Replacement Gooseneck Hitch for 2015 Ram 2500

Updated 09/02/2026 | Published 08/28/2026

Products Featured in This Question

B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs

(4973)

$599.00

Curt Underbed Gooseneck Trailer Hitch for Ram 2500 - 30,000 lbs

(269)

$669.95

Question:

I bought a used 2015 ram 2500 8 bed. There was a BandW turnover similar to the GNRK1384. The ball was seized completely with rust. I had to remove it completely. Im trying to find the exact same model to just quickly replace it. Some of the pictures on your website show what Im looking for. Its a two piece frame with 3 bolts holding them together. The chain loops mount to the smaller of the two frames. The loops are turned sideways compared to the one piece frame GNRK1384. Im afraid the large hole might be in a different location and I know the loops are turned 90 degrees. Do you know the part number for what Im looking for?

asked by: Jonathan F

Expert Reply:

Hey Jonathan! Do you still have the hitch to compare? The B&W Turnoverball # BWGNRK1384 has a square hole for the gooseneck hitch ball so that would really stand out. Unless it was completely rusted it would also have the gray finish. The only other option right now is the Curt Underbed Gooseneck Trailer Hitch # C60614. I believe this has the safety chain loops in the orientation you're describing.

It is also possible it is an older Reese or Draw-Tite, and neither of those are around right now. The hole for all of these is determined by the factory hole in the crossmember so that location would remain the same. The only difference might be where the safety chain loops sit.

Can you send me a picture of what you have now?

expert reply by: Robin H