Replacement Brake Options for 4,400-lb Lippert Axles
Updated 08/31/2026 | Published 08/23/2026 >
Products Featured in This Question
Question:
Hi, I am looking to purchase new electric brake assemblies for my 2013 keystone cougar xlite fifth wheel it has Lippert 4400lb axels on it, I am not finding a part number on them to compare what you guys offer, they are currently manual adjustment, I would like to switch them to self adjustment if possible . What are some parts you would recommend for a perfect fit thanks for your time its Greatly appreciated.
asked by: Chad A
Expert Reply:
Hey Chad, Happy to help.
I was able to find a great self-adjusting fit for your Keystone.
However, I did find that there have been multiple Lippert 4,400lb axle configurations over the years. To measure your brake size, the easiest way is to remove the hub/drum and measure the inside diameter of the drum (10") then the depth of the braking surface where the shoes press against the drum (2 1/4") Next, you'll want to verify that it has a 4-bolt flange with the holes 2 7/8" apart from center, both horizontally and vertically. Once we verify those measurements, we have the perfect fit.
The Lippert Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 4.4K Lippert Axles # LC66WD will be a perfect fit for the measurements above. If you find your dimensions to be different, let me know and I would be happy to find an alternative part for you.
Are you getting the Cougar ready for an upcoming trip?
Product Page this Question was Asked From
Lippert Electric Trailer Brake Assembly - 10" - Right Hand - 4,400 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- RH
- 4400 lbs
- Brake Assembly
- Self Adjust
- 10 x 2-1/4 Inch Drum
- Lippert
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Replacement Bearings, Races, Grease Seals & Brakes For Lippert 4,400LB Axle On Jayco Travel Trailer
- Q&A: Replacement Hubs and Brake Assemblies for Lippert 4,400 lb Axle
- Q&A: Replacement Brake Assemblies For Lippert 4,400LB Axle
- Q&A: Replacement Hub and Drum Assembly for Lippert 4,400 lb Axle
- Q&A: Replacement Hub/Drum And Brakes For a 2018 CrossRoads Cruiser Aire 28RD With Lippert 4.4K Axles
- Q&A: Need Dimensions For Lippert Electric Trailer Brakes LC66WD
- Q&A: Looking for Replacement Brake Assemblies and Hub/Drums for Lippert 4,400 lb Axle
- Article: Trailer Wiring Diagrams
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: 5th Wheel Hitch Installation | The Ultimate DIY Guide
- Article: How to Measure for Trailer Hitch Drop
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub

