Replacement 1,000 lbs Capacity Sidewind Swivel Jack w/a Wheel for a Boat Trailer
Updated 09/12/2026 | Published 09/08/2026 >
Products Featured in This Question
Question:
I have a 26yr old Fulton 1000lb trailer jack on my boat trailer that finally gave up the ghost. It uses the weld on single bolt mount. Would like to keep the same set up if possible. 1000lbs is good enough since my trailer tongue is only a little over 200lbs. Ill use a 1200lb if I need to. Also would like to stick with Fulton but open to a different brand if can find one that bolts up to the mount.
asked by: Jim C
Expert Reply:
Welcome back Jim! To replace your Fulton boat jack, I recommend the etrailer Boat Trailer Jack w/ Wheel item # MJ-1206B. This is a 1,000 lbs capacity, sidewind swivel jack, with a 6" wheel.
Unfortunately, Fulton jacks are no longer being made because their parent company Firstbrands has filed for bankruptcy. We've been sold out of all of our inventory for quite awhile now. Another issue is that there are no other jack brands that fit the weld on Fulton jack brackets.
Our etrailer Boat Trailer Jack w/ Wheel item # MJ-1206B fits a 2" to 4" tall trailer frame and comes with it's own mounting bracket and hardware. The jack and brackets have a zinc finish that resists rust and corrosion.
What kind of boat do you have and where do you typically launch it? Feel free to answer this and throw in any other questions you have, where it says Add Comment.
Product Page this Question was Asked From
etrailer Boat Trailer Jack w/ Wheel - Sidewind - Swivel - 10" Lift - 1,000 lbs
- Trailer Jack
- Boat Trailer
- Utility Trailer
- Side-Mount Jacks
- Swivel Jacks
- Sidewind Jack
- 0 - 1000 lbs
- Manual Jack
- 10 Inch Lift
- Bolt-On
- With Wheel
- etrailer
more information >
Continue Researching
- Q&A: Best Kayak Trailer For Carrying Two NuCanoe U10 41" Wide Fishing Kayaks
- Article: Trailer Lighting Requirements
- Q&A: Can Safety Chain Retainer Be Mounted On Side Of Trailer Tongue
- Article: Best Boat Trailer Jacks
- Q&A: Trailer Tire Recommendation for 6k Axles on Equipment Trailer
- Q&A: What Size Hole Do I Drill In Bed For B&W Gooseneck Turnover Ball In 2026 GMC Sierra 2500 ?
- Q&A: Differences between the MAL25FR and the MPG46B2
- Q&A: Converting Malone MicroSport Heavy Kayak Trailer To a LowBed For Easier Loading and Unloading Kayaks
- Q&A: Can The Malone LowBed Kayak Trailer Use The Retractable Tongue Kit # MPG494
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: How to Measure a Trailer Axle
- Article: Trailer Tire Sizing
- Article: Trailer Wiring Diagrams
- Article: How to Measure for Trailer Hitch Drop






Jim C.
9/10/2026
Hi Jerred thanks for the reply. While waiting for your reply I emailed the Fulton company. Now under a company called Horizon Automotive Trading. They told me they were going to ramp back up making the trailer jacks sometime in October as they finish their "restructuring". I was very interested trying to get the Fulton XP100W0301 Jack because it will bolt right up and they said they are going to continue that line. With that said, I noticed on the jack you show that it bolts to the bracket that bolts up to the trailer frame. Could I Just use the jack and not use the mount it comes with? The bolt on the Fulton mount is welded on and it looks like the jack would bolt to it. The only thing I might have to do is modify the hole where the release pin sets in. What do you think? I have a 2000 Glastron GX205 thats in great shape with low hours. It rides on a Zieman trailer that I rehabbed, well...everything but the jack.We typically take it out to Lake Havasu in Arizona. There's not really good lakes here in SO Cal. Look forward to your response, Jim C.