bing tracking image
Q & A Icon

Picking Out Correct MORryde Alltrek 4000 Kit for Trailer with 7k Rated Axles  

Updated 09/09/2026 | Published 08/31/2026

Question:

I need to speekto someone about mor/rite suspension system i have 7k axle which one do I need. Problem keep breaking lead springs

0

Expert Reply:

Hey David, I would be happy to help you pick out the correct MORryde AllTrek 4000 kit for your trailer. Basically it all comes down to the distance between your axle centers. If you have 33 inches between them the correct kit you'd need is the part # MR89DR. If instead you have 35 inches you would want the part # MR29DR. Since you have higher rated axles I would be inclined to believe you have the 35 inch wheelbase.

Are you possible overloading the leaf springs? Or are you travelling on pretty rough roads?

expert reply by:
0
Jameson C
Alltrek
Alltrek
(click to enlarge)
Bill B. profile picture

Bill B.

9/5/2026

There are now 7000 miles on my Alltrek4000. The suspension also uses greased shackles. Many of the roads are very rough such that some dirt roads are smoother. I am always amazed at how things in the trailer stay in their place compared to before the new suspension, including the bed and anything on it, items stored on flat shelves, on the floor and on seating. I will always buy these products for any future trailers.

Jameson C. profile picture
Etrailer Expert

Jameson C.

9/8/2026

@BillB that's great to hear! Yeah when these came out I knew they would work well but it's great to hear feedback like this!
Bill B. profile picture

Bill B.

9/9/2026

... Forgot to mention I run the trailer tires at 80 psi, so the tires transmit more vibrations to the trailer than those at less air pressure. And the trailer weights 7000 lbs loaded. That should be all of the facts for anyone to compare to.
Jameson C. profile picture
Etrailer Expert

Jameson C.

9/9/2026

@BillB thanks for all the details!!

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>