Troubleshooting a Wiring Harness With No Power to 4-Flat Connector
Updated 09/09/2026 | Published 09/03/2026 >
Question:
Hi, I installed the C95ZV Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector on my 2026 Infiniti QX60 and I am not getting any power to the 4 pole flat connector. I went back through the install video and verified all steps. I tested with a multi meter and there is nothing coming to the plug. Any ideas? Thanks
asked by: Chris R
Expert Reply:
Hey Chris!
If you installed the Curt T-Connector Vehicle Wiring Harness # C95ZV on your 2026 Infiniti QX60 and you’re not getting power at any of the pins on the 4-way, I’d start by checking the harness’s 12V power connection.
The converter box on the # C95ZV needs a direct 12V power supply in order to send power out to the trailer connector. Since you’ve already gone back through the installation and verified the connections, you will need to first make sure the power wire is securely connected to the positive battery terminal and that the inline fuse near the battery is installed, not blown, and making good contact. You should also double-check that the converter box has a solid ground connection to clean, bare metal.
From there, use your multimeter to check for 12V on the power wire going into the converter box. If you have power going into the converter but nothing coming out of the 4-way when the corresponding vehicle light function is activated, that points more toward an issue with the converter box itself. If you do not have 12V going into the converter, you’ll want to work your way back toward the battery to find where power is being lost.
Also, keep in mind that the 4-way will not normally have constant 12V power at the signal pins. The brown wire should have power with the running lights on, the yellow wire with the left turn signal, and the green wire with the right turn signal.
Can you check whether you have 12V going into the converter box? That will tell us pretty quickly whether the problem is on the vehicle power side or with the # C95ZV itself.
Product Page this Question was Asked From
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Vehicle End Connector
- No Converter
- No Tow Package
- 4 Flat
- Plug and Lead
- Plug-In
- Visible
- CURT
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Tow Package for 2026 Nissan Pathfinder. What Hitch, Wiring, and Brake Controller do I Need?
- Q&A: Recommended Hitch and Wiring Harness for a 2023 Infiniti QX60
- Q&A: Recommended Hitch, Trailer Wiring, and Brake Controller for a 2026 Nissan Pathfinder
- Q&A: Looking for 4-Way Kit that Fits 2022 Nissan Frontier with Relays to Activate Trailer WIring
- Q&A: Will a Hitch Block the Liftgate Sensors on a 2025 Infiniti QX60?
- Article: My Trailer Hitch Doesn't Fit
- Q&A: Trailer Hitch and 4-way Connector Confirmed to Fit the 2022 Nissan Pathfinder
- Q&A: Recommended Weight Distribution Hitch for 2022 Keystone Springdale Mini 1750RD
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Wiring Diagrams
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Dealer Spotlight - Croft Trailer and Hitches
- Article: Best Hitch Cargo Carriers
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs

