

Question:

Recently bought and installed receiver hitch from your company for 2024 Subaru outback. Installation went fine but hitch is far under bumper and have to get on my knees to put pin in. All installation holes lined up. Bought before from trailer for my 2019 outback and hitch stuck out a lot more. Any suggestions? Thanks

0

Expert Reply:

Hey Bob!

It sounds like your hitch is installed correctly, especially since all of the mounting holes lined up properly. On the 2024 Subaru Outback, the receiver on many of the available hitches sits farther underneath the rear bumper than what you may have had on your 2019 Outback. That is mainly due to the shape of the newer bumper and how the hitch is designed to tuck up underneath it for a cleaner appearance and better ground clearance.

Unfortunately, there really isn't a way to move the receiver farther rearward without changing to a different hitch design. I also wouldn't recommend using a hitch extender just to make the hitch pin easier to reach, since an extender can reduce the hitch's usable capacity and add extra movement to whatever you're carrying.

If you can send me the part number of the hitch you purchased, I can take a look at the specific design and see if we have another hitch for your 2024 Outback that places the receiver closer to the edge of the bumper.

expert reply by:
0
Jerry B
Erwin profile picture

Erwin

9/17/2026

I have the Curt hitch on my 2025 Outback and it fits perfectly. The hitch is supposed to be tucked under the bumper just like the OEM hitch so it is unobtrusive. I would say the Curt hitch is every bit as as good as the OEM Subaru hitch for 1/3 the price.

Jerry B. profile picture
Etrailer Expert

Jerry B.

9/18/2026

@Erwin Thanks for your positive feedback! I'm glad you're liking that hitch! What do you use it to tow or haul with your Outback?
Bob S. profile picture

Bob S.

9/19/2026

Thanks for reply, here are the numbers Ordet # 124486356. C69vv Bob S

Jerry B. profile picture
Etrailer Expert

Jerry B.

9/21/2026

@BobS Thanks for the info! I ran down to our warehouse to compare the # C96VV to the # C67JR and the shank length of your # C69VV came out to about 4" long from the crosstube and 7" long on the top while the # C67JR came out to about 3" and 5" in the same dimensions. Since you want a shorter receiver tube that will blend in better with your Outback, I think the # C67JR is a great option for you! Even better, our # e25TR has the exact same specifications, but it's a matte black finish instead of a high gloss.

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>